Chưa cập nhật
品番: IFS203
- 単位
- Chưa cập nhật
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Công tắc áp suất IFM PP7552. Number of inputs and outputs: Number of digital outputs: 2; Measuring range: 0...100 bar: 0...1450 psi: 0...10 MPa.
品番
PP7552
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | PP7552 |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Measuring range | 0...100 bar: 0...1450 psi: 0...10 MPa |
| Process connection | threaded connection G 1/4 external thread Internal thread:M5 |
| Application | for mobile applications; for industrial applications; for railway applications |
| Media | liquids and gases |
| Conditionally suitable for | use in gases at pressures > 25 bar only on request |
| Medium temperature [°C] | -25...90 |
| Min. burst pressure | 650 bar: 9400 psi: 65 MPa |
| Pressure rating | 300 bar: 4350 psi: 30 MPa |
| Type of pressure | relative pressure |
| Operating voltage [V] | 9.6...36 DC; (communication mode: 18...32) |
| Current consumption [mA] | < 45 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.3 |
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 170 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Set point SP | 1...100 bar: 20...1450 psi: 0.1...10 MPa |
| Reset point rP | 0.5...99.5 bar: 10...1440 psi: 0.05...9.95 MPa |
| In steps of | 0.5 bar: 10 psi: 0.05 MPa |
| Factory setting | SP1 = 25.0 bar: rP1 = 23.0 bar; SP2 = 75.0 bar: rP2 = 73.0 bar; OUT1 = Hno: OUT2 = Hno |
| Switch point accuracy [% of the span] | < ± 0,5 |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Zero-point stabilization [% of the span] | Switching output, Display: 1,0; IO-Link: 1,0; (see operating instructions zero-point behavior) |
| Hysteresis deviation [% of the span] | < ± 0,1 |
| Long-term stability [% of the span] | < ± 0,1; (per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (0...80 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,2; (0...80 °C) |
| Response time [ms] | < 3 |
| Damping process value dAP in steps [s] | 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 2.3 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 4 |
| Ambient temperature [°C] | -25...85 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 68; (7 days / 1 m water depth / 0.1 bar) |
| EMC | noise immunity: EN 61000-6-2; EN 61000-4-2 ESD: 4 kV contact discharge / 15 kV air discharge; EN 61000-4-3 HF radiated: 20 V/m; EN 61000-4-4 Burst: 4 kV coupling clamp; EN 61000-4-5 Surge: 0,5 kV supply / 1 kV signal for DC units; EN 61000-4-6 HF conducted: 10 V; noise immunity: according to the automotive directive 1995/54/EC / 04/104EG / 05/83/EG; Absorber chamber test to ISO 11452-2:: 80 V/m |
| Shock resistance | DIN IEC 60068-2-27 / DIN IEC 60068-2-29: 1000 g; DIN EN 61373: Category 3 |
| Vibration resistance | DIN IEC 68-2-6: 20 g (10...2000 Hz); DIN EN 60068-2-64: 14 g; DIN EN 61373: Category 2 |
| MTTF [years] | 310 |
| UL approval | UL approval number: J009 |
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Railway applications | DIN EN 50155: Klasse T3, C1, S1 |
| Weight [g] | 228 |
| Housing | tubular |
| Dimensions [mm] | Ø 30 / L = 79.5 |
| Material | stainless steel (1.4301 / 304); FKM; EPDM/X; PA |
| Materials (wetted parts) | stainless steel (1.4305 / 303); ceramics; FKM |
| Min. pressure cycles | 100 million |
| Restrictor element integrated | no (can be retrofitted) |
| Display | Power: 2 x LED, green; Switching status: 2 x LED, yellow |
| Teach function | yes |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |
品番: IFS203
品番: EVT406
品番: IG5526
品番: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
