Van khí
รหัสสินค้า: MSFG-24-EX
- หน่วย
- Cái
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Van điện từ khí nén FESTO MHE3-MS1H-3/2G-1/8. Valve function: 3/2-way, single solenoid, closed; Kiểu điều khiển: Electrical; Chiều rộng kết cấu: 14 mm.
รหัสสินค้า
MHE3-MS1H-3/2G-1/8
หน่วย
Chưa cập nhật
สถานะการจัดหา
Liên hệ báo giá
จำนวนที่ต้องการ (Chưa cập nhật)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | MHE3-MS1H-3/2G-1/8 |
| Mã vật tư FESTO | 525147 |
| Valve function | 3/2-way, single solenoid, closed |
| Kiểu điều khiển | Electrical |
| Chiều rộng kết cấu | 14 mm |
| Lưu lượng danh định tiêu chuẩn | 200 l/min |
| pneumatic working port | G1/8 |
| Operating voltage | 24 V DC |
| Áp suất làm việc | -0.09 MPa...0.8 MPa -0.9 bar...8 bar -13.05 psi...116 psi |
| Design | Pressure relief poppet valve |
| Type of reset | Mechanical spring |
| Cấp bảo vệ | IP65 |
| Approval | RCM c UL us - Recognised (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| Kích thước danh nghĩa | 3 mm |
| Grid dimension | 19 mm |
| Note on grid dimension | Minimum distance between the valves is 5 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Vị trí lắp đặt | Any |
| Manual override | Non-detenting |
| Type of piloting | Direct |
| Flow direction | Reversible with restrictions |
| lap | Underlap |
| Reverse polarity protection | Bipolar |
| Additional functions | Spark arresting Holding current reduction Protective circuit |
| Max. switching frequency | 280 Hz |
| Switching time off | 2.8 ms |
| Switching time on | 2.3 ms |
| Tolerance switching time off | +10 %/-50 % |
| Tolerance switching time on | +10%/-30% |
| Switching time dispersion from 1 Hz | 0.2 ms |
| Chu kỳ làm việc | 100% |
| Thông số cuộn điện | 24 V DC: low-current phase 1.6 W, high-current phase 6.5 W |
| Permissible voltage fluctuations | +/-10% |
| Môi chất làm việc | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Restrictions for environmental and media temperature | As a function of switching frequency (see graph) |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 6 according to ISO 14644-1 |
| Media temperature | -5 °C...60 °C |
| Nhiệt độ môi trường | -5 °C...60 °C |
| Khối lượng sản phẩm | 120 g |
| Kết nối điện | 2-pin Plug |
| Type of mounting | With through-hole |
| Kết nối khí nén cổng 1 | G1/8 |
| Kết nối khí nén cổng 2 | G1/8 |
| Pneumatic connection, port 3 | G1/8 |
| Note on materials | RoHS compliant |
| Material seals | HNBR NBR |
| Vật liệu thân | Die-cast zinc, coated |
| Material screws | Galvanised steel |
รหัสสินค้า: MSFG-24-EX
รหัสสินค้า: DNC-100-PPVA
รหัสสินค้า: VZBA-2"-GG-63-T-22-F0507-V4V4T
รหัสสินค้า: DGC-18-450-KF-PPV-A
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
