Chưa cập nhật
รหัสสินค้า: 3RA2816-0EW20
- หน่วย
- Chưa cập nhật
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Module ngõ vào số SIEMENS 6ES7131-6BH01-0BA0. General information / Tên kiểu sản phẩm: DI 16x24VDC ST; General information / HW functional status: From FS02; General information / Firmware version: V0.0.
รหัสสินค้า
6ES7131-6BH01-0BA0
หน่วย
Cái
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Cái)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | 6ES7131-6BH01-0BA0 |
| Tên gọi chính hãng | SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour Code CC00, input delay time 0,05..20ms, diagnostics wire break, diagnostics supply voltage |
| General information / Tên kiểu sản phẩm | DI 16x24VDC ST |
| General information / HW functional status | From FS02 |
| General information / Firmware version | V0.0 |
| General information / FW update possible | No |
| General information / usable BaseUnits | BU type A0 |
| General information / Color code for module-specific color-coded label | CC00 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Product function / suitable for operation on PROFINET R1 IMs | Yes |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V14 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.5 SP3 |
| General information / Engineering with / PCS 7 configurable/integrated from version | V8.1 SP1 |
| General information / Engineering with / PCS neo can be configured/integrated from version | from V1.0.0 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.3 |
| General information / Operating mode / DI | Yes |
| General information / Operating mode / Counter | No |
| General information / Operating mode / Oversampling | No |
| General information / Operating mode / MSI | No |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Input current / Current consumption, max. | 90 mA |
| Encoder supply / 24 V encoder supply / 24 V | No |
| Power loss / Power loss, typ. | 1.7 W |
| Address space per module / Inputs | 2 byte; + 2 bytes for QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | Type A |
| Hardware configuration / Selection of BaseUnit for connection variants / 1-wire connection | BU type A0 |
| Hardware configuration / Selection of BaseUnit for connection variants / 2-wire connection | BU type A0 + Potential distributor module |
| Hardware configuration / Selection of BaseUnit for connection variants / 3-wire connection | BU type A0 + Potential distributor module |
| Hardware configuration / Selection of BaseUnit for connection variants / 4-wire connection | BU type A0 + Potential distributor module |
| Digital inputs / Số ngõ vào số | 16 |
| Digital inputs / Digital inputs, parameterizable | Yes |
| Digital inputs / Sourcing/sinking input | P-reading |
| Digital inputs / Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital inputs / Input voltage / Rated value (DC) | 24 V |
| Digital inputs / Input voltage / for signal "0" | -30 to +5 V |
| Digital inputs / Input voltage / for signal "1" | +11 to +30V |
| Digital inputs / Input current / for signal "1", typ. | 2.5 mA |
| Input delay (for rated value of input voltage) / for standard inputs / parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 μs, depending on line length) |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", min. | 0.05 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max. | 20 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", min. | 0.05 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", max. | 20 ms |
| Digital inputs / Cable length / shielded, max. | 1 000 m |
| Digital inputs / Cable length / unshielded, max. | 600 m |
| Encoder / Connectable encoders / 2-wire sensor | Yes |
| Encoder / Connectable encoders / permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Diagnostic information readable | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Parameterizable | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring of encoder power supply | No |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | No |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| between the channels and the power supply of the electronics | No |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | -30 °C; < 0 °C as of FS02 |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | -30 °C; < 0 °C as of FS02 |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 50 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Ambient conditions / Absolute humidity / dew point, min. | -60 °C; suitable for dry room applications |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 73 mm |
| Dimensions / Chiều sâu | 58 mm |
| Weights / Khối lượng xấp xỉ | 28 g |
รหัสสินค้า: 3RA2816-0EW20
รหัสสินค้า: 3RT2035-1NB30
รหัสสินค้า: DI810
รหัสสินค้า: Q64AD
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
Phân biệt ren G, R, NPT theo hình dạng, tài liệu và cơ chế làm kín. Có ảnh minh họa, quy trình nhận diện và checklist đặt đầu nối.
