Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ ra số SIEMENS 6ES7522-1BH01-0AB0. General information / Tên kiểu sản phẩm: DQ 16x24VDC/0.5A HF; General information / HW functional status: FS02; General information / Firmware version: V1.1.0.
品番
6ES7522-1BH01-0AB0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7522-1BH01-0AB0 |
| Tên gọi chính hãng | SIMATIC S7-1500/ET 200MP, digital output module, DQ 16x24 V DC/0.5 A HF (35 mm); sourcing output; 16 channels in groups of 8; 4 A per group (0.5 A per channel); single-channel diagnostics; substitute value; operating cycles counter for connected actuators; safety-oriented switching off of load groups up to SIL 2 according to EN IEC 62061:2021 and category 3/PL d according to EN ISO 13849-1:2015; including U-connector (without front connector) |
| General information / Tên kiểu sản phẩm | DQ 16x24VDC/0.5A HF |
| General information / HW functional status | FS02 |
| General information / Firmware version | V1.1.0 |
| General information / FW update possible | Yes |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | Yes |
| General information / Product function / Prioritized startup | Yes |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V13 SP1 / - |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | V2.3 / - |
| General information / Operating mode / DQ | Yes |
| General information / Operating mode / DQ with energy-saving function | No |
| General information / Operating mode / PWM | No |
| General information / Operating mode / Cam control (switching at comparison values) | No |
| General information / Operating mode / Oversampling | No |
| General information / Operating mode / MSO | Yes |
| General information / Operating mode / Integrated operating cycle counter | Yes |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 20.4 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes; through internal protection with 7 A per group |
| Input current / Current consumption, max. | 30 mA |
| Output voltage / Rated value (DC) | 24 V |
| Power / Power consumption from the backplane bus | 1.1 W |
| Power loss / Power loss, typ. | 2 W |
| Digital outputs / Type of digital output | Transistor |
| Số ngõ ra số | 16 |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes; Clocked electronically |
| Response threshold, typ. | 1 A |
| Limitation of inductive shutdown voltage to | L+ (-53 V) |
| Controlling a digital input | Yes |
| Switching capacity of the outputs / with resistive load, max. | 0.5 A |
| Switching capacity of the outputs / on lamp load, max. | 5 W |
| Load resistance range / lower limit | 48 Ω |
| Load resistance range / upper limit | 12 k Ω |
| Output voltage / for signal "1", min. | L+ (-0.8 V) |
| Output current / for signal "1" rated value | 0.5 A |
| Output current / for signal "1" permissible range, max. | 0.5 A |
| Output current / for signal "0" residual current, max. | 0.5 mA |
| Output delay with resistive load / "0" to "1", max. | 100 μs |
| Output delay with resistive load / "1" to "0", max. | 500 μs |
| Parallel switching of two outputs / for logic links | Yes |
| Parallel switching of two outputs / for uprating | No |
| Parallel switching of two outputs / for redundant control of a load | Yes |
| Switching frequency / with resistive load, max. | 100 Hz |
| Switching frequency / with inductive load, max. | 0.5 Hz; According to IEC 60947-5-1, DC-13 |
| Switching frequency / on lamp load, max. | 10 Hz |
| Total current of the outputs / Current per channel, max. | 0.5 A; see additional description in the manual |
| Total current of the outputs / Current per group, max. | 4 A; see additional description in the manual |
| Total current of the outputs / Current per module, max. | 8 A; see additional description in the manual |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Isochronous mode / Execution and activation time (TCO), min. | 70 μs |
| Isochronous mode / Bus cycle time (TDP), min. | 250 μs |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Substitute values connectable | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Maintenance interrupt | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / RUN LED | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / ERROR LED | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / MAINT LED | Yes; Yellow LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; red LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels, in groups of | 8 |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Security / signed firmware update | No |
| Security / data integrity | No |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 60 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions / Chiều rộng | 35 mm |
| Dimensions / Chiều cao | 147 mm |
| Dimensions / Chiều sâu | 129 mm |
| Weights / Khối lượng xấp xỉ | 230 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
