Đo áp suất
物料编码: QPL25.050
- 单位
- Cái
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Module ắc quy SIEMENS 6EP1935-6ME21. General information / Technical Product Detail Page: https://i.siemens.com/1P6EP1935-6ME21; General information / product brand name: SITOP; General information / product type designation: Battery module.
物料编码
6EP1935-6ME21
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | 6EP1935-6ME21 |
| Tên gọi chính hãng | SITOP battery module 24 V/7 Ah with maintenance free sealed lead-acid batteries for SITOP DC UPS module 6 A, 15 A and 40 A |
| General information / Technical Product Detail Page | https://i.siemens.com/1P6EP1935-6ME21 |
| General information / product brand name | SITOP |
| General information / product type designation | Battery module |
| General information / product designation | Battery module 7 Ah |
| General information / type of battery | maintenance-free lead-acid batteries |
| General information / product version | Extension module/battery module |
| electrical data / end-of-charge voltage at DC / at -10 °C recommended | 29 V |
| electrical data / end-of-charge voltage at DC / at 0 °C recommended | 28.4 V |
| electrical data / end-of-charge voltage at DC / at 10 °C recommended | 27.8 V |
| electrical data / end-of-charge voltage at DC / at 20 °C recommended | 27.3 V |
| electrical data / end-of-charge voltage at DC / at 30 °C recommended | 26.8 V |
| electrical data / end-of-charge voltage at DC / at 40 °C recommended | 26.6 V |
| electrical data / end-of-charge voltage at DC / at 50 °C recommended | 26.3 V |
| output / battery capacity | 7 A·h |
| output / output current in buffering mode maximum | 30 A |
| output / peak current | 30 A |
| output / charging current maximum | 1.75 A |
| output / output voltage at DC rated value | 24 V |
| interfaces / communication function | No |
| protection and monitoring / design of short-circuit protection | Battery fuse 20 A/32 V (solid-state circuitry blade-type fuse + support) |
| protection and monitoring / design of the overload protection | Valve control |
| safety / operating resource protection class | Class III |
| safety / protection class IP | IP00 |
| ambient conditions / ambient condition | For storage, mounting and operation of lead-acid batteries, the relevant DIN/VDE regulations or country-specific regulations (e.g. VDE 0510 Part 2/EN 50272-2) must be observed. You must ensure that the battery site is sufficiently ventilated. Possible sources of ignition must be at least 50 cm away. |
| ambient conditions / ambient temperature / during operation | -15 ... +50 °C |
| ambient conditions / ambient temperature / during transport | -20 ... +50 °C |
| ambient conditions / ambient temperature / during storage | -20 ... +50 °C |
| ambient conditions / relative temporary capacity loss at 20 °C in a month typical | 3 % |
| service life / service life of energy storage / typical | capacity falls to 80 % of original capacity (according to EUROBAT) |
| service life / service life of energy storage / at 20 °C typical | 4 a |
| service life / service life of energy storage / at 30 °C typical | 2 a |
| service life / service life of energy storage / at 40 °C typical | 1 a |
| service life / service life of energy storage / at 50 °C typical | 0.5 a |
| service life / note | Along with the storage and operating temperature, other factors such as the duration of the storage period and the charge status during storage have a decisive influence on the possible useful life. Batteries should therefore be stored as briefly as possible, always fully charged, and within the temperature range 0 to +20 °C. |
| connection method / type of electrical connection | spring-loaded terminals |
| connection method / for UPS module | 1 screw terminal each for 0.08 ... 4 mm² for + BAT and - BAT |
| mechanical data / width × height × depth of the enclosure | 186 × 168 × 121 mm |
| mechanical data / installation width × mounting height | 206 mm × 188 mm |
| mechanical data / fastening method | can be screwed onto flat surface (keyhole mounting for hooking in to M4 screws) |
| mechanical data / DIN-rail mounting | No |
| mechanical data / S7 rail mounting | No |
| mechanical data / wall mounting | Yes |
| mechanical data / net weight | 6 kg |
| mechanical data / number of cells | 12 |
| accessories / product component included | Accessories pack with solid-state circuitry fuse 20 A and 30 A |
| further information internet links / internet link / to website: Industry Mall | https://mall.industry.siemens.com |
| further information internet links / internet link / to web page: selection aid TIA Selection Tool | https://www.siemens.com/tstcloud |
| further information internet links / internet link / to web page: power supplies | https://siemens.com/sitop |
| further information internet links / internet link / to website: CAx-Download-Manager | https://www.siemens.com/cax |
| further information internet links / internet link / to website: Industry Online Support | https://support.industry.siemens.com |
| additional information / other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| security information / security information | Siemens provides products and solutions with industrial cybersecurity functions |
物料编码: QPL25.050
物料编码: QPL25.500B
物料编码: SQM45.295B9
物料编码: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
