Chưa cập nhật
物料编码: 3RA2816-0EW20
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Bộ điều khiển PLC SIEMENS 6ES7151-8FB01-0AB0. General information / HW functional status: 01; General information / Firmware version: V3.2; General information / Product function / Isochronous mode: No.
物料编码
6ES7151-8FB01-0AB0
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | 6ES7151-8FB01-0AB0 |
| Tên gọi chính hãng | *** spare part *** SIMATIC DP, IM151-8F PN/DP CPU for ET200S, 256 KB work memory, int. PROFINET interface (with three RJ45 ports) as IO Controller/I-device without battery, MMC required |
| General information / HW functional status | 01 |
| General information / Firmware version | V3.2 |
| General information / Product function / Isochronous mode | No |
| General information / Engineering with / Programming package | as of STEP 7 V5.5, Distributed Safety V5.4 SP4 or as of STEP 7 TIA Portal V11 |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 20.4 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes; against destruction |
| Supply voltage / external protection for power supply lines (recommendation) | 2 A min. |
| Supply voltage / Mains buffering / Mains/voltage failure stored energy time | 5 ms |
| Input current / Inrush current, typ. | 1.8 A |
| Input current / I²t | 0.13 A²·s |
| Input current / from supply voltage 1L+, max. | 352 mA; 426 mA with DP master module |
| Output current / for backplane bus (5 V DC), max. | 700 mA |
| Power loss / Power loss, typ. | 5.5 W |
| Storage / Work memory / integrated | 256 kbyte; For program and data |
| Storage / Work memory / expandable | No |
| Storage / Load memory / Plug-in (MMC) | Yes |
| Storage / Load memory / Plug-in (MMC), max. | 8 Mbyte |
| Storage / Load memory / Data management on MMC (after last programming), min. | 10 a |
| Storage / Backup / present | Yes; Ensured by SIMATIC Micro Memory Card (maintenance-free) |
| CPU processing times / for bit operations, typ. | 0.06 μs |
| CPU processing times / for word operations, typ. | 0.12 μs |
| for fixed point arithmetic, typ. | 0.16 μs |
| for floating point arithmetic, typ. | 0.59 μs |
| CPU-blocks / Number of elements (total) | 1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used. |
| CPU-blocks / DB / Number, max. | 1 024; Number range: 1 to 16000 |
| CPU-blocks / DB / Size, max. | 64 kbyte |
| CPU-blocks / FB / Number, max. | 1 024; Number range: 0 to 7999 |
| CPU-blocks / FB / Size, max. | 64 kbyte |
| CPU-blocks / FC / Number, max. | 1 024; Number range: 0 to 7999 |
| CPU-blocks / FC / Size, max. | 64 kbyte |
| CPU-blocks / OB / Number, max. | See S7-300 operation list |
| CPU-blocks / OB / Size, max. | 64 kbyte |
| CPU-blocks / OB / Number of free cycle OBs | 1; OB 1 |
| CPU-blocks / OB / Number of time alarm OBs | 1; OB 10 |
| CPU-blocks / OB / Number of delay alarm OBs | 2; OB 20, 21 |
| CPU-blocks / OB / Number of cyclic interrupt OBs | 4; OB 32, 33, 34, 35 |
| CPU-blocks / OB / Number of process alarm OBs | 1; OB 40 |
| CPU-blocks / OB / Number of DPV1 alarm OBs | 3; OB 55, 56, 57 |
| CPU-blocks / OB / Number of isochronous mode OBs | 1; OB 61; only for PROFINET |
| CPU-blocks / OB / Number of startup OBs | 1; OB 100 |
| CPU-blocks / OB / Number of asynchronous error OBs | 6; OB 80, 82, 83, 85, 86, 87 (OB83 only for centralized I/O and PROFINET IO) |
| CPU-blocks / OB / Number of synchronous error OBs | 2; OB 121, 122 |
| CPU-blocks / Nesting depth / per priority class | 16 |
| CPU-blocks / Nesting depth / additional within an error OB | 4 |
| Counters, timers and their retentivity / S7 counter / Number | 256 |
| S7 counter / Retentivity / adjustable | Yes |
| S7 counter / Retentivity / preset | Z 0 to Z 7 |
