Chưa cập nhật
รหัสสินค้า: DBS36E-S3EK02000
- หน่วย
- Chưa cập nhật
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Cảm biến tương phản SICK KTX-WP91141252ZZZZ. Features / Parameter presettings: None; Features / Special applications: Standard; Features / Device type: Standard
รหัสสินค้า
KTX-WP91141252ZZZZ
หน่วย
Chưa cập nhật
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Chưa cập nhật)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | KTX-WP91141252ZZZZ |
| Mã đặt hàng của hãng | 1078097 |
| Features / Parameter presettings | None |
| Features / Special applications | Standard |
| Features / Device type | Standard |
| Features / Housing design | Large |
| Features / Dimensions (W x H x D) | 30 mm x 53 mm x 78.5 mm |
| Features / Light source | LED, RGB 1) |
| Features / TwinEye technology | ✔ |
| Features / Light emission | Long side of housing |
| Features / Light spot size | 0.9 mm x 3.8 mm |
| Features / Light spot direction | Vertical 2) |
| Features / Receiving filters | None |
| Features / Wave length | 470 nm, 525 nm, 625 nm |
| Features / Sensing distance | ≤ 13 mm |
| Features / Sensing distance tolerance | ± 5 mm |
| Features / Teach-in mode | 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode |
| Features / Output function | Light/dark switching |
| Features / Delay time | Adjustable |
| Features / Setting the key lock | Standard |
| Features / Delivery status | 2-point teach-in |
| Features / Chú thích từ hãng | 1) Average service life: 100,000 h at T U = +25 °C.; 2) In relation to long side of housing.; |
| Electronics / Supply voltage | 10.8 V DC ... 28.8 V DC 1) |
| Electronics / Ripple | ≤ 5 V pp 2) |
| Electronics / Current consumption | 3) |
| Electronics / Switching frequency | 50 kHz 4) ; 5) ; |
| Electronics / Response time | 10 µs |
| Electronics / Jitter | 5 µs 6) |
| Electronics / Switching output | PNP |
| Electronics / Switching output (voltage) | PNP: HIGH = V S - 3 V / LOW = 0 V |
| Electronics / Output current I max. | 100 mA 7) |
| Electronics / Input, teach-in (ET) | Teach: U = 10 V ... S |
| Electronics / Input, blanking input (AT) | Blanked: U = 10 V ... < Uv |
| Electronics / Input, fine/coarse (F/C) | Coarse: U = 10 V ... < Uv |
| Electronics / Input, light/dark (L/D) | Light: U = 10 V ... < Uv |
| Electronics / Retention time (ET) | 25 ms, non-volatile memory |
| Electronics / Time delay | None |
| Electronics / Protection class | III |
| Electronics / Circuit protection | U V connections, reverse polarity protected; Output Q short-circuit protected; Interference pulse suppression; |
| Electronics / Chú thích từ hãng | 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.; 2) May not fall below or exceed U V tolerances.; 3) Without load.; 4) With light/dark ratio 1:1.; 5) 1-point teach-in (color mode): 16 kHz.; 6) 1-point teach-in (color mode): 15 µs.; 7) Total current of all Outputs.; |
| Mechanics / Housing material | VISTAL® |
| Mechanics / Optics material | COP |
| Mechanics / Weight | 94 g |
| Ambient data / Ambient operating temperature | –20 °C ... +60 °C |
| Ambient data / Ambient temperature, storage | –25 °C ... +75 °C |
| Ambient data / Shock load | According to IEC 60068-2-27 (30 g/11 ms) |
| Ambient data / Enclosure rating | IP67 |
| Ambient data / UL File No. | E181493 |
รหัสสินค้า: DBS36E-S3EK02000
รหัสสินค้า: IMA18-10BE1ZC0K
รหัสสินค้า: WTE280-2P4331
รหัสสินค้า: DBS36E-S3EJ02000
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
