Chưa cập nhật
品番: 3RA2816-0EW20
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Bộ điều khiển PLC SIEMENS 6ES7511-1FK02-0AB0. General information / Tên kiểu sản phẩm: CPU 1511F-1 PN; General information / HW functional status: FS03; General information / Firmware version: V2.8.
品番
6ES7511-1FK02-0AB0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7511-1FK02-0AB0 |
| Tên gọi chính hãng | *** spare part *** SIMATIC S7-1500F, CPU 1511F-1 PN, central processing unit with work memory 225 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 2-port switch, 60 ns bit performance, SIMATIC Memory Card required |
| General information / Tên kiểu sản phẩm | CPU 1511F-1 PN |
| General information / HW functional status | FS03 |
| General information / Firmware version | V2.8 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | Yes; Distributed and central; with minimum OB 6x cycle of 625 μs (distributed) and 1 ms (central) |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V16 (FW V2.8) / V15 (FW V2.5) or higher; with older TIA Portal versions configurable as 6ES7511-1FK01-0AB0 |
| Configuration control / via dataset | Yes |
| Display / Screen diagonal [cm] | 3.45 cm |
| Control elements / Number of keys | 8 |
| Control elements / Mode buttons | 2 |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Supply voltage / Mains buffering / Mains/voltage failure stored energy time | 5 ms |
| Supply voltage / Mains buffering / Repeat rate, min. | 1/s |
| Input current / Current consumption (rated value) | 0.7 A |
| Input current / Current consumption, max. | 0.95 A |
| Input current / Inrush current, max. | 1.9 A; Rated value |
| Input current / I²t | 0.02 A²·s |
| Power / Infeed power to the backplane bus | 10 W |
| Power / Power consumption from the backplane bus (balanced) | 5.5 W |
| Power loss / Power loss, typ. | 5.7 W |
| Storage / Number of slots for SIMATIC memory card | 1 |
| Storage / SIMATIC memory card required | Yes |
| Work memory / integrated (for program) | 225 kbyte |
| Work memory / integrated (for data) | 1 Mbyte |
| Load memory / Plug-in (SIMATIC Memory Card), max. | 32 Gbyte |
| Backup / maintenance-free | Yes |
| CPU processing times / for bit operations, typ. | 60 ns |
| CPU processing times / for word operations, typ. | 72 ns |
| CPU processing times / for fixed point arithmetic, typ. | 96 ns |
| CPU processing times / for floating point arithmetic, typ. | 384 ns |
| CPU-blocks / Number of elements (total) | 2 000; Blocks (OB, FB, FC, DB) and UDTs |
| CPU-blocks / DB / Number range | 1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999 |
| CPU-blocks / DB / Size, max. | 1 Mbyte; For DBs with absolute addressing, the max. size is 64 KB |
| CPU-blocks / FB / Number range | 0 ... 65 535 |
| CPU-blocks / FB / Size, max. | 150 kbyte |
| CPU-blocks / FC / Number range | 0 ... 65 535 |
| CPU-blocks / FC / Size, max. | 150 kbyte |
| CPU-blocks / OB / Size, max. | 150 kbyte |
| CPU-blocks / OB / Number of free cycle OBs | 100 |
| CPU-blocks / OB / Number of time alarm OBs | 20 |
| CPU-blocks / OB / Number of delay alarm OBs | 20 |
| CPU-blocks / OB / Number of cyclic interrupt OBs | 20; With minimum OB 3x cycle of 500 μs |
| CPU-blocks / OB / Number of process alarm OBs | 50 |
| CPU-blocks / OB / Number of DPV1 alarm OBs | 3 |
| CPU-blocks / OB / Number of isochronous mode OBs | 2 |
| CPU-blocks / OB / Number of technology synchronous alarm OBs | 2 |
| CPU-blocks / OB / Number of startup OBs | 100 |
| CPU-blocks / OB / Number of asynchronous error OBs | 4 |
| CPU-blocks / OB / Number of synchronous error OBs | 2 |