| S7 counter / Counting range / can be set | Yes |
| S7 counter / Counting range / lower limit | 0 |
| S7 counter / Counting range / upper limit | 999 |
| Counters, timers and their retentivity / IEC counter / present | Yes |
| Counters, timers and their retentivity / IEC counter / Type | SFB |
| Counters, timers and their retentivity / IEC counter / Number | Unlimited (limited only by RAM capacity) |
| Counters, timers and their retentivity / S7 timer / Number | 256 |
| S7 timer / Retentivity / adjustable | Yes |
| S7 timer / Retentivity / preset | No retentivity |
| S7 timer / Time range / lower limit | 10 ms |
| S7 timer / Time range / upper limit | 9 990 s |
| Counters, timers and their retentivity / IEC timer / present | Yes |
| Counters, timers and their retentivity / IEC timer / Type | SFB |
| Counters, timers and their retentivity / IEC timer / Number | Unlimited (limited only by RAM capacity) |
| Data areas and their retentivity / Retentive data area (incl. timers, counters, flags), max. | 64 kbyte |
| Size, max. | 256 byte |
| Retentivity available | Yes |
| Retentivity preset | MB 0 to MB 15 |
| Number of clock memories | 8; 1 memory byte |
| Data blocks / Retentivity adjustable | Yes; via non-retain property on DB |
| Data blocks / Retentivity preset | Yes |
| Local data / per priority class, max. | 32 768 byte; Max. 2048 bytes per block |
| Address area / I/O address area / Inputs | 2 048 byte |
| Address area / I/O address area / Outputs | 2 048 byte |
| I/O address area / of which distributed / Inputs | 2 048 byte |
| I/O address area / of which distributed / Outputs | 2 048 byte |
| Address area / Process image / Inputs, adjustable | 2 048 byte |
| Address area / Process image / Outputs, adjustable | 2 048 byte |
| Address area / Process image / Inputs, default | 128 byte |
| Address area / Process image / Outputs, default | 128 byte |
| Address area / Subprocess images / Number of subprocess images, max. | 1; With PROFINET IO, the length of the user data is limited to 1600 bytes |
| Address area / Digital channels / Inputs | 16 336 |
| Address area / Digital channels / of which central | 496 |
| Address area / Digital channels / Outputs | 16 336 |
| Address area / Analog channels / Inputs | 1 021 |
| Address area / Analog channels / of which central | 124 |
| Address area / Analog channels / Outputs | 1 021 |
| Hardware configuration / Number of modules per system, max. | 63; Centralized |
| Hardware configuration / Mounting rail / Number of mounting rails that can be used | 1 |
| Hardware configuration / Mounting rail / Length of mounting rail, max. | Station width: ≤ 1 m or < 2 m |
| Time of day / Clock / Hardware clock (real-time) | Yes |
| Time of day / Clock / retentive and synchronizable | Yes |
| Time of day / Clock / Backup time | 6 wk; At 40 °C ambient temperature, typically |
| Time of day / Clock / Deviation per day, max. | 10 s; Typ.: 2 s |
| Time of day / Clock / Behavior of the clock following POWER-ON | Clock continues running after POWER OFF |
| Time of day / Clock / Behavior of the clock following expiry of backup period | the clock continues at the time of day it had when power was switched off |
| Time of day / Operating hours counter / Number | 1 |
| Time of day / Operating hours counter / Number/Number range | 0 |
| Time of day / Operating hours counter / Range of values | 0 to 2^31 hours (when using SFC 101) |
| Time of day / Operating hours counter / Granularity | 1 h |
| Time of day / Operating hours counter / retentive | Yes; Must be restarted at each restart |
物料编码: 3RA2816-0EW20
物料编码: 3RT2035-1NB30
物料编码: 6MF2805-0AA00
物料编码: 6ES7440-1CS00-0YE0
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
