Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module bảo vệ chọn lọc SIEMENS 6EP1961-2BA11. General information / Technical Product Detail Page: https://i.siemens.com/1P6EP1961-2BA11; General information / product brand name: SITOP; General information / product type designation: PSE200U.
品番
6EP1961-2BA11
単位
Chưa cập nhật
供給状況
Liên hệ báo giá
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6EP1961-2BA11 |
| Tên gọi chính hãng | SITOP PSE200U 3 A selectivity module 4-channel input: 24 V DC/12 A output: 24 V DC/4x 3 A threshold value adjustable 0.5-3 A with common signaling contact |
| General information / Technical Product Detail Page | https://i.siemens.com/1P6EP1961-2BA11 |
| General information / product brand name | SITOP |
| General information / product type designation | PSE200U |
| General information / product designation | SITOP Selectivity module |
| General information / type of current supply | Selectivity module, 4 x 3 A Common signal contact |
| input / type of the power supply network | Controlled DC voltage |
| input / supply voltage at DC rated value | 24 V |
| input / input voltage at DC | 22 ... 30 V |
| input / overvoltage overload capability | 35 V |
| input / input current at rated input voltage 24 V rated value | 12 A |
| output / voltage curve at output | controlled DC voltage |
| output / formula for output voltage | Vin - approx. 0.2 V |
| output / relative overall tolerance of the voltage note | In accordance with the supplying input voltage |
| output / number of outputs | 4 |
| output / output current up to 60 °C per output rated value | 3 A |
| output / adjustable current response value current of the current- dependent overload release | 0.5 ... 3 A |
| output / type of response value setting | via potentiometer |
| output / response delay maximum | 5 s |
| output / product feature parallel switching of outputs | No |
| output / type of outputs connection | simultaneous switch-on of all outputs after power-up of the supply voltage > 20 V, delay time of 25 ms, 100 ms, or "load-optimized" via DIP switch configurable for sequential switch-on |
| efficiency / efficiency in percent | 97 % |
| efficiency / power loss [W] at rated output voltage for rated value of the output current typical | 9 W |
| switch-off characteristic / switching characteristic / of the excess current | Iout = 1.0 ...1.5 x set value, switch-off after approx. 5 s |
| switch-off characteristic / switching characteristic / of the current limitation | Iout = 1.5 x set value, switch-off after typ. 100 ms |
| switch-off characteristic / switching characteristic / of the immediate switch-off | Iout > set value and Vin < 20 V, switch-off after approx. 0.5 ms |
| switch-off characteristic / residual current at switch-off typical | 1 mA |
| design of the reset device/resetting mechanism | via sensor per output |
| remote reset function | non-isolated 24 V input (signal level "high" at > 15 V) |
| protection and monitoring / fuse protection type at input | 5 A per output (not accessible) |
| protection and monitoring / display version for normal operation | Three-color LED per output: green LED for "Output switched through"; yellow LED for "Output switched off manually"; red LED for "Output switched off due to overcurrent" |
| protection and monitoring / design of the switching contact for signaling function | Common signal contact (changeover contact, rating 0.1 A/24 V DC) |
| safety / galvanic isolation between input and output at switch-off | No |
| safety / standard for safety | according to EN 62368-1 |
| safety / operating resource protection class | Class III |
| safety / protection class IP | IP20 |
| safety / standard / for emitted interference | EN 55022 Class B |
| safety / standard / for interference immunity | EN 61000-6-2 |
| ambient conditions / ambient temperature / during operation | -25 ... +60 °C; with natural convection |
| ambient conditions / ambient temperature / during transport | -40 ... +85 °C |
| ambient conditions / ambient temperature / during storage | -40 ... +85 °C |
| ambient conditions / environmental category according to IEC 60721 | Climate class 3K3, 5 ... 95% no condensation |
| connection method / type of electrical connection | screw terminal |
| connection method / at input | +24 V: 2 screw terminals for 0.5 ... 16 mm²; 0 V: 2 screw terminals for 0.5 ... 4 mm² |
| connection method / at output | Output 1 ... 4: 1 screw terminal each for 0.5 ... 4 mm² |
| connection method / for auxiliary contacts | Remote reset: 1 screw terminal for 0.5 ... 4 mm² |
| connection method / for signaling contact | 3 screw terminals for 0.5 ... 4 mm² |
| mechanical data / width × height × depth of the enclosure | 72 × 80 × 72 mm |
| mechanical data / installation width × mounting height | 72 mm × 180 mm |
| top | 50 mm |
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 0.2 kg |
| accessories / mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
| further information internet links / internet link / to website: Industry Mall | https://mall.industry.siemens.com |
| further information internet links / internet link / to web page: selection aid TIA Selection Tool | https://www.siemens.com/tstcloud |
| further information internet links / internet link / to web page: power supplies | https://siemens.com/sitop |
| further information internet links / internet link / to website: CAx-Download-Manager | https://siemens.com/cax |
| further information internet links / internet link / to website: Industry Online Support | https://support.industry.siemens.com |
| further information internet links / identification link | Yes; acc. to IEC 61406-1:2022 |
| additional information / other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| security information / security information | Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement - and continuously maintain - a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7) |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
