Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ ra số SIEMENS 6ES7132-6BF01-0CA0. General information / Tên kiểu sản phẩm: DQ 8x24VDC/0,5A HF; General information / HW functional status: 01; General information / Firmware version: V1.0.
品番
6ES7132-6BF01-0CA0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7132-6BF01-0CA0 |
| Tên gọi chính hãng | SIMATIC ET 200SP, digital output module, DQ 8x24 V DC/0.5 A high feature, source output (PNP,sourcing output) packing unit: 1 unit, suitable for BU type A0, color code CC02, channel diagnostics for: short-circuit and wire break, supply voltage, channel fault LED |
| General information / Tên kiểu sản phẩm | DQ 8x24VDC/0,5A HF |
| General information / HW functional status | 01 |
| General information / Firmware version | V1.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0 |
| General information / Color code for module-specific color-coded label | CC02 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | Yes; 250 μs |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | as of TIA Portal V19 with HSP0428 / integrated as of TIA Portal V20 |
| General information / Engineering with / STEP 7 configurable/integrated from version | as of STEP 7 V5.5 SP3 with HSP0230 V11.0 / integrated as of STEP 7 V5.7 SP3 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.43 |
| General information / Operating mode / DQ | Yes |
| General information / Operating mode / DQ with energy-saving function | No |
| General information / Operating mode / PWM | No |
| General information / Operating mode / Oversampling | No |
| General information / Operating mode / MSO | Yes |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Input current / Current consumption, max. | 20 mA; without load |
| Output voltage / Rated value (DC) | 24 V |
| Power loss / Power loss, typ. | 1 W |
| Address area / Address space per module / Address space per module, max. | 8 byte; 2 channels per submodule + QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Type of mechanical coding element | Type A |
| Submodules / Number of configurable submodules, max. | 4 |
| Selection of BaseUnit for connection variants / 1-wire connection | BU type A0 |
| Selection of BaseUnit for connection variants / 2-wire connection | BU type A0 |
| Selection of BaseUnit for connection variants / 3-wire connection | BU type A0 with AUX terminals or potential distributor module |
| Digital outputs / Type of digital output | Source output (PNP, current-sourcing) |
| Digital outputs / Số ngõ ra số | 8 |
| Digital outputs / Current-sinking | No |
| Digital outputs / Current-sourcing | Yes |
| Digital outputs / Digital outputs, parameterizable | Yes |
| Digital outputs / output type acc. to IEC 61131, type 0.5 | Yes |
| Digital outputs / Short-circuit protection | Yes; Electronic |
| Digital outputs / Response threshold, typ. | 0.7 to 1.3 A |
| Digital outputs / Open-circuit detection | Yes |
| Digital outputs / Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
| Digital outputs / Controlling a digital input | Yes |
| Digital outputs / Switching capacity of the outputs / with resistive load, max. | 0.5 A |
| Digital outputs / Switching capacity of the outputs / with inductive load, max. | 0.5 A |
| Digital outputs / Switching capacity of the outputs / on lamp load, max. | 5 W |
| Digital outputs / Load resistance range / lower limit | 48 Ω |
| Digital outputs / Load resistance range / upper limit | 12 k Ω |
| Digital outputs / Output current / for signal "1" rated value | 0.5 A |
| Digital outputs / Output current / for signal "1" permissible range, max. | 0.5 A |
| Digital outputs / Output current / for signal "0" residual current, max. | 0.1 mA |
| Digital outputs / Output delay with resistive load / "0" to "1", typ. | 50 μs |
| Digital outputs / Output delay with resistive load / "1" to "0", typ. | 100 μs |
| Digital outputs / Parallel switching of two outputs / for uprating | No |
| Digital outputs / Parallel switching of two outputs / for redundant control of a load | Yes |
| Digital outputs / Switching frequency / with resistive load, max. | 100 Hz |
| Digital outputs / Switching frequency / with inductive load, max. | 0.1 Hz; higher frequencies are possible, see Equipment Manual "Maximum permitted switching frequency of inductive loads" |
| Digital outputs / Switching frequency / on lamp load, max. | 10 Hz |
| Digital outputs / Total current of the outputs / Current per channel, max. | 0.5 A |
| Digital outputs / Total current of the outputs / Current per module, max. | 4 A |
| Total current of the outputs (per module) / horizontal installation / up to 60 °C, max. | 4 A |
| Total current of the outputs (per module) / vertical installation / up to 50 °C, max. | 4 A |
| Digital outputs / Cable length / shielded, max. | 1 000 m |
| Digital outputs / Cable length / unshielded, max. | 600 m |
| Isochronous mode / Execution and activation time (TCO), min. | 48 μs |
| Isochronous mode / Bus cycle time (TDP), min. | 500 μs |
| Isochronous mode / Jitter, max. | 8 μs |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Substitute values connectable | Yes |
| Alarms / Diagnostic alarm | Yes |
| Diagnoses / Monitoring the supply voltage | Yes |
| Diagnoses / parameterizable | Yes |
| Diagnoses / Wire break | Yes; channel by channel |
| Diagnoses / Short-circuit to ground | Yes; channel by channel |
| Diagnoses / Short-circuit to L+ | Yes; channel by channel |
| Diagnoses / Group error | Yes |
| Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Diagnostics indication LED / Channel status display | Yes; green LED |
| Diagnostics indication LED / for channel diagnostics | Yes; red LED |
| Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Potential separation / Potential separation channels / Between the channels and load voltage L+ | No |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | -30 °C |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | -30 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 50 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 73 mm |
| Dimensions / Chiều sâu | 58 mm |
| Weights / Khối lượng xấp xỉ | 30 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
