Chưa cập nhật
物料编码: IFS203
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Cảm biến lưu lượng IFM SM8601. Number of inputs and outputs: Number of digital outputs: 2; Number of analog outputs: 1; Measuring range: 6...1584 gph: 0.1...26.4 gpm.
物料编码
SM8601
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | SM8601 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Measuring range | 6...1584 gph: 0.1...26.4 gpm |
| Process connection | threaded connection 1" NPT Internal thread DN25 |
| Special feature | gold-plated contacts |
| Application | Totalizer function; for industrial applications |
| Media | Conductive liquids; water; water-based media |
| Note on media | conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C) |
| Medium temperature [°F] | 14...158 |
| Pressure rating | 16 bar: 232 psi: 1.6 MPa |
| MAWP (for applications according to CRN) | 10.4 bar: 1.04 MPa |
| Operating voltage [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption [mA] | 95; (24 V) |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 5 |
| Measuring principle | magnetic-inductive |
| Inputs | counter reset |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; pulse signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 200 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable) |
| Max. load [Ω] | 500 |
| Analog voltage output [V] | 0...10; (scalable) |
| Min. load resistance [Ω] | 2000 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Display range | -1902...1902 gph: -31.7...31.7 gpm |
| Resolution | 2 gph: 0.05 gpm |
| Set point SP | 14...1586 gph: 0.25...26.4 gpm |
| Reset point rP | 6...1578 gph: 0.1...26.25 gpm |
| Analog start point ASP | 0...1272 gph: 0...21.2 gpm |
| Analog end point AEP | 312...1586 gph: 5.2...26.4 gpm |
| In steps of | 2 gph: 0.05 gpm |
| Pulse value | 0.01...100 000 000 gal |
| Pulse length [s] | 0,0025...2 |
| Measuring range [°F] | -4...176 |
| Resolution [°F] | 0.5 |
| Set point SP [°F] | -2.5...176 |
| Reset point rP [°F] | -3.5...175 |
| Analog start point [°F] | -4...140.5 |
| Analog end point [°F] | 31.5...176 |
| In steps of [°F] | 0.5 |
| Accuracy (in the measuring range) | ± (0,8 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2% MEW |
| Accuracy [K] | ± 2,5 (Q > 0,26 gpm) |
| Response time [s] | 0.15; (dAP = 0, T19) |
| Delay time programmable dS, dr [s] | 0...50 |
| Damping process value dAP [s] | 0...5 |
| Dynamic response T05 / T09 [s] | T09 = 20 (Q > 0,26 gpm) |
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / closed; switching logic; current/voltage/pulse output; Start-up delay; display can be deactivated; Display unit |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 3 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 5 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 576 |
| Ambient temperature [°F] | 14...140 |
| Storage temperature [°F] | -13...176 |
| Protection | IP 67 |
| EMC | DIN EN 60947-5-9 |
| Shock resistance | DIN EN 60068-2-27: 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 145 |
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g] | 698.5 |
| Housing | tubular |
| Inlet pipe length | 3 x DN |
| Outlet pipe length | 1 x DN |
| Dimensions [mm] | Ø 54 / L = 110 |
| Material | stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE |
| Materials (wetted parts) | stainless steel (1.4404 / 316L); PEEK; FKM |
| Display | Display unit: 6 x LED, green (gpm, gph, gal, °F, 10³, 1000 x 10³); Switching status: 2 x LED, yellow; Measured values: alphanumeric display, 4-digit; Programming: alphanumeric display, 4-digit |
| Remarks | MW = Measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
物料编码: IFS203
物料编码: EVT406
物料编码: IG5526
物料编码: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
