Chưa cập nhật
品番: 3RA2816-0EW20
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ ra số SIEMENS 6ES7322-1BL00-0AA0. Supply voltage / Load voltage L+ / Rated value (DC): 24 V; Supply voltage / Load voltage L+ / permissible range, lower limit (DC): 20.4 V; Supply voltage / Load voltage L+ / permissible range, upper limit (DC): 28.8 V.
品番
6ES7322-1BL00-0AA0
単位
Cái
供給状況
Liên hệ báo giá
必要数量 (Cái)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7322-1BL00-0AA0 |
| Tên gọi chính hãng | ***spare part*** SIMATIC S7-300, digital output SM 322, isolated, 32 DO, 24 V DC, 0.5 A, 1x 40-pole, total current 4 A/group (16 A/module) |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V |
| Supply voltage / Load voltage L+ / permissible range, lower limit (DC) | 20.4 V |
| Supply voltage / Load voltage L+ / permissible range, upper limit (DC) | 28.8 V |
| Input current / from load voltage L+ (without load), max. | 160 mA |
| Input current / from backplane bus 5 V DC, max. | 110 mA |
| Power loss / Power loss, typ. | 6.6 W |
| Digital outputs / Số ngõ ra số | 32 |
| Digital outputs / Short-circuit protection | Yes; Electronic |
| Digital outputs / Response threshold, typ. | 1 A |
| Digital outputs / Limitation of inductive shutdown voltage to | L+ (-53 V) |
| Digital outputs / Controlling a digital input | Yes |
| Digital outputs / Switching capacity of the outputs / on lamp load, max. | 5 W |
| Digital outputs / Load resistance range / lower limit | 48 Ω |
| Digital outputs / Load resistance range / upper limit | 4 k Ω |
| Digital outputs / Output voltage / for signal "1", min. | L+ (-0.8 V) |
| Digital outputs / Output current / for signal "1" rated value | 0.5 A |
| Digital outputs / Output current / for signal "1" permissible range for 0 to 40 °C, min. | 5 mA |
| Digital outputs / Output current / for signal "1" permissible range for 0 to 40 °C, max. | 0.6 A |
| Digital outputs / Output current / for signal "1" permissible range for 40 to 60 °C, min. | 5 mA |
| Digital outputs / Output current / for signal "1" permissible range for 40 to 60 °C, max. | 0.6 A |
| Digital outputs / Output current / for signal "1" minimum load current | 5 mA |
| Digital outputs / Output current / for signal "0" residual current, max. | 0.5 mA |
| Digital outputs / Output delay with resistive load / "0" to "1", max. | 100 μs |
| Digital outputs / Output delay with resistive load / "1" to "0", max. | 500 μs |
| Digital outputs / Parallel switching of two outputs / for uprating | No |
| Digital outputs / Parallel switching of two outputs / for redundant control of a load | Yes; only outputs of the same group |
| Digital outputs / Switching frequency / with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz |
| with inductive load (acc. to IEC 60947-5-1, DC13), max. | 0.5 Hz |
| on lamp load, max. | 10 Hz |
| Total current of the outputs (per group) / horizontal installation / up to 40 °C, max. | 4 A |
| Total current of the outputs (per group) / horizontal installation / up to 60 °C, max. | 3 A |
| Total current of the outputs (per group) / vertical installation / up to 40 °C, max. | 2 A |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Interrupts/diagnostics/status information / Alarms | No |
| Interrupts/diagnostics/status information / Diagnostics function | No |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | No |
| Interrupts/diagnostics/status information / Diagnoses / Diagnostic information readable | No |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | No |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | No |
| Interrupts/diagnostics/status information / Diagnoses / Missing load voltage | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Rated load voltage PWR (green) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Fuse OK FSG (green) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Group error SF (red) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator digital output (green) | Yes; per channel |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel fault indicator F (red) | No |
| Potential separation / Potential separation digital outputs / between the channels | Yes |
| Potential separation / Potential separation digital outputs / between the channels, in groups of | 8 |
| Potential separation / Potential separation digital outputs / between the channels and backplane bus | Yes; Optocoupler |
| Isolation / Isolation tested with | 500 V DC |
| Connection method / required front connector | 40-pin |
| Dimensions / Chiều rộng | 40 mm |
| Dimensions / Chiều cao | 125 mm |
| Dimensions / Chiều sâu | 120 mm |
| Weights / Khối lượng xấp xỉ | 260 g |
品番: 3RA2816-0EW20
品番: 3RT2035-1NB30
品番: DI810
品番: Q64AD
Quy trình đối chiếu cảm biến thay thế theo cơ khí, điện và chức năng. Có ma trận kiểm tra, ví dụ tình huống và hồ sơ cần gửi để xác minh.
Chọn cáp cảm biến M8/M12 theo đầu đực/cái, số cực, coding, sơ đồ chân và môi trường. Có hình minh họa, bảng kiểm và mẫu yêu cầu báo giá.
Giải thích NO/NC của cảm biến, bảng trạng thái khi có vật và cách phân biệt với PNP/NPN. Checklist kiểm tra trước khi đặt mua hoặc thay thế.
