Van khí
รหัสสินค้า: MSFG-24-EX
- หน่วย
- Cái
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Ống khí nén Festo PUN-H-16X2,5-BL, article 197388. Ảnh và thông số được xác minh từ datasheet chính hãng Festo cho đúng full SKU.
รหัสสินค้า
PUN-H-16X2,5-BL
หน่วย
Mét
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Mét)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã đặt hàng | PUN-H-16X2,5-BL |
| Mã article Festo | 197388 |
| Đường kính ngoài | 16 mm |
| Đường kính trong | 11 mm |
| Áp suất làm việc toàn dải nhiệt độ | -0.095 MPa...0.6 MPa -0.95 bar...6 bar -13.775 psi...87 psi |
| Áp suất làm việc theo nhiệt độ | -0.095 MPa...1 MPa -0.95 bar...10 bar -13.775 psi...145 psi |
| Điều kiện áp suất làm việc | Với nước: áp suất phụ thuộc nhiệt độ theo biểu đồ hãng; tối đa 0,3 MPa ở 0–60 °C |
| Bán kính uốn nhỏ nhất | 38 mm |
| Môi chất làm việc | Khí nén theo ISO 8573-1:2010 [7:-:-]; nước lỏng, không đóng băng |
| Tuân thủ LABS (PWIS) | VDMA24364-B2-L |
| Nhiệt độ môi trường | -35 °C...60 °C |
| Kết nối khí nén | Dùng đầu nối nhanh cho ống đường kính ngoài 16 mm |
| Màu sắc | Xanh dương |
| Độ cứng Shore | D 52 +/-3 |
| Thông tin vật liệu | Tuân thủ RoHS |
| Vật liệu ống | TPE-U(PU) |
| Mã đặt hàng | PUN-H-16X2,5-BL |
| Mã article Festo | 197388 |
| Outside diameter | 16 mm |
| Flow-relevant bending radius | 88 mm |
| Inside diameter | 11 mm |
| Min. bending radius | 38 mm |
| Instructions on use | TPE-U, ether-based |
| Tubing characteristics | Suitable for energy chains |
| Operating pressure complete temperature range | -0.095 MPa...0.6 MPa -0.95 bar...6 bar -13.775 psi...87 psi |
| Temperature-dependent operating pressure | -0.095 MPa...1 MPa -0.95 bar...10 bar -13.775 psi...145 psi |
| Note on operating pressure | Water: temperature-dependent operating pressure, see diagram, max. 0.3 MPa at 0–60 °C |
| Approval | German Technical Control Board (TÜV) |
| Certiflcate issuing authority | B 013277 0527 00 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Fire test material | UL94 HB |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according to ISO 14644-1 |
| Suitable for use with food | See supplementary material information |
| Ambient temperature | -35 °C...60 °C |
| Product weight according to length | 0.123 kg/m |
| Pneumatic connection | For push-in connector O.D. 16 mm |
รหัสสินค้า: MSFG-24-EX
รหัสสินค้า: DNC-100-PPVA
รหัสสินค้า: VZBA-2"-GG-63-T-22-F0507-V4V4T
รหัสสินค้า: DGC-18-450-KF-PPV-A
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
