Chưa cập nhật
物料编码: DBS36E-S3EK02000
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Bộ mã hóa vòng quay SICK A3M60A-BEPB014x17. Performance / Number of steps per revolution (max. resolution): 16,384 (14 bit); Performance / Number of revolutions: 131,072 (17 bit); Performance / Max. resolution (number of steps per revolution x number of revolutions): 14 bit x 17 bit (16,384 x 131,072)
物料编码
A3M60A-BEPB014x17
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | A3M60A-BEPB014x17 |
| Mã đặt hàng của hãng | 1053332 |
| Performance / Number of steps per revolution (max. resolution) | 16,384 (14 bit) |
| Performance / Number of revolutions | 131,072 (17 bit) |
| Performance / Max. resolution (number of steps per revolution x number of revolutions) | 14 bit x 17 bit (16,384 x 131,072) |
| Performance / Error limits G | 0.35° (at room temperature) 1) |
| Performance / Chú thích từ hãng | 1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.; 2) In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.; |
| Interfaces / Communication interface | PROFIBUS DP |
| Interfaces / Communication Interface detail | DPV0 / DPV1 / DPV2 |
| Interfaces / Data transmission rate (baud rate) | ≤ 12 MBaud |
| Interfaces / Initialization time | Approx. 1 s |
| Interfaces / Parameterising data | Number of steps per revolution; Number of revolutions; PRESET; Counting direction; Sampling rate for position calculation; Unit for output of the speed value; Round axis functionality; |
| Interfaces / Available diagnostics data | Maximumspeed; Power-on counter; Operating hour counter; Counter for number of cw movements/number of ccw movements; Minimum andmaximum operating voltage; |
| Interfaces / Bus termination | DIP switch |
| Electronics / Connection type | Male connector, 2x, M12, 5-pin, axial; Female connector, 1x, M12, 5-pin, axial; |
| Electronics / Supply voltage | 10 ... 32 V |
| Electronics / Power consumption | ≤ 1.5 W |
| Electronics / Reverse polarity protection | ✔ |
| Mechanics / Mechanical design | Blind hollow shaft |
| Mechanics / Shaft diameter | 12 mm |
| Mechanics / Characteristics of the shaft | Front clamp |
| Mechanics / Weight | 0.28 kg |
| Mechanics / Shaft material | Stainless steel |
| Mechanics / Flange material | Aluminum |
| Mechanics / Housing material | Aluminum |
| Mechanics / Start up torque | 2 Ncm (+20 °C) |
| Mechanics / Operating torque | 1.6 Ncm (+20 °C) |
| Mechanics / Permissible movement static | ± 0.3 mm (radial); ± 0.5 mm (axial); |
| Mechanics / Permissible movement dynamic | ± 0.1 mm (radial); ± 0.2 mm (axial); |
| Mechanics / Operating speed | ≤ 6,000 min⁻¹ 1) |
| Mechanics / Angular acceleration | ≤ 500,000 rad/s² |
| Mechanics / Chú thích từ hãng | 1) Self warming 35 K at maximum operating speed.; |
| Ambient data / EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Ambient data / Enclosure rating | IP67, shaft side (IEC 60529); IP67, housing side (IEC 60529) 1) ; |
| Ambient data / Permissible relative humidity | 95 % (Condensation not permitted) |
| Ambient data / Operating temperature range | –30 °C ... +80 °C 2) |
| Ambient data / Storage temperature range | –40 °C ... +100 °C |
| Ambient data / Resistance to shocks | 80 g, 6 ms (EN 60068-2-27) |
| Ambient data / Resistance to vibration | 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Ambient data / Chú thích từ hãng | 1) With mating connector fitted.; 2) After self-heating has occurred. At temperatures below 0 °C, the device must be permanently energized.; |
物料编码: DBS36E-S3EK02000
物料编码: IMA18-10BE1ZC0K
物料编码: WTE280-2P4331
物料编码: DBS36E-S3EJ02000
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
