Chưa cập nhật
品番: NZM1-XTVDVR
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Cầu dao cách ly Eaton P1-25/I2/SVB. Product Length/Depth: 115 mm; Product Height: 180 mm.
品番
P1-25/I2/SVB
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | P1-25/I2/SVB |
| Mã đặt hàng Eaton | 207293 |
| Model Eaton | P1-25/I2/SVB |
| Product Length/Depth | 115 mm |
| Product Height | 180 mm |
| Product Width | 100 mm |
| Product Weight | 0.455 kg |
| Number of poles | 3 |
| Degree of protection | NEMA 12 |
| Degree of protection (front side) | IP65 |
| Mounting method | Surface mounting |
| Mounting position | As required |
| Operating frequency | 1200 Operations/h |
| Overvoltage category | III |
| Pollution degree | 3 |
| Rated impulse withstand voltage (Uimp) | 6000 V AC |
| Switching angle | 90 ° |
| Ambient operating temperature - min | -25 °C |
| Ambient operating temperature - max | 40 °C |
| Ambient operating temperature (enclosed) - min | -25 °C |
| Ambient operating temperature (enclosed) - max | 40 °C |
| Tightening torque | 14.1 lb-in, Screw terminals 1.6 Nm, Screw terminals |
| Rated breaking capacity at 220/230 V (cos phi to IEC 60947-3) | 190 A |
| Rated breaking capacity at 400/415 V (cos phi to IEC 60947-3) | 150 A |
| Rated breaking capacity at 500 V (cos phi to IEC 60947-3) | 170 A |
| Rated breaking capacity at 660/690 V (cos phi to IEC 60947-3) | 150 A |
| Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V | 19.6 A |
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V | 15.2 A |
| Rated operational current (Ie) at AC-3, 500 V | 12.1 A |
| Rated operational current (Ie) at AC-3, 660 V, 690 V | 8.8 A |
| Rated operational current (Ie) at AC-21, 440 V | 25 A |
| Rated operational current (Ie) at AC-23A, 400 V, 415 V | 25 A |
| Rated operational current (Ie) at AC-23A, 500 V | 17.4 A |
| Rated operational current (Ie) at AC-23A, 690 V | 12.6 A |
| Rated operational current (Ie) at DC-1, load-break switches l/r = 1 ms | 25 A |
| Rated operational current (Ie) at DC-23A, 24 V | 25 A |
| Rated operational current (Ie) at DC-23A, 48 V | 25 A |
| Rated operational current (Ie) at DC-23A, 60 V | 25 A |
| Rated operational current (Ie) at DC-23A, 120 V | 12 A |
| Rated operational power at AC-3, 380/400 V, 50 Hz | 7.5 kW |
| Rated operational power at AC-3, 415 V, 50 Hz | 7.5 kW |
| Rated operational power at AC-3, 500 V, 50 Hz | 7.5 kW |
| Rated operational power at AC-3, 690 V, 50 Hz | 7.5 kW |
| Rated operational power at AC-23A, 220/230 V, 50 Hz | 5.5 kW |
| Rated operational power at AC-23A, 400 V, 50 Hz | 13 kW |
| Rated operational power at AC-23A, 500 V, 50 Hz | 11 kW |
| Rated operational power at AC-23A, 690 V, 50 Hz | 11 kW |
| Rated operational voltage (Ue) at AC - max | 690 V |
| Rated uninterrupted current (Iu) | 25 A |
| Uninterrupted current | Rated uninterrupted current Iu is specified for max. cross-section. |
| Rated conditional short-circuit current (Iq) | 80 kA |
| Short-circuit protection rating | 25 A gG/gL, Fuse, Contacts |
| Number of contacts in series at DC-23A, 24 V | 1 |
| Number of contacts in series at DC-23A, 48 V | 2 |
| Number of contacts in series at DC-23A, 60 V | 2 |
| Number of contacts in series at DC-23A, 120 V | 3 |
| Rated making capacity up to 690 V (cos phi to IEC/EN 60947-3) | 240 A |
| Voltage per contact pair in series | 60 V |
| Number of auxiliary contacts (change-over contacts) | 0 |
| Number of auxiliary contacts (normally closed contacts) | 0 |
| Number of auxiliary contacts (normally open contacts) | 0 |
| Actuator color | Red |
| Actuator type | Door coupling rotary drive |
| Heat dissipation per pole, current-dependent Pvid | 1.1 W |
| Rated operational current for specified heat dissipation (In) | 25 A |
| Static heat dissipation, non-current-dependent Pvs | 0 W |
| 10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. |
| 10.3 Degree of protection of assemblies | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. |
| 10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. |
| 10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
品番: NZM1-XTVDVR
品番: P3-100/EA/SVB
品番: P1-25/EA/SVB
品番: M22-K01
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
