Chưa cập nhật
품목 코드: 131150435
- 단위
- Chưa cập nhật
콘텐츠 불러오는 중…
콘텐츠 불러오는 중…
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.
Khóa liên động điện từ Schmersal 103001423.
품목 코드
103001423
단위
Chưa cập nhật
공급 상태
견적 문의
필요 수량 (Chưa cập nhật)
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.
| 속성 | 제품 사양 |
|---|---|
| Mã sản phẩm | 103001423 |
| Mã đặt hàng Schmersal | 103001423 |
| Model Schmersal | AZM300B-ST-1P2P-A |
| Coding | Universal coding |
| Coding level according to EN ISO 14119 | Low |
| Working principle | RFID |
| Frequency band RFID | 125 kHz |
| Transmitter output RFID, maximum | -6 dBm |
| Housing material | Glass-fibre, reinforced thermoplastic |
| Duration of risk, maximum | 200 ms |
| Reaction time, switching off safety outputs via actuator, maximum | 100 ms |
| Reaction time, switching off safety outputs via safety inputs, maximum | 1.5 ms |
| Gross weight | 600 g |
| Power to lock | Yes |
| Actuator monitored | Yes |
| Latching | Yes |
| Manual release | Yes |
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Series-wiring | Yes |
| Safety functions | Yes |
| Integral system diagnostics, status | Yes |
| Number of actuating directions | 3 |
| Number of fail-safe digital outputs | 2 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 5.20 x 10−10 /h |
| PFD value | 4.50 x 10−5 |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Angular misalignment between solenoid interlock and actuator, maximum | 2 ° |
| Holding force FZh in accordance with EN ISO 14119 | 1,150 N |
| Holding force Fmax, maximum | 1,500 N |
| Latching force, adjustable, position 1 | 25 N |
| Latching force, adjustable, position 2 | 50 N |
| Type of the fixing screws | 2x M6 |
| Tightening torque of the fixing screws, minimum | 6 Nm |
| Tightening torque of the fixing screws, maximum | 7 Nm |
| Switch distance, typical | 2 mm |
| Assured switching distance "ON" Sao | 1 mm |
| Assured switching distance "OFF" Sar | 20 mm |
| Note (switching distance) | All switching distances in accordance EN IEC 60947-5-3 |
| Length of sensor chain, maximum | 200 m |
| Note (length of the sensor chain) | Cable length and cross-section change the voltage drop dependiing on the output current |
| Note (series-wiring) | Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD |
| Termination | Connector M12, 8-pole, A-coded |
| Length of sensor | 120 mm |
| Width of sensor | 87.5 mm |
| Height of sensor | 35 mm |
| IP Degree of protection | IP66 IP67 IP69 |
| Ambient temperature | +0 ... +60 °C |
| Storage and transport temperature | -10 ... +90 °C |
| Relative humidity, maximum | 93 % |
| Note (Relative humidity) | non-condensing non-icing |
| Resistance to vibrations | 10 ... 150 Hz, amplitude 0.35 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection class | III |
| Permissible installation altitude above sea level, maximum | 3,000 m |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Operating voltage | 24 VDC -15 % / +10 % (stabilised PELV power supply) |
| No-load supply current I0, typical | 100 mA |
| Current consumption with magnet ON, average | 200 mA |
| Current consumption with magnet ON, peak | 350 mA / 200 ms |
| Rated operating voltage | 24 VDC |
| Operating current | 800 mA |
| Required rated short-circuit current | 100 A |
| External wire and device fuse rating | 2 A gG |
| Electrical fuse rating, maximum | 2 A |
| Time to readiness, maximum | 5,000 ms |
| Switching frequency, maximum | 0.5 Hz |
| Designation, Magnet control | IN |
| Switching thresholds | -3 V ... 5 V (Low) 15 V ... 30 V (High) | −3 V ... 5 V (Low) 15 V ... 30 V (High) |
| Current consumption at 24 V | 10 mA | 5 mA |
| Magnet switch-on time | 100 % |
| Test pulse duration, maximum | 5 ms | 1 ms | 0.5 ms |
| Test pulse interval, minimum | 40 ms | 100 ms |
| Classification ZVEI CB24I, Sink | C0 | C1 | C1 C2 |
| Classification ZVEI CB24I, Source | C1 C2 C3 | C1 C2 C3 | C2 |
| Designation, Safety inputs | X1 and X2 |
| Designation, Safety outputs | Y1 and Y2 |
| Design of control elements | short-circuit proof, p-type | short-circuit proof, p-type |
| Voltage drop Ud, maximum | 2 V | 2 V |
| Leakage current Ir, maximum | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC | 24 VDC |
| Current, Utilisation category DC-12 | 0.25 A | 0.05 A |
| Voltage, Utilisation category DC-13 | 24 VDC | 24 VDC |
| Current, Utilisation category DC-13 | 0.25 A | 0.05 A |
| Test pulse interval, typical | 1,000 ms |
| Designation, Diagnostic outputs | OUT |
| Note (LED switching conditions display) | Error / functional defect: LED red Operating condition: LED green Supply voltage UB: LED green |
| PIN 1 | A1 Supply voltage UB |
| PIN 2 | X1 Safety input 1 |
| PIN 3 | A2 GND |
| PIN 4 | Y1 Safety output 1 |
| PIN 5 | OUT Diagnostic output |
| PIN 6 | X2 Safety input 2 |
| PIN 7 | Y2 Safety output 2 |
| PIN 8 | IN Solenoid control |
| Recommendation (actuator) | AZ/AZM300-B1 |
| Note (General) | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. For doors that are flush with the door frame, the optional mounting plate MP-AZ/AZM300-1 can be used. For glass and Makrolon doors, the optional mounting kit MS-AZ/AZM300-B1-1 can be used. |
품목 코드: 131150435
품목 코드: 151180590
품목 코드: 103040784
품목 코드: 101133843
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
