Van khí
品番: MSFG-24-EX
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Cảm biến tiệm cận FESTO SDBT-BSW-1L-PU-W-0.3-N-M12. Design: For T-slot; Based on standard: EN 60947-5-2; Approval: RCM c UL us - Listed (Oil).
品番
SDBT-BSW-1L-PU-W-0.3-N-M12
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | SDBT-BSW-1L-PU-W-0.3-N-M12 |
| Mã vật tư FESTO | 2476855 |
| Design | For T-slot |
| Based on standard | EN 60947-5-2 |
| Approval | RCM c UL us - Listed (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| Note on materials | RoHS compliant |
| Instructions on use | https://www.festo.com/Drive-Sensor-Overview |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Nhiệt độ môi trường | -25 °C...85 °C |
| Max. travel speed | 1 m/s |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching behavior during welding process | Output signal freezes |
| Switching element function | N/O contact |
| Switch-on time | 15 ms |
| Switch-off time | 25 ms |
| Max. switching frequency | 25 Hz |
| Max. output current | 100 mA |
| Max. output current using mounting kits | 100 mA |
| Max. switching capacity DC | 2.8 W |
| Max. switching capacity DC using mounting kits | 2.8 W |
| Voltage drop | 1.5 V |
| Inductive protective circuit | Adapted to MZ, MY, ME coils |
| Min. load current | 0 mA |
| Off-state current | 0.005 mA |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Rated operational voltage DC | 24 V |
| Operational voltage range DC | 10 V...30 V |
| Residual ripple | 10% |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connector system | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection 1, number of connections/cores | 3 |
| Electrical connection 1, type of mounting | Screw-type lock Rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with rotatable/non-rotatable screw-type lock |
| Connection outlet orientation | In-line |
| Material electrical contact | Brass, nickel-plated and gold-plated |
| Material connector housing | TPE-U(PU) |
| Material screw-type lock | Brass, nickel-plated |
| Test conditions cable | Bending strength: to Festo standard Test conditions on request |
| Cable length | 0.3 m |
| Cable characteristic | Resistant to welding spatter |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-U(PUR) |
| Material insulating sheath | PP |
| Type of mounting | Screw-clamped Insertable in the slot from above |
| Max. tightening torque | 0.6 Nm |
| Vị trí lắp đặt | Any |
| Khối lượng sản phẩm | 23.3 g |
| Housing colour | Black |
| Vật liệu thân | Epoxy resin Reinforced PA High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Function reserve indication | Orange LED |
| Ambient temperature with moving cable | -5 °C...80 °C |
| Cấp bảo vệ | IP65 IP68 |
| LABS (PWIS) conformity | VDMA24364-B2-L |
品番: MSFG-24-EX
品番: DNC-100-PPVA
品番: VZBA-2"-GG-63-T-22-F0507-V4V4T
品番: DGC-18-450-KF-PPV-A
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
