Name: Fiber Amplifier, M8 Connector Type, Main Unit, PNP FS-V33CP Keyence
Brand: KEYENCE
SKU: FS-V33CP

品番

単位

供給状況

必要数量

オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。

見積前に TESFA が確認すること

MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。

技術仕様

説明と用途

見積時の注意

技術仕様

コンテンツを読み込み中…

属性

製品仕様

Model

FS-V33CP

Nguồn chính hãng

https://www.keyence.com/products/sensor/fiber-optic/fs-v30/models/fs-v33cp/

Type

2-output with / M8 connector

Output

PNP

Main unit/Expansion unit

Main unit

Control output

2 outputs

Monitor output (1 to 5 V)

N/A

Connector

Light source LED

Red, 4-element LED (Wavelength: 640 nm)

Response time

33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)

Output selection

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and / Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, / Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations / Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

Size

30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)

Detection mode

Light intensity (area detection possible, automatic sensitivity-tracking function provided)/ / [Limited light intensity/Count check/Abnormality detection]

Timer function

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable / Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.

Control output

PNP open-collector 24 V, 100 mA max. *1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

External inputy

Input time: 2 ms (ON)/20 ms (OFF) min. *2

Unit expansion

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

Number of interference prevention units - Normal operation

HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台

Rating - Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Power consumption

Normal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/ / Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V, / 32 mA max.) *3

Environmental resistance - Ambient light

Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.

Ambient temperature

-10 to +55 °C 14 to 131 °F (No freezing) *4

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06" , 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s 2 , 3 times in each of the X, Y, and Z directions

Case material

Polycarbonate

Accessories

N/A

Weight

Approx. 22 g

見積前に TESFA が確認すること

技術仕様

見積前に TESFA が確認すること

技術仕様

Fiber Amplifier, M8 Connector Type, Main Unit, PNP FS-V33CP Keyence

関連製品

技術資料

見積前に TESFA が確認すること

技術仕様

見積前に TESFA が確認すること

技術仕様

Fiber Amplifier, M8 Connector Type, Main Unit, PNP FS-V33CP Keyence

製品詳細

関連製品

技術資料