Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ vào tương tự SIEMENS 6ES7134-4JB51-0AB0. General information / Product function / Isochronous mode: No; Supply voltage / Load voltage L+ / Rated value (DC): 24 V; From power module; Supply voltage / Load voltage L+ / Reverse polarity protection: Yes.
品番
6ES7134-4JB51-0AB0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7134-4JB51-0AB0 |
| Tên gọi chính hãng | *** Spare part *** SIMATIC DP, Electronics module for ET 200S, 2/4 AI RTD Standard, 15 mm width, 15 bit+sign Pt100 STD; Pt100 KL; NI100 STD; NI100 KL; 150 ohm; 300 ohm; 600 ohm; Cycle time 110 ms/channel with SF LED (group fault) |
| General information / Product function / Isochronous mode | No |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V; From power module |
| Supply voltage / Load voltage L+ / Reverse polarity protection | Yes |
| Input current / from load voltage L+ (without load), max. | 30 mA |
| Input current / from backplane bus 3.3 V DC, max. | 10 mA |
| Output voltage / Power supply to the transmitters / present | Yes |
| Output voltage / Power supply to the transmitters / short-circuit proof | Yes |
| Power loss / Power loss, typ. | 0.6 W |
| Address area / Address space per module / Address space per module, max. | 8 byte |
| Analog inputs / Số ngõ vào tương tự | 4; 2 for 3 or 4-wire connection |
| Analog inputs / permissible input voltage for voltage input (destruction limit), max. | 9 V |
| Analog inputs / Constant measurement current for resistance-type transmitter, typ. | 1.67 mA |
| Analog inputs / Cycle time (all channels) max. | Number of active channels per module x basic conversion time |
| Analog inputs / Technical unit for temperature measurement adjustable | No |
| Analog inputs / Input ranges (rated values), resistance thermometer / Ni 100 | Yes; Standard/climate |
| Analog inputs / Input ranges (rated values), resistance thermometer / Input resistance (Ni 100) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistance thermometer / Pt 100 | Yes; Standard/climate |
| Analog inputs / Input ranges (rated values), resistance thermometer / Input resistance (Pt 100) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistors / 0 to 150 ohms | Yes |
| Analog inputs / Input ranges (rated values), resistors / Input resistance (0 to 150 ohms) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistors / 0 to 300 ohms | Yes |
| Analog inputs / Input ranges (rated values), resistors / Input resistance (0 to 300 ohms) | 2 000 k Ω |
| Analog inputs / Input ranges (rated values), resistors / 0 to 600 ohms | Yes |
| Analog inputs / Input ranges (rated values), resistors / Input resistance (0 to 600 ohms) | 2 000 k Ω |
| Characteristic linearization / Parameterizable | Yes; for Pt100, Ni100 |
| Characteristic linearization / for resistance thermometer | Pt100 (standard, climatic range), Ni100 (standard, climatic range) |
| Cable length / shielded, max. | 200 m |
| Analog value generation for the inputs / Measurement principle | integrating |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 16 bit; 150 ohms: 14 bit; 300, 600 ohms: 15 bit, Pt100, Ni100: 16 bit |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizable | Yes |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time (ms) | 16,7 / 20 ms |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Interference voltage suppression for interference frequency f1 in Hz | 50 / 60 Hz |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Conversion time (per channel) | 66 / 80 ms; additional conversion time for diagnostic wire break test |
| Analog value generation for the inputs / Smoothing of measured values / parameterizable | Yes; In four stages by means of digital filtering |
| Analog value generation for the inputs / Smoothing of measured values / Step: None | Yes; 1x cycle time |
| Analog value generation for the inputs / Smoothing of measured values / Step: low | Yes; 4x cycle time |
| Analog value generation for the inputs / Smoothing of measured values / Step: Medium | Yes; 32x cycle time |
| Analog value generation for the inputs / Smoothing of measured values / Step: High | Yes; 64x cycle time |
| Encoder / Connection of signal encoders / for resistance measurement with two-wire connection | Yes |
| Encoder / Connection of signal encoders / for resistance measurement with three-wire connection | Yes |
| Encoder / Connection of signal encoders / for resistance measurement with four-wire connection | Yes |
| Errors/accuracies / Operational error limit in overall temperature range / Resistance thermometer, relative to input range, (+/-) | 0.6 % |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Resistance thermometer, relative to input range, (+/-) | 0.4 % |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Group error SF (red) | Yes |
| Potential separation / Potential separation analog inputs / between the channels | No |
| Potential separation / Potential separation analog inputs / between the channels and backplane bus | Yes |
| Potential separation / Potential separation analog inputs / Between the channels and load voltage L+ | Yes |
| Isolation / Isolation tested with | 500 V DC |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 81 mm |
| Dimensions / Chiều sâu | 52 mm |
| Weights / Khối lượng xấp xỉ | 40 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
