Aptomat & Circuit Breaker
รหัสสินค้า: A9F74206
- หน่วย
- Cái
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Biến tần Schneider ATV71HD15N4Z. TESFA hỗ trợ đối chiếu mã, thông số điện và báo giá cho nhu cầu MRO công nghiệp.
รหัสสินค้า
ATV71HD15N4Z
หน่วย
Cái
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Cái)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã hàng | ATV71HD15N4Z |
| Range of product | Altivar 71 |
| Hãng sản xuất | Schneider Electric |
| Product or component type | Variable speed drive |
| Nhóm sản phẩm | Biến tần |
| Product specific application | Complex, high-power machines |
| Component name | ATV71 |
| Danh mục | Biến tần |
| Model / mã đặt hàng | ATV71HD15N4Z |
| Motor power kW | 15 kW, 3 phases at 380...480 V |
| Chức năng | Điều khiển tốc độ động cơ |
| Motor power hp | 20 hp, 3 phases at 380...480 V |
| Maximum motor cable length | 50 m shielded cable<br />100 m unshielded cable |
| Ứng dụng | Tủ điện, hệ thống phân phối điện, tự động hóa và MRO nhà máy |
| Đối chiếu trước khi mua | Kiểm tra mã đặt hàng, dòng/áp, số cực, option và ảnh nhãn thiết bị đang dùng |
| power supply voltage | 380...480 V - 15...10 % |
| Network number of phases | 3 phases |
| Nguồn dữ liệu | CRM TESFA; ảnh theo mã/series/nhóm Schneider để hỗ trợ nhận diện ban đầu |
| Line current | 39 A for 480 V 3 phases 15 kW / 20 hp<br />48 A for 380 V 3 phases 15 kW / 20 hp |
| EMC filter | Integrated |
| Assembly style | With heat sink |
| Variant | Without remote graphic terminal |
| Apparent power | 31.6 kVA at 380 V 3 phases 15 kW / 20 hp |
| Prospective line Isc | 22 kA for 3 phases |
| Nominal output current | 27 A at 4 kHz 460 V 3 phases 15 kW / 20 hp<br />33 A at 4 kHz 380 V 3 phases 15 kW / 20 hp |
| Maximum transient current | 49.5 A for 60 s 3 phases 15 kW / 20 hp<br />54.5 A for 2 s 3 phases 15 kW / 20 hp |
| Output frequency | 0.1…599 Hz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 1...16 kHz adjustable<br />4...16 kHz with derating factor |
| Asynchronous motor control profile | Voltage/frequency ratio (2 or 5 points)<br />ENA (Energy adaptation) system for unbalanced loads<br />Sensorless flux vector control (SFVC) (voltage or current vector)<br />Flux vector control (FVC) with sensor (current vector) |
| Type of polarization | No impedance for Modbus |
| Product destination | Asynchronous motors<br />Synchronous motors |
| power supply voltage limits | 323…528 V |
| power supply frequency | 50...60 Hz - 5...5 % |
| power supply frequency limits | 47.5...63 Hz |
| Speed range | 1…100 for asynchronous motor in open-loop mode, without speed feedback<br />1…1000 for asynchronous motor in closed-loop mode with encoder feedback<br />1…50 for synchronous motor in open-loop mode, without speed feedback |
| Speed accuracy | +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn<br />+/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn |
| Torque accuracy | +/- 15 % in open-loop mode, without speed feedback<br />+/- 5 % in closed-loop mode with encoder feedback |
| Transient overtorque | 170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes<br />220 % of nominal motor torque +/- 10 % for 2 s |
| Braking torque | <= 150 % with braking or hoist resistor<br />30 % without braking resistor |
| Synchronous motor control profile | Vector control without speed feedback |
| Regulation loop | Adjustable PI regulator |
| Motor slip compensation | Adjustable<br />Not available in voltage/frequency ratio (2 or 5 points)<br />Automatic whatever the load<br />Suppressable |
| diagnostic | 1 LED (red) for drive voltage |
| Output voltage | <= power supply voltage |
| Insulation | Electrical between power and control |
| type of cable for mounting in an enclosure | With a NEMA Type1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC<br />With an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC<br />Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC<br />Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR |
| Electrical connection | Terminal, clamping capacity: 2.5 mm², 14 AWG (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)<br />Terminal, clamping capacity: 35 mm², 2 AWG (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB) |
| Tightening torque | 0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)<br />5.4 N.m, 47.7 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB) |
| Supply | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection<br />Internal supply: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection |
| Analogue input number | 2 |
| Analogue input type | AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign<br />AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits<br />AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits |
| input sampling time | 2 ms +/- 0.5 ms (AI1-/Al1+) - analog input(s)<br />2 ms +/- 0.5 ms (Al2) - analog input(s)<br />2 ms +/- 0.5 ms (LI1...LI5) - discrete input(s)<br />2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input(s) |
| Response time | <= 100 ms in STO (Safe Torque Off)<br />AO1 2 ms, tolerance +/- 0.5 ms for analog output(s)<br />R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s)<br />R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s) |
| absolute accuracy precision | +/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C<br />+/- 0.6 % (AI2) for a temperature variation 60 °C<br />+/- 1 % (AO1) for a temperature variation 60 °C |
| Linearity error | +/- 0.15 % of maximum value (AI1-/Al1+, AI2)<br />+/- 0.2 % (AO1) |
| Analogue output number | 1 |
| Analogue output type | AO1 software-configurable logic output 10 V 20 mA<br />AO1 software-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits<br />AO1 software-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits |
| Discrete output number | 2 |
| Discrete output type | Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles<br />Configurable relay logic: (R2A, R2B) NO - 100000 cycles |
| Minimum switching current | 3 mA at 24 V DC for configurable relay logic |
| Maximum switching current | R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4<br />R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4<br />R1, R2: 5 A at 250 V AC resistive load, cos phi = 1<br />R1, R2: 5 A at 30 V DC resistive load, cos phi = 1 |
| Discrete input number | 7 |
| Discrete input type | LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm<br />LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm<br />LI6: switch-configurable PTC probe 0…6, impedance: 1500 Ohm<br />PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d |
| Discrete input logic | Negative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1)<br />Positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1)<br />Negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1)<br />Positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1) |
| Acceleration and deceleration ramps | S, U or customized<br />Linear adjustable separately from 0.01 to 9000 s<br />Automatic adaptation of ramp if braking capacity exceeded, by using resistor |
| Braking to standstill | By DC injection |
| Protection type | Against exceeding limit speed: drive<br />Against input phase loss: drive<br />Break on the control circuit: drive<br />Input phase breaks: drive<br />Line supply overvoltage: drive<br />Line supply undervoltage: drive<br />Overcurrent between output phases and earth: drive<br />Overheating protection: drive<br />Overvoltages on the DC bus: drive<br />Short-circuit between motor phases: drive<br />Thermal protection: drive<br />Motor phase break: motor<br />Power removal: motor<br />Thermal protection: motor |
| Insulation resistance | > 1 mOhm 500 V DC for 1 minute to earth |
รหัสสินค้า: A9F74206
รหัสสินค้า: 29376
รหัสสินค้า: A9F18216
รหัสสินค้า: A9F18316
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
