Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ ra số SIEMENS 6ES7322-1BH01-0AA0. Supply voltage / Load voltage L+ / Rated value (DC): 24 V; Supply voltage / Load voltage L+ / permissible range, lower limit (DC): 20.4 V; Supply voltage / Load voltage L+ / permissible range, upper limit (DC): 28.8 V.
品番
6ES7322-1BH01-0AA0
単位
Cái
供給状況
Liên hệ báo giá
必要数量 (Cái)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7322-1BH01-0AA0 |
| Tên gọi chính hãng | ***spare part*** SIMATIC S7-300, digital output SM 322, isolated, 16 DO, 24 V DC, 0.5 A, 1x 20-pole, total current 4 A/group (8 A/module) |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V |
| Supply voltage / Load voltage L+ / permissible range, lower limit (DC) | 20.4 V |
| Supply voltage / Load voltage L+ / permissible range, upper limit (DC) | 28.8 V |
| Input current / from load voltage L+ (without load), max. | 80 mA |
| Input current / from backplane bus 5 V DC, max. | 80 mA |
| Power loss / Power loss, typ. | 4.9 W |
| Digital outputs / Số ngõ ra số | 16 |
| Digital outputs / Short-circuit protection | Yes; Electronic |
| Digital outputs / Response threshold, typ. | 1 A |
| Digital outputs / Limitation of inductive shutdown voltage to | L+ (-53 V) |
| Digital outputs / Controlling a digital input | Yes |
| Digital outputs / Switching capacity of the outputs / on lamp load, max. | 5 W |
| Digital outputs / Load resistance range / lower limit | 48 Ω |
| Digital outputs / Load resistance range / upper limit | 4 k Ω |
| Digital outputs / Output voltage / for signal "1", min. | L+ (-0.8 V) |
| Digital outputs / Output current / for signal "1" rated value | 0.5 A |
| Digital outputs / Output current / for signal "1" permissible range for 0 to 40 °C, min. | 5 mA |
| Digital outputs / Output current / for signal "1" permissible range for 0 to 40 °C, max. | 0.6 A |
| Digital outputs / Output current / for signal "1" permissible range for 40 to 60 °C, min. | 5 mA |
| Digital outputs / Output current / for signal "1" permissible range for 40 to 60 °C, max. | 0.6 A |
| Digital outputs / Output current / for signal "1" minimum load current | 5 mA |
| Digital outputs / Output current / for signal "0" residual current, max. | 0.5 mA |
| Digital outputs / Output delay with resistive load / "0" to "1", max. | 100 μs |
| Digital outputs / Output delay with resistive load / "1" to "0", max. | 500 μs |
| Digital outputs / Parallel switching of two outputs / for uprating | No |
| Digital outputs / Parallel switching of two outputs / for redundant control of a load | Yes |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz |
| with inductive load (acc. to IEC 60947-5-1, DC13), max. | 0.5 Hz |
| on lamp load, max. | 10 Hz |
| Total current of the outputs (per group) / horizontal installation / up to 40 °C, max. | 4 A |
| Total current of the outputs (per group) / horizontal installation / up to 60 °C, max. | 3 A |
| Total current of the outputs (per group) / vertical installation / up to 40 °C, max. | 2 A |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Interrupts/diagnostics/status information / Alarms | No |
| Interrupts/diagnostics/status information / Diagnostics function | No |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | No |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | No |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | No |
| Interrupts/diagnostics/status information / Diagnoses / Fuse blown | No |
| Interrupts/diagnostics/status information / Diagnoses / Missing load voltage | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Rated load voltage PWR (green) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Fuse OK FSG (green) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator digital output (green) | Yes |
| Potential separation / Potential separation digital outputs / between the channels | Yes |
| Potential separation / Potential separation digital outputs / between the channels, in groups of | 8 |
| Potential separation / Potential separation digital outputs / between the channels and backplane bus | Yes; Optocoupler |
| Isolation / Isolation tested with | 500 V DC |
| Connection method / required front connector | 20-pin |
| Dimensions / Chiều rộng | 40 mm |
| Dimensions / Chiều cao | 125 mm |
| Dimensions / Chiều sâu | 120 mm |
| Weights / Khối lượng xấp xỉ | 190 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
