Chưa cập nhật
物料编码: DBS36E-S3EK02000
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Bộ mã hóa vòng quay SICK AFM60B-BHAA004096. Performance / Number of steps per revolution (max. resolution): 4,096 (12 bit); Performance / Number of revolutions: 4,096 (12 bit); Performance / Max. resolution (number of steps per revolution x number of revolutions): 12 bit x 12 bit (4,096 x 4,096)
物料编码
AFM60B-BHAA004096
单位
Cái
供货状态
Liên hệ báo giá
需求数量 (Cái)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | AFM60B-BHAA004096 |
| Mã đặt hàng của hãng | 1054924 |
| Performance / Number of steps per revolution (max. resolution) | 4,096 (12 bit) |
| Performance / Number of revolutions | 4,096 (12 bit) |
| Performance / Max. resolution (number of steps per revolution x number of revolutions) | 12 bit x 12 bit (4,096 x 4,096) |
| Performance / Error limits G | 0.05° 1) |
| Performance / Chú thích từ hãng | 1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.; 2) In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.; |
| Interfaces / Communication interface | SSI |
| Interfaces / Initialization time | 50 ms 1) |
| Interfaces / Position forming time | < 1 µs |
| Interfaces / Code type | Gray |
| Interfaces / Code sequence parameter adjustable | CW/CCW (V/R̅) parameter adjustable |
| Interfaces / Clock frequency | ≤ 2 MHz 2) |
| Interfaces / Set (electronic adjustment) | H-active (L = 0 - 3 V, H = 4,0 - U s V) |
| Interfaces / CW/CCW (counting sequence when turning) | L-active (L = 0 - 1,5 V, H = 2,0 - Us V) |
| Interfaces / Chú thích từ hãng | 1) Valid positional data can be read once this time has elapsed.; 2) Minimum, LOW level (Clock +): 250 ns.; |
| Electronics / Connection type | Male connector, M23, 12-pin, radial |
| Electronics / Supply voltage | 4.5 ... 32 V |
| Electronics / Power consumption | ≤ 0.7 W (without load) |
| Electronics / Reverse polarity protection | ✔ |
| Mechanics / Mechanical design | Blind hollow shaft |
| Mechanics / Shaft diameter | 15 mm |
| Mechanics / Characteristics of the shaft | Front clamp |
| Mechanics / Weight | 0.2 kg 1) |
| Mechanics / Shaft material | Stainless steel |
| Mechanics / Flange material | Aluminum |
| Mechanics / Housing material | Aluminum die cast |
| Mechanics / Start up torque | < 0.8 Ncm (+20 °C) |
| Mechanics / Operating torque | < 0.6 Ncm (+20 °C) |
| Mechanics / Permissible movement static | ± 0.3 mm (radial); ± 0.5 mm (axial); |
| Mechanics / Permissible movement dynamic | ± 0.1 mm (radial); ± 0.2 mm (axial); |
| Mechanics / Operating speed | ≤ 6,000 min⁻¹ 2) |
| Mechanics / Moment of inertia of the rotor | 40 gcm² |
| Mechanics / Angular acceleration | ≤ 500,000 rad/s² |
| Mechanics / Chú thích từ hãng | 1) Based on devices with male connector.; 2) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.; |
| Ambient data / EMC | According to EN 61000-6-2 and EN 61000-6-3 1) |
| Ambient data / Enclosure rating | IP65, shaft side (IEC 60529); IP67, housing side (IEC 60529) 2) ; |
| Ambient data / Permissible relative humidity | 90 % (Condensation not permitted) |
| Ambient data / Operating temperature range | –40 °C ... +100 °C 3) |
| Ambient data / Storage temperature range | –40 °C ... +100 °C, without package |
| Ambient data / Resistance to shocks | 70 g, 6 ms (EN 60068-2-27) |
| Ambient data / Resistance to vibration | 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Ambient data / Chú thích từ hãng | 1) EMC according to the standards quoted is achieved if shielded cables are used.; 2) For devices with male connector: with mounted mating connector.; 3) Stationary position of the cable.; |
物料编码: DBS36E-S3EK02000
物料编码: IMA18-10BE1ZC0K
物料编码: WTE280-2P4331
物料编码: DBS36E-S3EJ02000
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
Phân biệt ren G, R, NPT theo hình dạng, tài liệu và cơ chế làm kín. Có ảnh minh họa, quy trình nhận diện và checklist đặt đầu nối.
