Chưa cập nhật
品番: 131150435
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Công tắc từ reed Schmersal 101133843.
品番
101133843
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 101133843 |
| Mã đặt hàng Schmersal | 101133843 |
| Model Schmersal | BN 310-RZ |
| Working principle | Magnetic drive |
| Housing construction form | rectangular |
| Housing material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 65 g |
| Latching | Yes |
| Suitable for elevators | Yes |
| Number of snap-in contacts | 1 |
| Actuating panels | lateral |
| Actuating element | Magnet |
| Actuating speed, maximum | 18 m/s |
| Mounting | Enclosure with mounting slots |
| Switching distance Sn | 2 x BP 10N = 20 mm 2 x BP 10S = 20 mm 2 x BP 11N = 3 ... 25 mm 2 x BP 11S = 3 ... 25 mm 2 x BP 12N = 10 ... 30 mm 2 x BP 12S = 10 ... 30 mm 2 x BP 15/2N = 22 mm 2 x BP 15/2S = 22 mm 2 x BP 21N = 20 ... 60 mm 2 x BP 21S = 20 ... 60 mm 5 mm ... 60 mm BE 20N = 20 mm BE 20S = 20 mm BP 10N = 15 mm BP 10S = 15 mm BP 11N = 15 mm BP 11S = 15 mm BP 12N = 20 mm BP 12S = 20 mm BP 15N = 17 mm BP 15S = 17 mm BP 20N = 3 ... 25 mm BP 20S = 3 ... 25 mm BP 21N = 15 ... 45 mm BP 21S = 15 ... 45 mm BP 31N = 3 ... 25 mm BP 31S = 3 ... 25 mm BP 34N = 15 ... 30 mm BP 34S = 15 ... 30 mm |
| Note (Switching distance Sn) | Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or n |
| Note (switching distance) | All switching distances in accordance EN IEC 60947-5-2 |
| Repeat accuracy R | 0.3 mm |
| Length of cable | 1 m |
| Number of cable wires | 2 |
| Wire cross-section | 0.75 mm2 | 18 AWG |
| Material of the Cable mantle | PVC |
| Cable type | H03VV-F |
| Length of sensor | 13 mm |
| Width of sensor | 88 mm |
| Height of sensor | 25 mm |
| IP Degree of protection | IP67 |
| Ambient temperature | -25 ... +75 °C |
| Resistance to vibrations | 10 ... 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Switching voltage, maximum | 250 VAC | 250 VDC |
| Switching current, maximum | 3 A |
| Switching capacity, maximum | 120 W | 120 VA |
| Switching principle | Latching |
| Bounce duration, minimum | 0.3 ms |
| Bounce duration, maximum | 0.6 ms |
| Switching frequency, maximum | 300 Hz |
| Maximum switching time close (NO) | 1.5 ms |
| Maximum switching time open (NC) | 1.5 ms |
| Minimum switching time close (NO) | 0.3 ms |
| Recommendation (actuator) | 2 x BP 15/2 N 2x BP 10 N 2x BP 10 S 2x BP 11 N 2x BP 11 S 2x BP 12 N 2x BP 12 S 2x BP 15/2 S 2x BP 21 N 2x BP 21 S BE 20 N(S) 48VDC BE 20 N(S) ST 24VDC BP 10 N BP 10 S BP 11 N BP 11 S BP 12 N BP 12 S BP 15 N BP 15 S BP 20 N BP 20 S BP 21 N BP 21 S BP 31 N BP 31 S BP 34 N BP 34 S |
| Recommendation (actuator, lift switchgear) | 2 x BP 10 2 x BP 15 2 x BP 15/2 BP 10 BP 15 BP 34 |
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact. |
品番: 131150435
品番: 151180590
品番: 103040784
品番: 101204612
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
