Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module đếm SIEMENS 6ES7138-6BA01-0BA0. General information / Tên kiểu sản phẩm: TM PosInput 1; General information / Firmware version: V2.0; General information / FW update possible: Yes.
品番
6ES7138-6BA01-0BA0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7138-6BA01-0BA0 |
| Tên gọi chính hãng | SIMATIC ET 200SP, TM Posinput 1 counter and position decoder module for RS-422 incremental encoder or SSI absolute encoder, 2 DI, 2 DQ suitable for BU type A0, pack quantity: 1 unit |
| General information / Tên kiểu sản phẩm | TM PosInput 1 |
| General information / Firmware version | V2.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0 |
| General information / Color code for module-specific color-coded label | CC00 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | Yes |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | STEP 7 V16 or higher |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.6 (use previous version *6BA00*) |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | GSD Revision 5 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.34 |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V |
| Supply voltage / Load voltage L+ / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / Load voltage L+ / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Load voltage L+ / Reverse polarity protection | Yes |
| Input current / Current consumption, max. | 75 mA; without load |
| Encoder supply / Number of outputs | 2 |
| Encoder supply / 5 V encoder supply / 5 V | Yes |
| Encoder supply / 5 V encoder supply / Short-circuit protection | Yes; electronic/thermal |
| Encoder supply / 5 V encoder supply / Output current, max. | 300 mA; Total current of all encoders |
| Encoder supply / 24 V encoder supply / 24 V | Yes; L+ (-0.8 V) |
| Encoder supply / 24 V encoder supply / Short-circuit protection | Yes; electronic/thermal |
| Encoder supply / 24 V encoder supply / Output current, max. | 300 mA; Total current of all encoders |
| Power loss / Power loss, typ. | 1.5 W |
| Address area / Address space per module / Inputs | 16 byte; 4 bytes in Fast mode |
| Outputs | 12 byte; 4 bytes for Motion Control, 0 bytes for Fast mode |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | type B |
| Digital inputs / Số ngõ vào số | 2 |
| Digital inputs / Digital inputs, parameterizable | Yes |
| Digital inputs / Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital inputs / Digital input functions, parameterizable / Gate start/stop | Yes; only for pulse and incremental encoders |
| Digital inputs / Digital input functions, parameterizable / Capture | Yes |
| Digital inputs / Digital input functions, parameterizable / Synchronization | Yes; only for pulse and incremental encoders |
| Digital inputs / Digital input functions, parameterizable / Freely usable digital input | Yes |
| Digital inputs / Input voltage / Rated value (DC) | 24 V |
| Digital inputs / Input voltage / for signal "0" | -5 ... +5 V |
| Digital inputs / Input voltage / for signal "1" | +11 to +30V |
| Digital inputs / Input voltage / permissible voltage at input, min. | -30 V; -5 V continuous, -30 V brief reverse polarity protection |
| Digital inputs / Input voltage / permissible voltage at input, max. | 30 V |
| Digital inputs / Input current / for signal "1", typ. | 2.5 mA |
| Input delay (for rated value of input voltage) / for standard inputs / parameterizable | Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms |
| Input delay (for rated value of input voltage) / for technological functions / parameterizable | Yes |
| Digital inputs / Cable length / shielded, max. | 1 000 m |
| Digital inputs / Cable length / unshielded, max. | 600 m |
| Digital outputs / Type of digital output | Transistor |
| Digital outputs / Số ngõ ra số | 2 |
| Digital outputs / Digital outputs, parameterizable | Yes |
| Digital outputs / Short-circuit protection | Yes; electronic/thermal |
| Digital outputs / Response threshold, typ. | 1 A |
| Digital outputs / Limitation of inductive shutdown voltage to | L+ (-53 V) |
| Digital outputs / Controlling a digital input | Yes |
| Digital outputs / Digital output functions, parameterizable / Switching tripped by comparison values | Yes |
| Digital outputs / Digital output functions, parameterizable / Freely usable digital output | Yes |
