Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ ra tương tự SIEMENS 6ES7135-4GB01-0AB0. General information / Product function / Isochronous mode: No; Supply voltage / Load voltage L+ / Rated value (DC): 24 V; From power module; Supply voltage / Load voltage L+ / Reverse polarity protection: Yes.
品番
6ES7135-4GB01-0AB0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7135-4GB01-0AB0 |
| Tên gọi chính hãng | *** Spare part *** SIMATIC DP, Electronics module for ET 200S, 2 AO I 15 mm width, +/-20mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED (group fault) |
| General information / Product function / Isochronous mode | No |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V; From power module |
| Supply voltage / Load voltage L+ / Reverse polarity protection | Yes |
| Input current / from load voltage L+ (without load), max. | 150 mA |
| Input current / from backplane bus 3.3 V DC, max. | 10 mA |
| Address area / Address space per module / Address space per module, max. | 4 byte |
| Analog outputs / Số ngõ ra tương tự | 2 |
| Analog outputs / Current output, no-load voltage, max. | 18 V |
| Analog outputs / Cycle time (all channels) max. | 1.5 ms |
| Analog outputs / Output ranges, current / -20 mA to +20 mA | Yes |
| Analog outputs / Output ranges, current / 4 mA to 20 mA | Yes |
| Analog outputs / Connection of actuators / for current output two-wire connection | Yes |
| Analog outputs / Connection of actuators / for current output four-wire connection | No |
| Analog outputs / Load impedance (in rated range of output) / with current outputs, max. | 500 Ω |
| Analog outputs / Load impedance (in rated range of output) / with current outputs, inductive load, max. | 1 mH |
| Analog outputs / Destruction limits against externally applied voltages and currents / Voltages at the outputs towards MANA | 15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20) |
| Analog outputs / Destruction limits against externally applied voltages and currents / Current, max. | 50 mA; DC |
| Analog outputs / Cable length / shielded, max. | 200 m |
| Analog value generation for the outputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 14 bit; 4 to 20 mA: 13 bit, ±20 mA: 14 bit |
| Analog value generation for the outputs / Settling time / for resistive load | 0.1 ms |
| Analog value generation for the outputs / Settling time / for capacitive load | 0.5 ms |
| Analog value generation for the outputs / Settling time / for inductive load | 0.5 ms |
| Operational error limit in overall temperature range / Current, relative to output range, (+/-) | 0.5 % |
| Basic error limit (operational limit at 25 °C) / Current, relative to output range, (+/-) | 0.3 % |
| Interrupts/diagnostics/status information / Substitute values connectable | Yes; 0 to 65535 (range of values must be within the rated range) |
| Interrupts/diagnostics/status information / Diagnoses / Diagnostic information readable | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Group error SF (red) | Yes |
| Potential separation / Potential separation analog outputs / between the channels | No |
| Potential separation / Potential separation analog outputs / between the channels and backplane bus | Yes |
| Potential separation / Potential separation analog outputs / Between the channels and load voltage L+ | Yes |
| Isolation / Isolation tested with | 500 V DC |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 81 mm |
| Dimensions / Chiều sâu | 52 mm |
| Weights / Khối lượng xấp xỉ | 40 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
