Chưa cập nhật
品番: IFS203
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Cảm biến áp suất IFM PI2795. Number of inputs and outputs: Number of digital outputs: 2; Number of analog outputs: 1; Measuring range: -1...4 bar: -14.5...58 psi: -100...400 kPa.
品番
PI2795
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | PI2795 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Measuring range | -1...4 bar: -14.5...58 psi: -100...400 kPa |
| Process connection | threaded connection G 1 external thread with Aseptoflex Vario sealing contour |
| Note | G1 Gewinde nach ISO 228. Alternativ dichtend über rückwärtige Dichtkontur mit Dichtung in Anlehnung an DIN EN ISO 1179-2. |
| Special feature | gold-plated contacts |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25...125; (145 max. 1h) |
| Min. burst pressure | 100 bar: 1450 psi: 10000 kPa |
| Pressure rating | 30 bar: 435 psi: 3000 kPa |
| Vacuum resistance | -1000 mbar: -0.1 MPa |
| Type of pressure | relative pressure; vacuum |
| No dead space | yes |
| MAWP (for applications according to CRN) [bar] | 30 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Operating voltage [V] | 20...32 DC; 18...32 DC |
| Current consumption [mA] | 3.6...21; < 45 |
| Power-on delay time [s] | 1; 0.5 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20, invertible; (scalable) |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Max. load [Ω] | 300; (Ub - 10 V) / 20 mA |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 125 |
| Set point SP | -0.99...4 bar: -14.35...58 psi: -99...400 kPa |
| Reset point rP | -1...3.99 bar: -14.5...57.85 psi: -100...399 kPa |
| Analog start point | -1...3 bar: -14.5...43.5 psi: -100...300 kPa |
| Analog end point | 0...4 bar: 0...58 psi: 0...400 kPa |
| In steps of | 0.005 bar: 0.05 psi: 0.5 kPa |
| Factory setting | SP1 = 1.000 bar: rP1 = 0.920 bar; SP2 = 3.000 bar: rP2 = 2.920 bar; ASP = 0.000 bar: AEP = 4.000 bar; dAP = 0.06 s: dAA = 0.03 s |
| Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,05; (0...70 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0...70 °C) |
| Damping process value dAP [s] | 0...30 |
| Damping for the analog output dAA [s] | 0.01...99.99 |
| Step response time analog output [ms] | 45; 7 |
| Min. response time of switching output (dAP) [ms] | 3 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 2.3 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 158 |
| Ambient temperature [°C] | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67; IP 68; IP 69K |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated: 10 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-5 Surge: 0,5/1 kV; EN 61000-4-6 HF conducted: 10 V |
| Shock resistance | DIN IEC 68-2-27: 50 g (11 ms) |
| Vibration resistance | DIN IEC 68-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 160 |
| Note on approval | Factory certificate available as download at www.factory-certificate.ifm |
| Weight [g] | 358.5 |
| Housing | tubular |
| Dimensions [mm] | Ø 50 / L = 105.8 |
| Material | stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA |
| Materials (wetted parts) | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; PTFE |
| Min. pressure cycles | 100 million |
| Display | Display unit: LED, green; Switching status: LED, yellow; Function display: alphanumeric display, 4-digit; Measured values: alphanumeric display, 4-digit |
| Display unit | bar; psi; kPa; % of the span |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
品番: IFS203
品番: EVT406
品番: IG5526
品番: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
