Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ vào số SIEMENS 6ES7136-6BA01-0CA0. General information / Tên kiểu sản phẩm: F-DI 8x24VDC HF; General information / HW functional status: 04 and 12; General information / Firmware version: V3.0.
品番
6ES7136-6BA01-0CA0
単位
Cái
供給状況
Liên hệ báo giá
必要数量 (Cái)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7136-6BA01-0CA0 |
| Tên gọi chính hãng | SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508) |
| General information / Tên kiểu sản phẩm | F-DI 8x24VDC HF |
| General information / HW functional status | 04 and 12 |
| General information / Firmware version | V3.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0 |
| General information / Color code for module-specific color-coded label | CC01 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | SIMATIC Safety V20 and V21 or higher with HSP 0484 |
| General information / Engineering with / STEP 7 configurable/integrated from version | as 6ES7136-6BA00-0CA0 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.45 |
| General information / Operating mode / DI | Yes |
| General information / Operating mode / Counter | Yes; pulse counting, standstill and speed monitoring |
| CiR - Configuration in RUN / Reparameterization possible in RUN | No |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Supply voltage / power supply according to NEC Class 2 required | No |
| Input current / Current consumption, max. | 40 mA; without load |
| Encoder supply / Number of outputs | 8 |
| Encoder supply / 24 V encoder supply / 24 V | Yes; min. L+ (-1.5 V) |
| Encoder supply / 24 V encoder supply / Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 1.8 A) |
| Encoder supply / 24 V encoder supply / Output current per channel, max. | 300 mA |
| Encoder supply / 24 V encoder supply / Output current per module, max. | 800 mA; Total current of all encoders |
| Power loss / Power loss, typ. | 2 W |
| Address area / Address space per module / Inputs | 7 byte; S7-300/400F CPU, 6 byte |
| Address area / Address space per module / Outputs | 5 byte; S7-300/400F CPU, 4 byte |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Electronic coding element type F | Yes |
| Digital inputs / Số ngõ vào số | 8 |
| Digital inputs / Digital inputs, parameterizable | Yes |
| Digital inputs / Sourcing/sinking input | Yes; P-reading |
| Digital inputs / Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| Digital inputs / Digital input functions, parameterizable / Counter | Yes |
| Digital inputs / Digital input functions, parameterizable / Number, max. | 1 |
| Digital inputs / Digital input functions, parameterizable / Counting frequency, max. | 500 Hz |
| Digital inputs / Digital input functions, parameterizable / Counting direction up/down | Yes |
| Digital inputs / Input voltage / Rated value (DC) | 24 V |
| Digital inputs / Input voltage / for signal "0" | -30 to +5 V |
| Digital inputs / Input voltage / for signal "1" | +15 to +30 V |
| Digital inputs / Input current / for signal "1", typ. | 3.7 mA |
| Input delay (for rated value of input voltage) / for standard inputs / parameterizable | Yes |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", min. | 0.4 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max. | 20 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", min. | 0.4 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", max. | 20 ms |
| Input delay (for rated value of input voltage) / for technological functions / parameterizable | No |
| Digital inputs / Cable length / shielded, max. | 1 000 m |
| Digital inputs / Cable length / unshielded, max. | 500 m |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Hardware interrupt | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / RUN LED | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / ERROR LED | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Potential separation / Potential separation channels / between the channels and the power supply of the electronics | No |
| Isolation / Isolation tested with | 707 V DC (type test) |
| environmental product declaration | Yes |
| Highest safety class achievable in safety mode / Performance level according to ISO 13849-1 | PLe |
| Highest safety class achievable in safety mode / Category according to ISO 13849-1 | Cat. 4 |
| Highest safety class achievable in safety mode / SIL acc. to IEC 61508 | SIL 3 |
| Highest safety class achievable in safety mode / Probability of failure (for service life of 20 years and repair time of 100 hours) / Low demand mode: PFDavg in accordance with SIL3 | < 2.00E-05 |
| Highest safety class achievable in safety mode / Probability of failure (for service life of 20 years and repair time of 100 hours) / High demand/continuous mode: PFH in accordance with SIL3 | < 1.00E-09 1/h |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 50 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 4 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 73 mm |
| Dimensions / Chiều sâu | 58 mm |
| Weights / Khối lượng xấp xỉ | 29 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
