Đo áp suất
物料编码: QPL25.050
- 单位
- Cái
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Bộ nguồn công nghiệp SIEMENS 6EP1336-3BA10. General information / Technical Product Detail Page: https://i.siemens.com/1P6EP1336-3BA10; General information / product brand name: SITOP; General information / product type designation: PSU8200.
物料编码
6EP1336-3BA10
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | 6EP1336-3BA10 |
| Tên gọi chính hãng | SITOP PSU8200 20 A stabilized power supply input: 120-230 V AC 110-220 V DC output: 24 V DC/20 A |
| General information / Technical Product Detail Page | https://i.siemens.com/1P6EP1336-3BA10 |
| General information / product brand name | SITOP |
| General information / product type designation | PSU8200 |
| General information / product designation | Power supply SITOP modular |
| General information / type of current supply | 24 V/20 A |
| input / type of the power supply network | 1-phase and 2-phase AC or DC |
| input / phase number | 1 |
| input / voltage curve at input | AC/DC |
| input / supply voltage at AC / minimum rated value | 120 V |
| input / supply voltage at AC / maximum rated value | 230 V |
| input / supply voltage at AC / initial value | 85 V |
| input / supply voltage at AC / full-scale value | 275 V |
| input / supply voltage at AC | temperature derating necessary at Uin<100 V AC or DC at 50 °C; additional derating at Uin<100 V: Uin=95 V Pa max=460 W, Uin=90 V Pa max=440 W, Uin=85 V Pa max=420 W |
| input / supply voltage at DC | 110 ... 220 V |
| input / input voltage at DC | 88 ... 350 V |
| input / supply voltage / at 50 Hz | 230 V |
| input / supply voltage / at 60 Hz | 120 V |
| input / line frequency | 50/60 Hz; 47 ... 63 Hz |
| input / wide range input | Yes |
| input / buffering time for rated value of the output current in the event of power failure minimum | 20 ms |
| input / operating condition of the mains buffering | at Vin = 230 V |
| input / input current / at rated input voltage 120 V | 4.6 A |
| input / input current / at rated input voltage 230 V | 2.5 A |
| input / current limitation of inrush current at 25 °C maximum | 20 A |
| input / I2t value maximum | 5 A²·s |
| input / fuse protection type | Yes |
| input / fuse protection type in the feeder | Recommended miniature circuit breaker at 1-phase operation: 10 A characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2711-1HD10 (UL 489) at 120 V or 3RV2711- 1ED10 (UL 489) at 230 V |
| output / voltage curve at output | Controlled, isolated DC voltage |
| product function output voltage controlled | Yes |
| product function output voltage stabilized | Yes |
| output voltage at DC rated value | 24 V |
| output voltage / at output 1 at DC rated value | 24 V |
| output voltage / at output 1 at DC | 24 V |
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 24 ... 28 V |
| relative overall tolerance of the voltage | 3 % |
| relative control precision of the output voltage / on slow fluctuation of input voltage | 0.1 % |
| relative control precision of the output voltage / on slow fluctuation of ohm loading | 0.3 % |
| residual ripple / maximum | 100 mV |
| residual ripple / typical | 80 mV |
| voltage peak / maximum | 200 mV |
| voltage peak / typical | 100 mV |
| display version for normal operation | Green LED for 24 V OK |
| type of signal at output | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK" |
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| response delay maximum | 1.5 s |
| voltage increase time of the output voltage / typical | 250 ms |
| output current / rated value | 20 A |
| output current / rated range | 0 ... 20 A; +60 ... +70 °C: Derating 3%/K |
| supplied active power typical | 480 W |
| short-term overload current / at short-circuit during operation typical | 60 A |
| duration of overloading capability for excess current / at short-circuit during operation | 25 ms |
| constant overload current / on short-circuiting during the start-up typical | 30 A |
| bridging of equipment | Yes; switchable characteristic |
| number of parallel-switched equipment resources for increasing the power | 2 |
| efficiency / efficiency in percent | 94 % |
| efficiency / power loss [W] / at rated output voltage for rated value of the output current typical | 31 W |
| closed-loop control / relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical | 0.5 % |
| closed-loop control / relative control precision of the output voltage load step of resistive load 50/100/50 % typical | 1 % |
| closed-loop control / setting time / load step 50 to 100% typical | 1 ms |
| closed-loop control / setting time / load step 100 to 50% typical | 1 ms |
| closed-loop control / setting time / maximum | 5 ms |
| protection and monitoring / design of the overvoltage protection | < 31.8 V |
| protection and monitoring / property of the output short-circuit proof | Yes |
| protection and monitoring / design of short-circuit protection | Alternatively, constant current characteristic approx. 21.5 A or latching shutdown |
| protection and monitoring / typical | 21.5 A |
| in normal operation | overload capability 150 % Iout rated up to 5 s/min |
| enduring short circuit current RMS value / typical | 21.5 A |
| display version for overload and short circuit | LED yellow for "overload", LED red for "latching shutdown" |
| safety / galvanic isolation between input and output | Yes |
| safety / galvanic isolation | Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| safety / operating resource protection class | Class I |
| safety / leakage current / maximum | 3.5 mA |
| safety / leakage current / typical | 1 mA |
| safety / protection class IP | IP20 |
| EMC / standard / for emitted interference | EN 55022 Class B |
| EMC / standard / for mains harmonics limitation | EN 61000-3-2 |
| EMC / standard / for interference immunity | EN 61000-6-2 |
| ambient conditions / ambient temperature / during operation | -25 ... +70 °C; With natural convection; startup tested starting from -40 °C nominal voltage |
| ambient conditions / ambient temperature / during transport | -40 ... +85 °C |
| ambient conditions / ambient temperature / during storage | -40 ... +85 °C |
| ambient conditions / environmental category according to IEC 60721 | Climate class 3K3, 5 ... 95% no condensation |
| connection method / type of electrical connection | screw terminal |
| at input | L, N, PE: 1 screw terminal each for 0.2 ... 4 mm² single-core/finely stranded |
| at output | +, -: 2 screw terminals each for 0.2 ... 4 mm² |
| for auxiliary contacts | 13, 14 (alarm signal), 15, 16 (Remote ON OFF): 1 screw terminal each for 0.14 ... 1.5 mm² |
| mechanical data / width × height × depth of the enclosure | 90 × 125 × 125 mm |
| mechanical data / installation width × mounting height | 90 mm × 225 mm |
| mechanical data / required spacing / top | 50 mm |
| mechanical data / required spacing / bottom | 50 mm |
| mechanical data / required spacing / left | 0 mm |
| mechanical data / required spacing / right | 0 mm |
| mechanical data / fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| mechanical data / DIN-rail mounting | Yes |
| mechanical data / S7 rail mounting | No |
| mechanical data / wall mounting | No |
| mechanical data / housing can be lined up | Yes |
| mechanical data / net weight | 1.2 kg |
| accessories / electrical accessories | Buffer module |
| accessories / mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
物料编码: QPL25.050
物料编码: QPL25.500B
物料编码: SQM45.295B9
物料编码: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
