Đo áp suất
物料编码: QPL25.050
- 单位
- Cái
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Module ngõ vào tương tự SIEMENS 6ES7134-6HB00-0CA1. General information / Tên kiểu sản phẩm: AI 2xU/I 2-/4-wire HF; General information / HW functional status: FS22 or higher; General information / Firmware version: V3.0.0.
物料编码
6ES7134-6HB00-0CA1
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | 6ES7134-6HB00-0CA1 |
| Tên gọi chính hãng | SIMATIC ET 200SP, Analog input module, AI 2x U/I 2-.4-wire High Feat., suitable for BU type A0, A1, Color code CC05, channel diagnostics, 16 bit, +/-0.1% |
| General information / Tên kiểu sản phẩm | AI 2xU/I 2-/4-wire HF |
| General information / HW functional status | FS22 or higher |
| General information / Firmware version | V3.0.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0, A1 |
| General information / Color code for module-specific color-coded label | CC05 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | Yes; 250 μs |
| General information / Product function / Measuring range scalable | Yes |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V21.1 or higher |
| General information / Engineering with / STEP 7 configurable/integrated from version | configurable as of V5.7.3.3 with HSP0348 V3.0 / integrated as of V5.7.5.0 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.50 |
| General information / Operating mode / Oversampling | No |
| General information / Operating mode / MSI | Yes |
| CiR - Configuration in RUN / Reparameterization possible in RUN | Yes |
| CiR - Configuration in RUN / Calibration possible in RUN | Yes |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Input current / Current consumption (rated value) | 39 mA |
| Input current / Current consumption, max. | 240 mA |
| Encoder supply / 24 V encoder supply / 24 V | Yes; For current measurement |
| Encoder supply / 24 V encoder supply / Short-circuit protection | Yes |
| Encoder supply / 24 V encoder supply / Output current, max. | 20 mA; max. 50 mA per channel for a duration < 10 s (two-wire) |
| 24 V | Yes; for current and voltage measurements |
| Short-circuit protection | Yes; channel by channel |
| Output current, max. | 100 mA; max. 150 mA for a duration of < 10 s (four-wire) |
| Power loss / Power loss, typ. | 0.95 W |
| Address area / Address space per module / Address space per module, max. | 4 byte; + 4 byte for scaling of measured values, + 1 byte for QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | Type A |
| Hardware configuration / Selection of BaseUnit for connection variants / 2-wire connection | BU type A0, A1 |
| Hardware configuration / Selection of BaseUnit for connection variants / 4-wire connection | BU type A0, A1 |
| Analog inputs / Số ngõ vào tương tự | 2; Differential inputs |
| Analog inputs / For current measurement | 2 |
| Analog inputs / For voltage measurement | 2 |
| Analog inputs / permissible input voltage for voltage input (destruction limit), max. | 30 V |
| Analog inputs / permissible input current for current input (destruction limit), max. | 50 mA |
| Analog inputs / Cycle time (all channels), min. | Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels) |
| Analog inputs / Standardization of measured values | Yes |
| Analog inputs / Input ranges (rated values), voltages / 0 to +10 V | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (0 to 10 V) | 75 k Ω |
| Analog inputs / Input ranges (rated values), voltages / 1 V to 5 V | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (1 V to 5 V) | 75 k Ω |
| Analog inputs / Input ranges (rated values), voltages / -10 V to +10 V | Yes; 16 bit incl. sign |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (-10 V to +10 V) | 75 k Ω |
| Analog inputs / Input ranges (rated values), voltages / -5 V to +5 V | Yes; 16 bit incl. sign |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (-5 V to +5 V) | 75 k Ω |
| Analog inputs / Input ranges (rated values), currents / 0 to 20 mA | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), currents / Input resistance (0 to 20 mA) | 130 Ω |
| Analog inputs / Input ranges (rated values), currents / -20 mA to +20 mA | Yes; 16 bit incl. sign |
| Analog inputs / Input ranges (rated values), currents / Input resistance (-20 mA to +20 mA) | 130 Ω |
| Analog inputs / Input ranges (rated values), currents / 4 mA to 20 mA | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), currents / Input resistance (4 mA to 20 mA) | 130 Ω |
| Analog inputs / Cable length / shielded, max. | 1 000 m; 200 m for voltage measurement |
| Analog value generation for the inputs / Measurement principle | Sigma Delta |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 16 bit |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizable | Yes |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 / 300 / 600 / 1 200 / 2 400 / 4 800 |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Conversion time (per channel) | 68.2 / 23 / 19.2 / 10.45 / 5.40 / 2.85 / 1.6 / 0.9 ms |
| Analog value generation for the inputs / Smoothing of measured values / Number of smoothing levels | 6; none; 2-/4-/8-/16-/32-fold |
| Analog value generation for the inputs / Smoothing of measured values / parameterizable | Yes |
| Encoder / Connection of signal encoders / for voltage measurement | Yes |
| Encoder / Connection of signal encoders / for current measurement as 2-wire transducer | Yes |
| Encoder / Connection of signal encoders / Burden of 2-wire transmitter, max. | 650 Ω |
| for current measurement as 4-wire transducer | Yes |
| Errors/accuracies / Linearity error (relative to input range), (+/-) | 0.01 % |
| Errors/accuracies / Temperature error (relative to input range), (+/-) | 0.003 %/K |
| Errors/accuracies / Crosstalk between the inputs, min. | -50 dB |
| Errors/accuracies / Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.01 % |
| Errors/accuracies / Operational error limit in overall temperature range / Voltage, relative to input range, (+/-) | 0.1 % |
| Errors/accuracies / Operational error limit in overall temperature range / Current, relative to input range, (+/-) | 0.1 % |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Voltage, relative to input range, (+/-) | 0.05 %; 0.1 % at SFU 4.8 kHz |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Current, relative to input range, (+/-) | 0.05 %; 0.1 % at SFU 4.8 kHz |
| Errors/accuracies / Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency / Common mode voltage, max. | 35 V |
| Errors/accuracies / Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency / Common mode interference, min. | 90 dB |
| Isochronous mode / Filtering and processing time (TCI), min. | 800 μs |
| Isochronous mode / Bus cycle time (TDP), min. | 1 ms |
| Isochronous mode / Jitter, max. | 5 μs |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Limit value alarm | Yes; two upper and two lower limit values in each case |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes; Measuring range 4 to 20 mA only |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | Yes; channel-by-channel, at 1 to 5 V or for short-circuit in encoder supply |
| Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | Yes |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Potential separation / Potential separation channels / between the channels and the power supply of the electronics | Yes |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Security / signed firmware update | Yes; firmware V3.0.0 or higher |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | -30 °C; < 0 °C as of FS06 |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
物料编码: QPL25.050
物料编码: QPL25.500B
物料编码: SQM45.295B9
物料编码: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
