Đo áp suất
รหัสสินค้า: QPL25.050
- หน่วย
- Cái
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Module ngõ vào tương tự SIEMENS 6ES7134-4JB51-0AB0. General information / Product function / Isochronous mode: No; Supply voltage / Load voltage L+ / Rated value (DC): 24 V; From power module; Supply voltage / Load voltage L+ / Reverse polarity protection: Yes.
รหัสสินค้า
6ES7134-4JB51-0AB0
หน่วย
Chưa cập nhật
สถานะการจัดหา
ติดต่อเพื่อขอราคา
จำนวนที่ต้องการ (Chưa cập nhật)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | 6ES7134-4JB51-0AB0 |
| Tên gọi chính hãng | *** Spare part *** SIMATIC DP, Electronics module for ET 200S, 2/4 AI RTD Standard, 15 mm width, 15 bit+sign Pt100 STD; Pt100 KL; NI100 STD; NI100 KL; 150 ohm; 300 ohm; 600 ohm; Cycle time 110 ms/channel with SF LED (group fault) |
| General information / Product function / Isochronous mode | No |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V; From power module |
| Supply voltage / Load voltage L+ / Reverse polarity protection | Yes |
| Input current / from load voltage L+ (without load), max. | 30 mA |
| Input current / from backplane bus 3.3 V DC, max. | 10 mA |
| Output voltage / Power supply to the transmitters / present | Yes |
| Output voltage / Power supply to the transmitters / short-circuit proof | Yes |
| Power loss / Power loss, typ. | 0.6 W |
| Address area / Address space per module / Address space per module, max. | 8 byte |
| Analog inputs / Số ngõ vào tương tự | 4; 2 for 3 or 4-wire connection |
| Analog inputs / permissible input voltage for voltage input (destruction limit), max. | 9 V |
| Analog inputs / Constant measurement current for resistance-type transmitter, typ. | 1.67 mA |
| Analog inputs / Cycle time (all channels) max. | Number of active channels per module x basic conversion time |
| Analog inputs / Technical unit for temperature measurement adjustable | No |
| Analog inputs / Input ranges (rated values), resistance thermometer / Ni 100 | Yes; Standard/climate |
| Analog inputs / Input ranges (rated values), resistance thermometer / Input resistance (Ni 100) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistance thermometer / Pt 100 | Yes; Standard/climate |
| Analog inputs / Input ranges (rated values), resistance thermometer / Input resistance (Pt 100) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistors / 0 to 150 ohms | Yes |
| Analog inputs / Input ranges (rated values), resistors / Input resistance (0 to 150 ohms) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistors / 0 to 300 ohms | Yes |
| Analog inputs / Input ranges (rated values), resistors / Input resistance (0 to 300 ohms) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistors / 0 to 600 ohms | Yes |
| Analog inputs / Input ranges (rated values), resistors / Input resistance (0 to 600 ohms) | 2 000 k Ω |
| Characteristic linearization / Parameterizable | Yes; for Pt100, Ni100 |
| Characteristic linearization / for resistance thermometer | Pt100 (standard, climatic range), Ni100 (standard, climatic range) |
| Cable length / shielded, max. | 200 m |
| Analog value generation for the inputs / Measurement principle | integrating |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 16 bit; 150 ohms: 14 bit; 300, 600 ohms: 15 bit, Pt100, Ni100: 16 bit |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizable | Yes |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time (ms) | 16,7 / 20 ms |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Interference voltage suppression for interference frequency f1 in Hz | 50 / 60 Hz |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Conversion time (per channel) | 66 / 80 ms; additional conversion time for diagnostic wire break test |
| Analog value generation for the inputs / Smoothing of measured values / parameterizable | Yes; In four stages by means of digital filtering |
| Analog value generation for the inputs / Smoothing of measured values / Step: None | Yes; 1x cycle time |
| Analog value generation for the inputs / Smoothing of measured values / Step: low | Yes; 4x cycle time |
| Analog value generation for the inputs / Smoothing of measured values / Step: Medium | Yes; 32x cycle time |
| Analog value generation for the inputs / Smoothing of measured values / Step: High | Yes; 64x cycle time |
| Encoder / Connection of signal encoders / for resistance measurement with two-wire connection | Yes |
| Encoder / Connection of signal encoders / for resistance measurement with three-wire connection | Yes |
| Encoder / Connection of signal encoders / for resistance measurement with four-wire connection | Yes |
| Errors/accuracies / Operational error limit in overall temperature range / Resistance thermometer, relative to input range, (+/-) | 0.6 % |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Resistance thermometer, relative to input range, (+/-) | 0.4 % |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Group error SF (red) | Yes |
| Potential separation / Potential separation analog inputs / between the channels | No |
| Potential separation / Potential separation analog inputs / between the channels and backplane bus | Yes |
| Potential separation / Potential separation analog inputs / Between the channels and load voltage L+ | Yes |
| Isolation / Isolation tested with | 500 V DC |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 81 mm |
| Dimensions / Chiều sâu | 52 mm |
| Weights / Khối lượng xấp xỉ | 40 g |
รหัสสินค้า: QPL25.050
รหัสสินค้า: QPL25.500B
รหัสสินค้า: SQM45.295B9
รหัสสินค้า: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
