Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module đếm SIEMENS 6ES7138-4DA04-0AB0. Supply voltage / Load voltage L+ / Rated value (DC): 24 V; Supply voltage / Load voltage L+ / permissible range, lower limit (DC): 20.4 V; Supply voltage / Load voltage L+ / permissible range, upper limit (DC): 28.8 V.
品番
6ES7138-4DA04-0AB0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7138-4DA04-0AB0 |
| Tên gọi chính hãng | *** Spare part *** SIMATIC DP, Electronics module for ET 200S, 1 count 24 V/100 kHz 15 mm installation width, operating modes: Count, Measure, (cycle duration measurement, high-resolution) with clock synchronization |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V |
| Supply voltage / Load voltage L+ / permissible range, lower limit (DC) | 20.4 V |
| Supply voltage / Load voltage L+ / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Load voltage L+ / Reverse polarity protection | Yes |
| Input current / from load voltage L+ (without load), max. | 42 mA |
| Input current / from backplane bus 3.3 V DC, max. | 10 mA |
| Encoder supply / 24 V encoder supply / 24 V | Yes; L+ (-0.8 V) |
| Encoder supply / 24 V encoder supply / Short-circuit protection | Yes |
| Encoder supply / 24 V encoder supply / Output current, max. | 500 mA |
| Power loss / Power loss, typ. | 1 W |
| Hardware configuration / Module exchange / Module exchange during operation of the IM-DP | Yes |
| Hardware configuration / Module exchange / Module exchange under process voltage | Yes |
| Digital inputs / Số ngõ vào số | 1 |
| Digital inputs / Functions | Gate control, synchronization, latch function |
| Digital inputs / Input characteristic curve in accordance with IEC 61131, type 2 | Yes |
| Digital inputs / Input voltage / Rated value (DC) | 24 V |
| Digital inputs / Input voltage / for signal "0" | -30 to +5 V |
| Digital inputs / Input voltage / for signal "1" | +11 to +30V |
| Digital inputs / Input current / for signal "0", max. (permissible quiescent current) | 2 mA |
| Digital inputs / Input current / for signal "1", typ. | 9 mA |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max. | 2.5 μs; Filter off: 2.5 μs (200 kHz), filter on: 25 μs (20 kHz) |
| Digital inputs / Cable length / shielded, max. | 100 m; Filter 20 kHz: 100 m, filter 200 kHz: 50 m |
| Digital outputs / Số ngõ ra số | 1 |
| Short-circuit protection | Yes |
| Response threshold, typ. | 2.6 A to 4 A |
| Limitation of inductive shutdown voltage to | L+ (-50 to -60 V) |
| Controlling a digital input | Yes |
| Switching capacity of the outputs / on lamp load, max. | 5 W |
| Output voltage / Rated value (DC) | 24 V |
| Output voltage / for signal "0", max. | 3 V |
| Output voltage / for signal "1", min. | L+ (-1 V) |
| Output current / for signal "1" permissible range for 0 to 40 °C, min. | 5 mA |
| Output current / for signal "1" permissible range for 0 to 40 °C, max. | 2 000 mA |
| Output current / for signal "1" permissible range for 0 to 60 °C, min. | 5 mA |
| Output current / for signal "1" permissible range for 0 to 60 °C, max. | 500 mA; 1 000 mA at 50 °C |
| Output current / for signal "0" residual current, max. | 0.5 mA |
| Output delay with resistive load / "0" to "1", max. | 100 μs |
| Switching frequency / with resistive load, max. | 100 Hz |
| Switching frequency / with inductive load, max. | 2 Hz |
| Switching frequency / on lamp load, max. | 10 Hz |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Encoder / Number of connectable encoders, max. | 1 |
| Encoder / Connectable encoders / Incremental encoder (asymmetrical) | Yes |
| Encoder / Connectable encoders / 24 V initiator | Yes |
| Encoder / Connectable encoders / 2-wire sensor | Yes |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Group error SF (red) | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator digital input (green) | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator digital output (green) | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator forward counting (green) | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator backward counting (green) | Yes |
| Measuring functions / Measuring range / Frequency measurement, min. | 0.1 Hz |
| Measuring functions / Measuring range / Frequency measurement, max. | 100 kHz |
| Measuring functions / Measuring range / Cycle duration measurement, min. | 10 μs |
| Measuring functions / Measuring range / Cycle duration measurement, max. | 120 s |
| Measuring functions / Measuring range / Speed measurement, min. | 1 1/min |
| Measuring functions / Measuring range / Speed measurement, max. | 25 000 1/min |
| Counter / Number of counter inputs | 1; 32 bit |
| Counter / Counter input 24 V / Minimum pulse width | 2.5 μs; Filter off: 2.5 μs (200 kHz), filter on: 25 μs (20 kHz) |
| Parameter / Remark | 16 byte |
| Potential separation / Potential separation digital inputs / Potential separation digital inputs | No; only opposite shielding |
| Potential separation / Potential separation counter / between the channels and backplane bus | Yes |
| Between the channels and load voltage L+ | No |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 81 mm |
| Dimensions / Chiều sâu | 52 mm |
| Weights / Khối lượng xấp xỉ | 40 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
