Đo áp suất
品番: QPL25.050
- 単位
- Cái
コンテンツを読み込み中…
コンテンツを読み込み中…
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
Module ngõ vào tương tự SIEMENS 6ES7431-1KF20-0AB0. Supply voltage / Load voltage L+ / Rated value (DC): 24 V; Only required for supplying 2-wire transmitters; Supply voltage / Load voltage L+ / Reverse polarity protection: Yes; Input current / from load voltage L+ (without load), max.: 200 mA; for 8 connected, fully controlled 2-wire transmitters.
品番
6ES7431-1KF20-0AB0
単位
Chưa cập nhật
供給状況
見積はお問い合わせください
必要数量 (Chưa cập nhật)
オンライン決済は不要です。TESFA が品番、数量、供給条件を確認し、ご入力の連絡先へ見積を回答します。
MRO 品では、画像だけで選ぶより正しいコード確認が重要です。TESFA は見積確定前に主要な技術項目を確認します。
| 属性 | 製品仕様 |
|---|---|
| Mã sản phẩm | 6ES7431-1KF20-0AB0 |
| Tên gọi chính hãng | SIMATIC S7-400, analog input SM 431, isolated 8 AI, resolution 14 bit, U/IResistor 8 AI, cycle time 0.416 ms |
| Supply voltage / Load voltage L+ / Rated value (DC) | 24 V; Only required for supplying 2-wire transmitters |
| Supply voltage / Load voltage L+ / Reverse polarity protection | Yes |
| Input current / from load voltage L+ (without load), max. | 200 mA; for 8 connected, fully controlled 2-wire transmitters |
| Input current / from backplane bus 5 V DC, max. | 1 000 mA |
| Power loss / Power loss, typ. | 4.9 W |
| Analog inputs / Số ngõ vào tương tự | 8 |
| Analog inputs / For voltage/current measurement | 8 |
| Analog inputs / For resistance measurement | 4 |
| Analog inputs / permissible input voltage for voltage input (destruction limit), max. | 18 V; 18 V continuous, 75 V for 1 ms (mark to space ratio 1:20) |
| Analog inputs / permissible input current for current input (destruction limit), max. | 40 mA; Permanent |
| Analog inputs / Constant measurement current for resistance-type transmitter, typ. | 1.67 mA |
| Analog inputs / Input ranges / Voltage | Yes |
| Analog inputs / Input ranges / Current | Yes |
| Analog inputs / Input ranges / Thermocouple | No |
| Analog inputs / Input ranges / Resistance thermometer | No |
| Analog inputs / Input ranges / Resistance | Yes |
| Analog inputs / Input ranges (rated values), voltages / 1 V to 5 V | Yes |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (1 V to 5 V) | 10 M Ω |
| Analog inputs / Input ranges (rated values), voltages / -1 V to +1 V | Yes |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (-1 V to +1 V) | 10 M Ω |
| Analog inputs / Input ranges (rated values), voltages / -10 V to +10 V | Yes |
| Analog inputs / Input ranges (rated values), voltages / Input resistance (-10 V to +10 V) | 100 k Ω |
| Analog inputs / Input ranges (rated values), currents / -20 mA to +20 mA | Yes |
| Analog inputs / Input ranges (rated values), currents / Input resistance (-20 mA to +20 mA) | 50 Ω |
| Analog inputs / Input ranges (rated values), currents / 4 mA to 20 mA | Yes |
| Analog inputs / Input ranges (rated values), currents / Input resistance (4 mA to 20 mA) | 50 k Ω |
| Analog inputs / Input ranges (rated values), resistors / 0 to 600 ohms | Yes |
| Cable length / shielded, max. | 200 m |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 14 bit; 14 / 14 / 14 |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizable | Yes |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Basic conversion time (ms) | 52 μs |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Interference voltage suppression for interference frequency f1 in Hz | none / 400 / 60 / 50 Hz |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Time constant of the input filter | 15 μs |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Basic execution time of the module (all channels released) | 0.42 ms |
| Encoder / Connection of signal encoders / for voltage measurement | Yes; possible |
| Encoder / Connection of signal encoders / for current measurement as 2-wire transducer | Yes |
| Encoder / Connection of signal encoders / for current measurement as 4-wire transducer | Yes |
| Encoder / Connection of signal encoders / for resistance measurement with two-wire connection | Yes; Line resistances are also measured |
| Encoder / Connection of signal encoders / for resistance measurement with three-wire connection | Yes; Line resistances are also measured |
| Encoder / Connection of signal encoders / for resistance measurement with four-wire connection | Yes |
| Errors/accuracies / Temperature error (relative to input range), (+/-) | 0.03 %/K |
| Errors/accuracies / Operational error limit in overall temperature range / Voltage, relative to input range, (+/-) | 0.7 %; ±0.7 % at ±1 V; ±0.9 % at ±10 V, 1 to 5 V |
| Errors/accuracies / Operational error limit in overall temperature range / Current, relative to input range, (+/-) | 0.8 %; at ±20 mA, 4 to 20 mA |
| Errors/accuracies / Operational error limit in overall temperature range / Resistance, relative to input range, (+/-) | 1 % |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Voltage, relative to input range, (+/-) | 0.6 %; 0.6 % at ±1 V; 0.75 % at ±10 V, 1 to 5 V |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Current, relative to input range, (+/-) | 0.7 %; at ±20 mA, 4 to 20 mA |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Resistance, relative to input range, (+/-) | 0.7 %; 0 to 600 ohms |
| Interrupts/diagnostics/status information / Diagnostics function | No |
| Potential separation / Potential separation analog inputs / Potential separation analog inputs | Yes; internal/external |
| Potential separation / Potential separation analog inputs / between the channels | No |
| Potential separation / Potential separation analog inputs / between the channels and backplane bus | Yes |
| Potential separation / Potential separation analog inputs / Between the channels and load voltage L+ | Yes |
| Isolation / Isolation tested with | 2 120 V DC between bus and analog section; 500 V DC between bus and local ground; 500 V DC between analog part and L+/M; 2 120 V DC between analog part and local ground; 2 120 V DC between L+/M and local ground |
| Dimensions / Chiều rộng | 25 mm |
| Dimensions / Chiều cao | 290 mm |
| Dimensions / Chiều sâu | 210 mm |
| Weights / Khối lượng xấp xỉ | 500 g |
品番: QPL25.050
品番: QPL25.500B
品番: SQM45.295B9
品番: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
