Chưa cập nhật
รหัสสินค้า: 529187
- หน่วย
- Chưa cập nhật
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Bộ điều chỉnh áp suất tỷ lệ FESTO VPPL-3L-3-G14-0L40H-A4-A-S1-7. Nominal size, supply: 3 mm; Nominal size, exhaust: 3 mm; Kiểu điều khiển: Electrical.
รหัสสินค้า
VPPL-3L-3-G14-0L40H-A4-A-S1-7
หน่วย
Cái
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Cái)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | VPPL-3L-3-G14-0L40H-A4-A-S1-7 |
| Mã vật tư FESTO | 1635983 |
| Nominal size, supply | 3 mm |
| Nominal size, exhaust | 3 mm |
| Kiểu điều khiển | Electrical |
| Sealing principle | Soft |
| Vị trí lắp đặt | Any Preferably upright |
| Design | Directly actuated piston regulator |
| Short circuit current rating | No |
| Max. cable length | 30 M |
| Safety instructions | Safety position VPPL: if the power supply cable is interrupted, the output pressure drops to 0 bar. |
| Reverse polarity protection | For all electrical connections |
| Type of reset | Mechanical spring |
| Type of piloting | Direct |
| Valve function | 3-way proportional-pressure regulator, closed |
| Display type | LED indicator |
| Áp suất làm việc | 5 MPa 50 bar |
| Dải điều chỉnh áp suất | 0.04 MPa...4 MPa 0.4 bar...40 bar |
| Inlet pressure 1 | 0 bar...50 bar 0 MPa...5 MPa |
| Max. pressure hysteresis | 0.04 MPa 0.4 bar 5.8 psi |
| b value | 0.25 |
| C value | 0.8 l/sbar |
| Lưu lượng danh định tiêu chuẩn | 245 l/min |
| Standard nominal flow rate 2-3 | 282 l/min |
| Switching time off | 654 ms |
| Switching time on | 428 ms |
| Operational voltage range DC | 21.6 V...27.6 V |
| Chu kỳ làm việc | 100% |
| Max. electrical power consumption | 26.7 W |
| Residual ripple | 10% |
| Signal range analogue output | 4 - 20 mA |
| Signal range analogue input | 4 - 20 mA |
| SETPOINT/ACTUAL values | Current type 4-20 mA |
| Môi chất làm việc | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation not possible |
| Approval | c UL us - Listed (Oil) |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Media temperature | 5 °C...50 °C |
| Cấp bảo vệ | IP65 |
| Nhiệt độ môi trường | 5 °C...50 °C |
| Storage temperature | -10 °C...60 °C |
| Khối lượng sản phẩm | 1100 g |
| Linearity error in ± %FS | 1 %FS |
| Total accuracy | 1.5 %FS |
| Temperature cooefficient | 0.04 %/K |
| Repetition accuracy in ± %FS | 1 %FS |
| Electrical connection diagnostics interface | Socket, M12, 5-pin, A-coded |
| Electrical connection, IN | Plug connector, M12, 5-pin, A-coded |
| Electrical connection, OUT | Plug connector, M12, 5-pin, A-coded |
| Type of mounting | With through-hole |
| Kết nối khí nén cổng 1 | G1/4 |
| Kết nối khí nén cổng 2 | G1/4 |
| Pneumatic connection, port 3 | G1/4 |
| Note on materials | RoHS compliant |
| Vật liệu thân | Anodised wrought aluminium alloy |
รหัสสินค้า: 529187
รหัสสินค้า: MS6-LFM-A
รหัสสินค้า: MS9-LFM-A
รหัสสินค้า: LFR-D-MAXI-A
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
