Nút nhấn & Switch
รหัสสินค้า: XB5AA31
- หน่วย
- Cái
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Thiết bị điện công nghiệp Schneider BMXDDI3202K. TESFA hỗ trợ đối chiếu mã, thông số điện và báo giá cho nhu cầu MRO công nghiệp.
รหัสสินค้า
BMXDDI3202K
หน่วย
Cái
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Cái)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã hàng | BMXDDI3202K |
| Range of product | Modicon X80 |
| Hãng sản xuất | Schneider Electric |
| Product or component type | Discrete input module |
| Discrete input number | 32 |
| Nhóm sản phẩm | Thiết bị điện công nghiệp |
| Discrete input voltage | 24 V DC for isolated |
| Model / mã đặt hàng | BMXDDI3202K |
| Discrete input logic | Positive logic (sink) |
| Ứng dụng | Tủ điện, hệ thống phân phối điện, tự động hóa và MRO nhà máy |
| Discrete input number | 32 isolated conforming to IEC 60947-5-2 at 24 V DC<br />32 isolated conforming to IEC 61131-2 type 3 at 24 V DC |
| Đối chiếu trước khi mua | Kiểm tra mã đặt hàng, dòng/áp, số cực, option và ảnh nhãn thiết bị đang dùng |
| Input wiring mode | 2 or 3 wires |
| Nguồn dữ liệu | CRM TESFA; ảnh theo mã/series/nhóm Schneider để hỗ trợ nhận diện ban đầu |
| Discrete input current | 2.5 mA at 24 V DC |
| Voltage state 1 guaranteed | >= 11 V |
| Voltage state 0 guaranteed | < 5 V |
| Current state 1 guaranteed | >= 2 mA |
| Current state 0 guaranteed | <= 0.5 mA |
| Input impedance | 9600 Ohm |
| Paralleling of inputs | No |
| Insulation resistance | > 10 MOhm 500 V DC |
| DC typical response time | 4 ms |
| DC maximum response time | 7 ms |
| Sensor power supply | : 19…30 V |
| Typical current consumption | 121 mA DC |
| Current consumption | 160 mA at 3.3 V DC |
| Power dissipation in W | 3.9 W |
| Isolation between channels and bus | 1500 V for 1 minute |
| Hot swapping fallback | Yes |
| MTBF reliability | 905000 H |
| Voltage detection threshold | < 14 V DC sensor fault<br />> 18 V DC sensor OK |
| Local signalling | 1 LED (green) for module operating (RUN)<br />1 LED per channel (green) for channel diagnostic<br />1 LED (red) for module error (ERR)<br />1 LED (red) for module I/O |
| Height | 134.6 mm |
| Width | 32 mm |
| Depth | 86 mm |
| Net weight | 0.112 kg |
| IP degree of protection | IP20 |
| Protective treatment | Standard version |
| Marking | CE<br />UKCA<br />CULus<br />RCM<br />EAC |
| Directives | 2014/35/EU - low voltage directive<br />2014/30/EU - electromagnetic compatibility |
| Dielectric strength | 1500 V AC at 50/60 Hz 1 minute, primary/secondary<br />500 V DC 1 minute, between group of channels |
| Ambient air temperature for operation | 0…60 °C |
| Ambient air temperature for storage | -40…85 °C |
| Relative humidity | 5…95 % at 55 °C without condensation |
| Operating altitude | 0...2000 m<br />2000...5000 m with derating |
| Pollution degree | 2 |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.200 cm |
| Package 1 Width | 11.000 cm |
| Package 1 Length | 11.500 cm |
| Package 1 Weight | 143.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 15 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 2.860 kg |
รหัสสินค้า: XB5AA31
รหัสสินค้า: XB5AA42
รหัสสินค้า: LRD21
รหัสสินค้า: XB5AD33
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
