Chưa cập nhật
物料编码: IFS203
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Cảm biến áp suất IFM PM1714. Number of inputs and outputs: Number of digital outputs: 1; Number of analog outputs: 1; Measuring range: -1...16 bar: -14.6...232 psi: -0.1...1.6 MPa.
物料编码
PM1714
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | PM1714 |
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
| Measuring range | -1...16 bar: -14.6...232 psi: -0.1...1.6 MPa |
| Process connection | threaded connection G 1 external thread with Aseptoflex Vario sealing contour |
| Note | G1 Gewinde nach ISO 228. Alternativ dichtend über rückwärtige Dichtkontur mit Dichtung in Anlehnung an DIN EN ISO 1179-2. |
| Special feature | gold-plated contacts |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Temperature monitoring | no |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25...150 |
| Min. burst pressure | 250 bar: 3625 psi: 25 MPa |
| Pressure rating | 75 bar: 1085 psi: 7.5 MPa |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure; vacuum |
| No dead space | yes |
| MAWP (for applications according to CRN) [bar] | 60 |
| Operating voltage [V] | 18...30 DC |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Current consumption [mA] | 3.5...21.5; < 45 |
| Power-on delay time [s] | 1; 0.5 |
| Total number of outputs | 2 |
| Output signal | analog signal; IO-Link; (configurable) |
| Number of digital outputs | 1; (IO-Link) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable) |
| Max. load [Ω] | 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) |
| Short-circuit proof | yes |
| Overload protection | yes |
| Analog start point | -1...12.8 bar: -14.6...185.6 psi: -0.1...1.28 MPa |
| Analog end point | 2.2...16 bar: 32...232 psi: 0.22...1.6 MPa |
| In steps of | 0.01 bar: 0.2 psi: 0.001 MPa |
| Factory setting | ASP = 0.0 bar: AEP = 16.0 bar |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Total deviation over temperature range | Temperature range: total deviation; -25...15 °C: Characteristics deviation ± 0,05 % of the span / 10 K; 15...80 °C: Characteristics deviation; 80...150 °C: Characteristics deviation ± 0,1 % of the span / 10 K |
| Notes on the accuracy / deviation | for further details see section Diagrams and graphs |
| Damping for the analog output dAA [s] | 0...4 |
| Step response time analog output [ms] | 30; 7 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis |
| SIO mode | no |
| Required master port class | A |
| Process data analog | 3 |
| Min. process cycle time [ms] | 3.2 |
| IO-Link resolution pressure [bar] | 0.005 |
| IO-Link functions (acyclical) | application specific tag; internal temperature |
| Supported DeviceIDs | Type of operation: DeviceID; default: 661 |
| Ambient temperature [°C] | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67; IP 68; IP 69K |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 323 |
| Note on approval | Factory certificate available as download at www.factory-certificate.ifm |
| UL approval | UL approval number: J021 |
| Weight [g] | 308.3 |
| Housing | tubular |
| Dimensions [mm] | Ø 30.2 / L = 111 |
| Material | stainless steel (1.4404 / 316L); PBT |
| Materials (wetted parts) | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; PTFE |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 35 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
物料编码: IFS203
物料编码: EVT406
物料编码: IG5526
物料编码: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
