Đo áp suất
รหัสสินค้า: QPL25.050
- หน่วย
- Cái
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Module giao tiếp SIEMENS 6ES7153-1AA03-0XB0. General information / Tên kiểu sản phẩm: IM 153-1 DP ST; General information / Vendor identification (VendorID): 801Dh; Supply voltage / Rated value (DC): 24 V.
รหัสสินค้า
6ES7153-1AA03-0XB0
หน่วย
Chưa cập nhật
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Chưa cập nhật)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | 6ES7153-1AA03-0XB0 |
| Tên gọi chính hãng | *** spare part *** SIMATIC DP, connection IM 153-1, for ET 200M, for max. 8 S7-300 modules |
| General information / Tên kiểu sản phẩm | IM 153-1 DP ST |
| General information / Vendor identification (VendorID) | 801Dh |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 20.4 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / external protection for power supply lines (recommendation) | not necessary |
| Supply voltage / Mains buffering / Mains/voltage failure stored energy time | 5 ms |
| Input current / Current consumption, max. | 350 mA; At 24 V DC |
| Input current / Inrush current, typ. | 2.5 A |
| Input current / I²t | 0.1 A²·s |
| Output voltage / Rated value (DC) | 5 V |
| Output current / for backplane bus (5 V DC), max. | 1 A |
| Power loss / Power loss, typ. | 3 W |
| Address area / Address space per module / Inputs | 128 byte |
| Address area / Address space per module / Outputs | 128 byte |
| Hardware configuration / number of modules per DP device interface, max. | 8 |
| Interfaces / Transmission procedure | RS 485 |
| Interfaces / Transmission rate, max. | 12 Mbit/s |
| 1. Interface / automatic detection of transmission rate | Yes |
| 1. Interface / Interface types / Output current of the interface, max. | 90 mA |
| 1. Interface / Interface types / Design of the connection | 9-pin sub D socket |
| 1. Interface / PROFIBUS DP device / GSD file | (for DPV1) SIEM801D.GSD; SI01801D.GSG |
| 1. Interface / PROFIBUS DP device / automatic baud rate search | Yes |
| Protocols / Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 |
| Protocols / Protocols (Ethernet) / TCP/IP | No |
| Protocols / PROFIBUS DP / Number of node addresses, max. | 1 to 125 permitted |
| PROFIBUS DP / Services / SYNC capability | Yes |
| PROFIBUS DP / Services / FREEZE capability | Yes |
| PROFIBUS DP / Services / Direct data exchange (slave-to-slave communication) | Yes; Sender |
| Potential separation / Potential separation exists | Yes |
| Isolation / Isolation tested with | Isolation voltage 500 V |
| Degree and class of protection / IP degree of protection | IP20 |
| Ambient conditions / Ambient temperature during operation / min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 40 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 3 000 m |
| Configuration / Configuration software / STEP 7 | STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file |
| Dimensions / Chiều rộng | 40 mm |
| Dimensions / Chiều cao | 125 mm |
| Dimensions / Chiều sâu | 117 mm |
| Weights / Khối lượng xấp xỉ | 360 g |
รหัสสินค้า: QPL25.050
รหัสสินค้า: QPL25.500B
รหัสสินค้า: SQM45.295B9
รหัสสินค้า: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
