Chưa cập nhật
物料编码: IFS203
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Cảm biến lưu lượng IFM SB2234. Measuring range: 1...50 l/min: 0.06...3 m³/h: 16...793 gph: 0.26...13.2 gpm; -10...100 °C: 14...212 °F; Process connection: threaded connection G 3/4 Internal thread.
物料编码
SB2234
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | SB2234 |
| Measuring range | 1...50 l/min: 0.06...3 m³/h: 16...793 gph: 0.26...13.2 gpm; -10...100 °C: 14...212 °F |
| Process connection | threaded connection G 3/4 Internal thread |
| Special feature | gold-plated contacts |
| Media | Liquids; oils (viscosity 46 mm²/s at 40 °C) |
| Medium temperature [°C] | -10...100 |
| Pressure rating | 100 bar: 10 MPa |
| Note on pressure rating | at medium temperature >70°C: 80 bar / 8 MPa |
| Operating voltage [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 3 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; frequency signal; IO-Link |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Max. current load per output [mA] | 150; (200: ...60 °C; Ambient temperature; 250: ...40 °C; Ambient temperature) |
| Analog current output [mA] | 4...20 |
| Max. load [Ω] | 500 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Frequency of the output [Hz] | 0...10000 |
| Display range | 0...60 l/min: 0...3.6 m³/h: 0...951 gph: 0...15.86 gpm; -32...122 °C: -25.6...251.6 °F |
| Resolution | 0.01 l/min: 0.001 m³/h: 1 gph: 0.01 gpm; 0.1 °C: 0.1 °F |
| Set point SP | 0.35...50 l/min: 0.02...3 m³/h: 5...793 gph: 0.08...13.2 gpm; -9.3...100 °C: 15.2...212 °F |
| Reset point rP | 0...49.65 l/min: 0...2.98 m³/h: 0...787 gph: 0...13.12 gpm; -10...99.3 °C: 14...210.8 °F |
| Frequency end point, FEP | 3.35...50 l/min: 0.2...3 m³/h: 53...793 gph: 0.88...13.2 gpm; 12...100 °C: 53.6...212 °F |
| In steps of | 0.05 l/min: 0.005 m³/h: 1 gph: 0.02 gpm; 0.1 °C: 0.2 °F |
| Frequency at the end point FRP [Hz] | 10...10000 |
| In steps of [Hz] | 10 |
| Measuring dynamics | 1:50 |
| Frequency start point, FSP | -10...78 °C: 14...172.4 °F |
| Accuracy (in the measuring range) | ± 5 % MEW; (Q > 1 l/min; 20...70 °C Medium temperature) |
| Repeatability | ± 1 % MEW |
| Temperature drift | 0,029 °C / K |
| Accuracy [K] | 3 K (25°C; Q > 1 l/min) |
| Response time [s] | 0.01 |
| Damping process value dAP [s] | 0...5 |
| In steps of [s] | 0.1 |
| Damping for the analog output dAA [s] | 0...5 |
| Dynamic response T05 / T09 [s] | T09 = 120 (Q > 1 l/min) |
| Parameter setting options | hysteresis / window; normally open / closed; switching logic; current/frequency output; damping for the switching output / analog output; display can be rotated and switched off; standard unit of measurement; process value color; calibration factor |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 2 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 3.2 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1045 |
| Ambient temperature [°C] | 0...60 |
| Note on ambient temperature | medium temperature < 80 °C; medium temperature < 100 °C: 0...40 °C |
| Storage temperature [°C] | -15...80 |
| Protection | IP 65; IP 67 |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 145 |
| UL approval | UL approval number: I005; File number UL: E174189 |
| Pressure equipment directive | sound engineering practice |
| Weight [g] | 991.5 |
| Material | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated |
| Materials (wetted parts) | stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM |
| Switching cycles mechanical | 10 million |
| Display | Display unit: 6 x LED, green; Switching status: 2 x LED, yellow; Measured values: alphanumeric display, red/green alternating indication 4-digit; Programming: alphanumeric display, 4-digit |
| Remarks | Use of 200 micron filtration is recommended.; All data refer to oil with the following nominal viscosity: 46 mm²/s, 40 °C; MW = Measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
物料编码: IFS203
物料编码: EVT406
物料编码: IG5526
物料编码: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
