Chưa cập nhật
品番: IFS203
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Cảm biến lưu lượng IFM SM0510. Number of inputs and outputs: Number of digital outputs: 2; Number of analog outputs: 1; Measuring range: 5...900 l/min: 0.3...54 m³/h.
品番
SM0510
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | SM0510 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Measuring range | 5...900 l/min: 0.3...54 m³/h |
| Process connection | threaded connection G 2 external thread DN50 flat seal |
| Special feature | gold-plated contacts |
| Application | Totalizer function; empty pipe detection; for industrial applications |
| Installation | connection to pipe by means of an adapter |
| Media | Conductive liquids; water; water-based media |
| Note on media | conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C) |
| Medium temperature [°C] | -10...90 |
| Pressure rating | 16 bar: 1.6 MPa |
| MAWP (for applications according to CRN) | 8.9 bar: 0.89 MPa |
| Operating voltage [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption [mA] | < 150 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 5 |
| Measuring principle | magnetic-inductive |
| Inputs | counter reset |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; pulse signal; frequency signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250; (per output) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable) |
| Max. load [Ω] | 500 |
| Analog voltage output [V] | 0...10; (scalable) |
| Min. load resistance [Ω] | 2000 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Frequency of the output [Hz] | 0.1...10000 |
| Display range | -920...920 l/min: -55.2...55.2 m³/h |
| Resolution | 1 l/min: 0.05 m³/h |
| Set point SP | 10...900 l/min: 0.55...54 m³/h |
| Reset point rP | 5...896 l/min: 0.3...53.75 m³/h |
| Analog start point ASP | 0...720 l/min: 0...43.2 m³/h |
| Analog end point AEP | 180...900 l/min: 10.8...54 m³/h |
| Low flow cut-off LFC | < 15 l/min: < 0.9 m³/h |
| In steps of | 1 l/min: 0.05 m³/h; 0.1 l |
| Measuring dynamics | 1:180 |
| Pulse value | 0.1 l...600 x 10³ m³ |
| Pulse length [s] | 0,003...2 |
| Measuring range [°C] | -20...80 |
| Display range [°C] | -40...100 |
| Resolution [°C] | 0.2 |
| Set point SP [°C] | -19.2...80 |
| Reset point rP [°C] | -19.6...79.6 |
| Analog start point [°C] | -20...60 |
| Analog end point [°C] | 0...80 |
| In steps of [°C] | 0.2 |
| Accuracy (in the measuring range) | ± (0,8 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2% MEW |
| Temperature drift | ± 0,0333 °C / K |
| Accuracy [K] | ± 1 (bei 25 °C, Q > 15 l/min) |
| Response time [s] | 0.35; (dAP = 0) |
| Delay time programmable dS, dr [s] | 0...50 |
| Damping process value dAP [s] | 0...5 |
| Dynamic response T05 / T09 [s] | T09 = 3 (Q > 15 l/min) |
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / closed; switching logic; current/voltage/frequency/pulse output; Start-up delay; display can be deactivated; Display unit; empty pipe detection |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 3 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 5 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 509 |
| Ambient temperature [°C] | -10...60 |
| Storage temperature [°C] | -25...80 |
| Protection | IP 65; IP 67 |
| EMC | DIN EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; DIN EN 61000-4-3 HF radiated: 10 V/m; DIN EN 61000-4-4 Burst: 2 kV; DIN EN 61000-4-5 Surge: 1 kV; DIN EN 61000-4-6 HF conducted: 10 V |
| CPA approval | model number: 004MI; accuracy class: -; maximum allowable error: ± 1,5 % FS; Q (min): 0,3 m³/h; Q (t): -; Q (max): 54 m³/h; Medium temperature: -10...70 °C |
| Shock resistance | DIN EN 60068-2-27: 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 85 |
| UL approval | UL approval number: I008; File number UL: E174189 |
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g] | 3212 |
| Housing | rectangular |
| Inlet pipe length | 3 x DN |
| Outlet pipe length | 1 x DN |
| Dimensions [mm] | 200 x 103 x 117 |
| Material | stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PC; FKM; PBT-GF20; TPE-U |
| Materials (wetted parts) | Pipe section: stainless steel (1.4404 / 316L); Process connection sealing: NBR fiber-reinforced Gasket; FKM; stainless steel (1.4571/316Ti ); PEEK |
| Display | Display unit: 6 x LED, green (l/min, m³/h, l, m³, 10³, °C); Switching status: 2 x LED, yellow; Measured values: alphanumeric display, 4-digit; Programming: alphanumeric display, 4-digit |
| Items supplied | sealings: 2, Centellen; Label |
| Remarks | MW = Measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
品番: IFS203
品番: EVT406
品番: IG5526
品番: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
