Chưa cập nhật
品番: IFS203
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Cảm biến nhiệt độ IFM LT3024. Number of inputs and outputs: Number of digital outputs: 1; Number of analog outputs: 1; Factory setting: mineral oils.
品番
LT3024
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | LT3024 |
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
| Factory setting | mineral oils |
| Probe length L [mm] | 728 |
| Media | hydrous coolants; oils; oil-based media; water; media similar to water |
| Dielectric constant of the medium | > 2 |
| Cannot be used for | extremely conductive media; adhering media; granulates; bulk material; acids; alkali |
| Tank pressure | 0.5; (when mounting with mounting accessories: E43001 - E43007, E43019) bar: 0.05; (when mounting with mounting accessories: E43001 - E43007, E43019) MPa |
| Medium temperature [°C] | 0...35; (with climate tube E43102 35...55 °C); 0...70; 0...35; (with climate tube E43102 35...55 °C) |
| Medium temperature short time [°C] | 0...90; (< 1 h) |
| Operating voltage [V] | 18...30 DC |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 3 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2.5 |
| Permanent current rating of switching output DC [mA] | 200 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20, invertible |
| Max. load [Ω] | 500 |
| Analog voltage output [V] | 0...10, invertible |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | thermal, pulsed |
| Overload protection | yes |
| Active range A [mm] | 585 |
| Inactive range I1 / I2 [mm] | 104 / 39 |
| Set point SP [mm] | 60...590 |
| Reset point rP [mm] | 50...580 |
| In steps of [mm] | 10 |
| Reference point OP [mm] | 200 - 240 - 280 - 310 - 350 - 390 - 420 - 460 - 500 - 530 - 570 - 610 - OFF |
| Hysteresis, OP [mm] | 4 |
| Measuring range [°C] | -20...90 |
| Set point SP [°C] | -19.5...90 |
| Reset point rP [°C] | -20...89.5 |
| In steps of [°C] | 0.5 |
| Resolution of switching output [K] | 0.5 |
| Measuring error [% of the final value] | ± 5 |
| Repeatability | ± 2 |
| Resolution [mm] | 5 |
| Zero signal (voltage) [V] | 0 |
| Zero signal (current) [mA] | 4.0 |
| Full signal (voltage) [V] | 10 |
| Full signal (current) [mA] | 20 |
| Switch point accuracy [K] | ± 1,5 |
| Resolution [K] | 0.5 |
| Dynamic response T09 [s] | 90 |
| Parameter setting options | hysteresis / window; normally open / closed; switching logic; current/voltage output; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 4 |
| Process data binary | 1 |
| Min. process cycle time [ms] | 4.5 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 648 |
| Ambient temperature [°C] | 0...60 |
| Storage temperature [°C] | -25...80 |
| Protection | IP 67 |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-4 |
| Shock resistance | DIN EN 60068-2-27: 15 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 222 |
| UL approval | UL approval number: H002 |
| Weight [g] | 556.3 |
| Dimensions [mm] | Ø 16 |
| Material | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV |
| Materials (wetted parts) | PP |
| Display | Display unit: 4 x LED, green (cm, inch, °C, °F); Switching status: 1 x LED, yellow; Measured values: alphanumeric display, 4-digit; Parameter setting: alphanumeric display, 4-digit |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |
品番: IFS203
品番: EVT406
品番: IG5526
品番: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