| CPU-blocks / OB / Number of diagnostic alarm OBs | 1 |
| CPU-blocks / Nesting depth / per priority class | 24; Up to 8 possible for F-blocks |
| Counters, timers and their retentivity / S7 counter / Number | 2 048 |
| S7 counter / Retentivity / adjustable | Yes |
| Counters, timers and their retentivity / IEC counter / Number | Any (only limited by the main memory) |
| IEC counter / Retentivity / adjustable | Yes |
| Counters, timers and their retentivity / S7 timer / Number | 2 048 |
| S7 timer / Retentivity / adjustable | Yes |
| Counters, timers and their retentivity / IEC timer / Number | Any (only limited by the main memory) |
| IEC timer / Retentivity / adjustable | Yes |
| Data areas and their retentivity / Retentive data area (incl. timers, counters, flags), max. | 128 kbyte; In total; available retentive memory for bit memories, timers, |
| Extended retentive data area (incl. timers, counters, flags), max. | 1 Mbyte; When using PS 6 0W 24/48/60 V DC HF |
| Flag / Size, max. | 16 kbyte |
| Flag / Number of clock memories | 8; 8 clock memory bit, grouped into one clock memory byte |
| Data blocks / Retentivity adjustable | Yes |
| Data blocks / Retentivity preset | No |
| Local data / per priority class, max. | 64 kbyte; max. 16 KB per block |
| Address area / Number of IO modules | 1 024; max. number of modules / submodules |
| Address area / I/O address area / Inputs | 32 kbyte; All inputs are in the process image |
| Address area / I/O address area / Outputs | 32 kbyte; All outputs are in the process image |
| I/O address area / per integrated IO subsystem / Inputs (volume) | 8 kbyte |
| I/O address area / per integrated IO subsystem / Outputs (volume) | 8 kbyte |
| I/O address area / per CM/CP / Inputs (volume) | 8 kbyte |
| I/O address area / per CM/CP / Outputs (volume) | 8 kbyte |
| Address area / Subprocess images / Number of subprocess images, max. | 32 |
| Hardware configuration / Number of distributed IO systems | 32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link) |
| Hardware configuration / Number of DP masters / via CM | 4; A maximum of 4 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total |
| Hardware configuration / Number of IO Controllers / Integrated | 1 |
| Hardware configuration / Number of IO Controllers / via CM | 4; A maximum of 4 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total |
| Hardware configuration / Rack / Modules per rack, max. | 32; CPU + 31 modules |
| Hardware configuration / Rack / Number of lines, max. | 1 |
| Hardware configuration / PtP CM / Number of PtP CMs | the number of connectable PtP CMs is only limited by the number of available slots |
| Time of day / Clock / Type | Hardware clock |
| Time of day / Clock / Backup time | 6 wk; At 40 °C ambient temperature, typically |
| Time of day / Clock / Deviation per day, max. | 10 s; Typ.: 2 s |
| Time of day / Operating hours counter / Number | 16 |
| Time of day / Clock synchronization / supported | Yes |
| Time of day / Clock synchronization / in AS, master | Yes |
| Time of day / Clock synchronization / in AS, device | Yes |
| Time of day / Clock synchronization / on Ethernet via NTP | Yes |
| Interfaces / Số giao diện PROFINET | 1 |
| 1. Interface / Interface types / RJ 45 (Ethernet) | Yes; X1 |
| 1. Interface / Interface types / Number of ports | 2 |
| 1. Interface / Interface types / integrated switch | Yes |
| IP protocol | Yes; IPv4 |
| PROFINET IO Controller | Yes |
| PROFINET IO Device | Yes |
| SIMATIC communication | Yes |
品番: 3RA2816-0EW20
品番: 3RT2035-1NB30
品番: 6MF2805-0AA00
品番: 6ES7440-1CS00-0YE0
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
