Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ vào tương tự SIEMENS 6ES7134-6FB00-0BA1. General information / Tên kiểu sản phẩm: AI 2xU ST; General information / HW functional status: FS22 or higher; General information / Firmware version: V2.0.0.
品番
6ES7134-6FB00-0BA1
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7134-6FB00-0BA1 |
| Tên gọi chính hãng | SIMATIC ET 200SP, Analog input module, AI 2xU Standard Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit |
| General information / Tên kiểu sản phẩm | AI 2xU ST |
| General information / HW functional status | FS22 or higher |
| General information / Firmware version | V2.0.0 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0, A1 |
| General information / Color code for module-specific color-coded label | CC00 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Product function / Measuring range scalable | No |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V21 HSP0493 / integrated as of V21.1 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.7 SP3 HF3 with HSP0348 V2.0 / integrated as of V5.8 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.45 |
| General information / Operating mode / Oversampling | No |
| General information / Operating mode / MSI | No |
| CiR - Configuration in RUN / Reparameterization possible in RUN | Yes |
| CiR - Configuration in RUN / Calibration possible in RUN | No |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Input current / Current consumption (rated value) | 33.5 mA |
| Input current / Current consumption, max. | 37 mA |
| Encoder supply / 24 V encoder supply / 24 V | No |
| Encoder supply / Additional 24 V encoder supply / 24 V | No |
| Power loss, typ. | 0.9 W |
| Address area / Address space per module / Address space per module, max. | 4 byte; + 1 byte for QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | Type A |
| Hardware configuration / Selection of BaseUnit for connection variants / 1-wire connection | BU type A0, A1 |
| Hardware configuration / Selection of BaseUnit for connection variants / 2-wire connection | BU type A0, A1 |
| Analog inputs / Số ngõ vào tương tự | 2 |
| Analog inputs / For voltage measurement | 2 |
| Analog inputs / permissible input voltage for voltage input (destruction limit), max. | 30 V |
| Analog inputs / Cycle time (all channels), min. | 500 μs |
| Analog inputs / Input ranges (rated values), voltages / 0 to +10 V | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (0 to 10 V) | 180 k Ω |
| Analog inputs / Input ranges (rated values), voltages / 1 V to 5 V | Yes; 15 bit |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (1 V to 5 V) | 180 k Ω |
| Analog inputs / Input ranges (rated values), voltages / -10 V to +10 V | Yes; 16 bit incl. sign |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (-10 V to +10 V) | 180 k Ω |
| Analog inputs / Input ranges (rated values), voltages / -5 V to +5 V | Yes; 16 bit incl. sign |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (-5 V to +5 V) | 180 k Ω |
| Analog inputs / Cable length / shielded, max. | 200 m |
| Analog value generation for the inputs / Measurement principle | Sigma Delta |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 16 bit |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizable | Yes |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 Hz / off |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Conversion time (per channel) | 50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 250 μs without filter |
| Analog value generation for the inputs / Smoothing of measured values / Number of smoothing levels | 4 |
| Analog value generation for the inputs / Smoothing of measured values / parameterizable | Yes |
| Analog value generation for the inputs / Smoothing of measured values / Step: None | Yes; 1x conversion time |
| Analog value generation for the inputs / Smoothing of measured values / Step: low | Yes; 4x smoothing |
| Analog value generation for the inputs / Smoothing of measured values / Step: Medium | Yes; 8x smoothing |
| Analog value generation for the inputs / Smoothing of measured values / Step: High | Yes; 16x smoothing |
| Encoder / Connection of signal encoders / for voltage measurement | Yes |
| Errors/accuracies / Linearity error (relative to input range), (+/-) | 0.01 % |
| Errors/accuracies / Temperature error (relative to input range), (+/-) | 0.005 %/K |
| Errors/accuracies / Crosstalk between the inputs, min. | -50 dB |
| Errors/accuracies / Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
| Errors/accuracies / Operational error limit in overall temperature range / Voltage, relative to input range, (+/-) | 0.5 % |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Voltage, relative to input range, (+/-) | 0.3 % |
| Errors/accuracies / Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency / Series mode interference (peak value of interference < rated value of input range), min. | 70 dB |
| Errors/accuracies / Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency / Common mode voltage, max. | 10 V |
| Common mode interference, min. | 90 dB |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Limit value alarm | No |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | No |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | Yes; at 1 to 5 V |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow | Yes; module-wise |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Potential separation / Potential separation channels / between the channels and the power supply of the electronics | Yes |
| Permissible potential difference / between the inputs (UCM) | 10 Vpp |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Security / signed firmware update | Yes; firmware V2.0.0 or higher |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | -30 °C; < 0 °C as of FS04 |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | -30 °C; < 0 °C as of FS04 |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 50 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual |
| Ambient conditions / Absolute humidity / dew point, min. | -60 °C; suitable for dry room applications |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 73 mm |
| Dimensions / Chiều sâu | 58 mm |
| Weights / Khối lượng xấp xỉ | 31 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
