Chưa cập nhật
รหัสสินค้า: DBS36E-S3EK02000
- หน่วย
- Chưa cập nhật
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Bộ mã hóa vòng quay SICK DBS36E-S3EK01000. Performance / Pulses per revolution: 1,000; Performance / Measuring step: 90°, electric/pulses per revolution; Performance / Measuring step deviation: ± 18° / pulses per revolution
รหัสสินค้า
DBS36E-S3EK01000
หน่วย
Chưa cập nhật
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Chưa cập nhật)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | DBS36E-S3EK01000 |
| Mã đặt hàng của hãng | 1060544 |
| Performance / Pulses per revolution | 1,000 |
| Performance / Measuring step | 90°, electric/pulses per revolution |
| Performance / Measuring step deviation | ± 18° / pulses per revolution |
| Performance / Error limits | ± 54° / pulses per revolution |
| Performance / Duty cycle | ≤ 0.5 ± 5 % |
| Interfaces / Communication interface | Incremental |
| Interfaces / Communication Interface detail | HTL / Push-Pull |
| Interfaces / Number of signal channels | 6-channel |
| Interfaces / Initialization time | < 3 ms |
| Interfaces / Output frequency | ≤ 300 kHz |
| Interfaces / Load current | ≤ 30 mA |
| Interfaces / Power consumption | ≤ 0.5 W (without load) |
| Electronics / Connection type | Cable, 8-wire, universal, 1.5 m |
| Electronics / Supply voltage | 7 ... 30 V |
| Electronics / Reference signal, number | 1 |
| Electronics / Reference signal, position | 90°, electric, logically gated with A and B |
| Electronics / Reverse polarity protection | ✔ |
| Electronics / Short-circuit protection of the outputs | ✔ 1) |
| Electronics / Chú thích từ hãng | 1) The short-circuit rating is only given if Us and GND are connected correctly.; |
| Mechanics / Mechanical design | Solid shaft, face mount flange |
| Mechanics / Shaft diameter | 6 mm; With flat |
| Mechanics / Shaft length | 12 mm |
| Mechanics / Weight | + 150 g (with connecting cable) |
| Mechanics / Shaft material | Stainless steel |
| Mechanics / Flange material | Aluminum |
| Mechanics / Housing material | Aluminum |
| Mechanics / Material, cable | PVC |
| Mechanics / Start up torque | + 0.5 Ncm (+20 °C) |
| Mechanics / Operating torque | 0.4 Ncm (+20 °C) |
| Mechanics / Permissible shaft loading | 40 N (radial) 1) ; 20 N (axial); |
| Mechanics / Operating speed | 6,000 min⁻¹ 2) |
| Mechanics / Maximum operating speed | ≤ 8,000 min⁻¹ 3) |
| Mechanics / Moment of inertia of the rotor | 0.6 gcm² |
| Mechanics / Angular acceleration | ≤ 500,000 rad/s² |
| Mechanics / Chú thích từ hãng | 1) Higher values are possible using limited bearing life.; 2) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.; 3) No permanent operation. Decreasing signal quality.; |
| Ambient data / EMC | According to EN 61000-6-2 and EN 61000-6-3 (class A) |
| Ambient data / Enclosure rating | IP65 |
| Ambient data / Permissible relative humidity | 90 % (Condensation not permitted) |
| Ambient data / Operating temperature range | –20 °C ... +85 °C, –35 °C ... +95 °C on request |
| Ambient data / Storage temperature range | –40 °C ... +100 °C, without package |
| Ambient data / Resistance to shocks | 100 g, 6 ms (EN 60068-2-27) |
| Ambient data / Resistance to vibration | 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
รหัสสินค้า: DBS36E-S3EK02000
รหัสสินค้า: IMA18-10BE1ZC0K
รหัสสินค้า: WTE280-2P4331
รหัสสินค้า: DBS36E-S3EJ02000
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
