Chưa cập nhật
รหัสสินค้า: 529187
- หน่วย
- Chưa cập nhật
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Bộ điều chỉnh áp suất tỷ lệ FESTO VPPM-8L-L-1-G14-0L6H-A4P-S1C1. Nominal size, supply: 8 mm; Nominal size, exhaust: 7 mm; Kiểu điều khiển: Electrical.
รหัสสินค้า
VPPM-8L-L-1-G14-0L6H-A4P-S1C1
หน่วย
Cái
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Cái)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | VPPM-8L-L-1-G14-0L6H-A4P-S1C1 |
| Mã vật tư FESTO | 571301 |
| Nominal size, supply | 8 mm |
| Nominal size, exhaust | 7 mm |
| Kiểu điều khiển | Electrical |
| Sealing principle | Soft |
| Vị trí lắp đặt | Any |
| Design | Piloted diaphragm regulator |
| Short circuit current rating | For all electrical connections |
| Safety instructions | Safety position VPPM: if the power supply cable is interrupted, output pressure is maintained unregulated. |
| Reverse polarity protection | For all electrical connections |
| Type of reset | Mechanical spring |
| Type of piloting | Piloted |
| Valve function | 3-way proportional pressure regulator |
| Display type | Back-lit LCD |
| Dải điều chỉnh áp suất | 0.006 MPa...0.6 MPa 0.06 bar...6 bar |
| Inlet pressure 1 | 0 bar...8 bar 0 MPa...0.8 MPa |
| Max. pressure hysteresis | 0.03 bar |
| Lưu lượng danh định tiêu chuẩn | 1750 l/min |
| Operational voltage range DC | 21.6 V...26.4 V |
| Max. current consumption | 300 mA |
| Chu kỳ làm việc | 100% |
| Max. electrical power consumption | 7 W |
| Residual ripple | 10% |
| Switching output | PNP |
| Signal range analogue output | 4 - 20 mA |
| Accuracy analogue output in ± %FS | 2 %FS |
| Signal range analogue input | 4 - 20 mA |
| Môi chất làm việc | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation not possible |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Media temperature | 10 °C...50 °C |
| Cấp bảo vệ | IP65 |
| Nhiệt độ môi trường | 0 °C...50 °C |
| Khối lượng sản phẩm | 560 g |
| Linearity | 1 %FS |
| Hysteresis | 0.5 %FS |
| Reproducibility | 0.5 %FS |
| Total accuracy | 1.25 %FS |
| Temperature cooefficient | 0.04 %/K |
| Repetition accuracy FS | 0.5 % |
| Kết nối điện | 8-pin M12 Plug |
| Type of mounting | Either: With through-hole With accessories |
| Kết nối khí nén cổng 1 | G1/4 |
| Kết nối khí nén cổng 2 | G1/4 |
| Pneumatic connection, port 3 | G1/4 |
| Note on materials | RoHS compliant |
| Vật liệu thân | Wrought aluminium alloy anodised |
รหัสสินค้า: 529187
รหัสสินค้า: MS6-LFM-A
รหัสสินค้า: MS9-LFM-A
รหัสสินค้า: LFR-D-MAXI-A
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
