Chưa cập nhật
品番: 3RA2816-0EW20
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ vào số SIEMENS 6ES7521-1BL10-0AA0. General information / Tên kiểu sản phẩm: DI 32x24VDC BA; General information / HW functional status: FS01; General information / Firmware version: V1.0.0.
品番
6ES7521-1BL10-0AA0
単位
Cái
供給状況
Liên hệ báo giá
必要数量 (Cái)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7521-1BL10-0AA0 |
| Tên gọi chính hãng | SIMATIC S7-1500/ET 200MP, digital input module, DI 32x24 V DC BA (25 mm); sinking input; 32 channels in groups of 16; input type 3 according to IEC 61131; input delay typ. 3.2 ms; including U-connector and front connector push-in |
| General information / Tên kiểu sản phẩm | DI 32x24VDC BA |
| General information / HW functional status | FS01 |
| General information / Firmware version | V1.0.0 |
| General information / FW update possible | Yes |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Product function / Prioritized startup | Yes |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V13 / V13 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | V2.3 / - |
| General information / Operating mode / DI | Yes |
| General information / Operating mode / Counter | No |
| General information / Operating mode / MSI | Yes |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Power / Power consumption from the backplane bus | 1.05 W |
| Power loss / Power loss, typ. | 3 W |
| Digital inputs / Số ngõ vào số | 32 |
| Digital inputs / Digital inputs, parameterizable | No |
| Digital inputs / Sourcing/sinking input | P-reading |
| Digital inputs / Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital inputs / Input voltage / Rated value (DC) | 24 V |
| Digital inputs / Input voltage / for signal "0" | -30 to +5 V |
| Digital inputs / Input voltage / for signal "1" | +11 to +30V |
| for signal "1", typ. | 2.7 mA |
| Input delay (for rated value of input voltage) / for standard inputs / parameterizable | No |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", min. | 3 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max. | 4 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", min. | 3 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", max. | 4 ms |
| Input delay (for rated value of input voltage) / for interrupt inputs / parameterizable | No |
| Input delay (for rated value of input voltage) / for technological functions / parameterizable | No |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Encoder / Connectable encoders / 2-wire sensor | Yes |
| Encoder / Connectable encoders / permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Interrupts/diagnostics/status information / Diagnostics function | No |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | No |
| Interrupts/diagnostics/status information / Alarms / Hardware interrupt | No |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage | No |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | No |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / RUN LED | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / ERROR LED | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | No |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels, in groups of | 16 |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Potential separation / Potential separation channels / between the channels and the power supply of the electronics | No |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Security / signed firmware update | No |
| Security / data integrity | No |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 40 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions / Chiều rộng | 25 mm |
| Chiều cao | 147 mm |
| Chiều sâu | 129 mm |
| Weights / Khối lượng xấp xỉ | 260 g |
| Other / Note: | Supplied incl. 40-pole push-in front connectors |
品番: 3RA2816-0EW20
品番: 3RT2035-1NB30
品番: DI810
品番: Q64AD
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
Phân biệt ren G, R, NPT theo hình dạng, tài liệu và cơ chế làm kín. Có ảnh minh họa, quy trình nhận diện và checklist đặt đầu nối.