| Digital outputs / Switching capacity of the outputs / with resistive load, max. | 0.5 A; Per digital output |
| Digital outputs / Switching capacity of the outputs / on lamp load, max. | 5 W |
| Digital outputs / Load resistance range / lower limit | 48 Ω |
| Digital outputs / Load resistance range / upper limit | 12 k Ω |
| Digital outputs / Output voltage / for signal "1", min. | 23.2 V; L+ (-0.8 V) |
| Digital outputs / Output current / for signal "1" rated value | 0.5 A; Per digital output |
| Digital outputs / Output current / for signal "1" permissible range, max. | 0.6 A; Per digital output |
| Digital outputs / Output current / for signal "1" minimum load current | 2 mA |
| Digital outputs / Output current / for signal "0" residual current, max. | 0.5 mA |
| Digital outputs / Output delay with resistive load / "0" to "1", max. | 50 μs |
| Digital outputs / Output delay with resistive load / "1" to "0", max. | 50 μs |
| Digital outputs / Switching frequency / with resistive load, max. | 10 kHz |
| with inductive load, max. | 0.5 Hz; Acc. to IEC 60947-5-1, DC-13; observe derating curve |
| on lamp load, max. | 10 Hz |
| Total current of the outputs / Current per module, max. | 1 A |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Input voltage | RS 422 |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Input frequency, max. | 1 MHz |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Counting frequency, max. | 4 MHz; with quadruple evaluation |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Cable length, shielded, max. | 32 m; at 1 MHz |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Signal filter, parameterizable | Yes |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Incremental encoder with A/B tracks, 90° phase offset | Yes |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Incremental encoder with A/B tracks, 90° phase offset and zero track | Yes |
| Encoder / Encoder signals, incremental encoder (symmetrical) / pulse encoder | Yes |
| Encoder / Encoder signals, incremental encoder (symmetrical) / Pulse encoder with direction | Yes |
| Encoder / Encoder signals, incremental encoder (symmetrical) / pulse encoder with one impulse signal per count direction | Yes |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / Input voltage | 5 V TTL (push-pull encoders only) |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / Input frequency, max. | 1 MHz |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / Counting frequency, max. | 4 MHz; with quadruple evaluation |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / Signal filter, parameterizable | Yes |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / Incremental encoder with A/B tracks, 90° phase offset | Yes |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / Incremental encoder with A/B tracks, 90° phase offset and zero track | Yes |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / pulse encoder | Yes |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / pulse encoder with direction | Yes |
| Encoder / Encoder signals, incremental encoder (asymmetrical) / pulse encoder with one impulse signal per count direction | Yes |
| Encoder / Encoder signals, absolute encoder (SSI) / Input signal | to RS-422 |
| Encoder / Encoder signals, absolute encoder (SSI) / Telegram length, parameterizable | 10 ... 40 bit |
| Encoder / Encoder signals, absolute encoder (SSI) / Clock frequency, max. | 2 MHz; 125 kHz, 250 kHz, 500 kHz, 1 MHz, 1.5 MHz or 2 MHz |
| Encoder / Encoder signals, absolute encoder (SSI) / Binary code | Yes |
| Encoder / Encoder signals, absolute encoder (SSI) / Gray code | Yes |
| Encoder / Encoder signals, absolute encoder (SSI) / Cable length, shielded, max. | 320 m; Cable length, RS-422 SSI absolute encoders, Siemens type 6FX2001- 5, 24 V supply: 125 kHz, 320 meters shielded, max.; 250 kHz, 160 meters shielded, max.; 500 kHz, 60 meters shielded, max.; 1 MHz, 20 meters shielded, max. 1.5 MHz, 10 meters shielded, max.; 2 MHz, 8 meters shielded, max. |
| Encoder / Encoder signals, absolute encoder (SSI) / Parity bit, parameterizable | Yes |
| Encoder / Encoder signals, absolute encoder (SSI) / Monoflop time | 16, 32, 48, 64 μs & automatic |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
