Đo áp suất
รหัสสินค้า: QPL25.050
- หน่วย
- Cái
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Module ngõ vào số SIEMENS 6ES7131-4BD01-0AA0. Supply voltage / Rated value (DC): 24 V; From power module; Supply voltage / Reverse polarity protection: Yes; Input current / from supply voltage L+, max.: Dependent on encoder.
รหัสสินค้า
6ES7131-4BD01-0AA0
หน่วย
Chưa cập nhật
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Chưa cập nhật)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | 6ES7131-4BD01-0AA0 |
| Tên gọi chính hãng | *** Spare part *** SIMATIC DP, 5 electronic modules for ET 200S, 4DI standard 24 V DC, 15 mm width, 5 units per packing unit |
| Supply voltage / Rated value (DC) | 24 V; From power module |
| Supply voltage / Reverse polarity protection | Yes |
| Input current / from supply voltage L+, max. | Dependent on encoder |
| Input current / from backplane bus 3.3 V DC, max. | 10 mA |
| Encoder supply / Type of output voltage | min. L+ (-0.5 V), under load |
| Encoder supply / Output current / Giá trị định mức | 500 mA |
| Encoder supply / Output current / permissible range, lower limit | 0 mA |
| Encoder supply / Output current / permissible range, upper limit | 500 mA |
| Power loss / Power loss, typ. | 0.7 W |
| Address area / Address space per module / Address space per module, max. | 1 byte |
| Address area / Address space per module / with packing | 4 bit |
| Digital inputs / Số ngõ vào số | 4 |
| Digital inputs / Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| Digital inputs / Input voltage / Type of input voltage | DC |
| Digital inputs / Input voltage / Rated value (DC) | 24 V |
| Digital inputs / Input voltage / for signal "0" | -30 to +5 V |
| Digital inputs / Input voltage / for signal "1" | +15 to +30 V |
| Digital inputs / Input current / for signal "1", typ. | 7 mA; at 24 V |
| Input delay (for rated value of input voltage) / for standard inputs / parameterizable | No |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", min. | 2 ms; typically 3 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max. | 4.5 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", min. | 2 ms; typically 3 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", max. | 4.5 ms |
| Digital inputs / Cable length / shielded, max. | 1 000 m |
| Digital inputs / Cable length / unshielded, max. | 600 m |
| Connectable encoders / 2-wire sensor | Yes |
| Connectable encoders / permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Interrupts/diagnostics/status information / Diagnostics function | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Group error SF (red) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator digital input (green) | Yes; per channel |
| Potential separation / Potential separation digital inputs / between the channels | No |
| Potential separation / Potential separation digital inputs / between the channels and backplane bus | Yes |
| Isolation / Isolation tested with | 500 V DC |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 81 mm |
| Dimensions / Chiều sâu | 52 mm |
| Weights / Khối lượng xấp xỉ | 35 g |
รหัสสินค้า: QPL25.050
รหัสสินค้า: QPL25.500B
รหัสสินค้า: SQM45.295B9
รหัสสินค้า: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
