Chưa cập nhật
รหัสสินค้า: IFS203
- หน่วย
- Chưa cập nhật
กำลังโหลดเนื้อหา…
กำลังโหลดเนื้อหา…
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
Công tắc áp suất IFM PP7552. Number of inputs and outputs: Number of digital outputs: 2; Measuring range: 0...100 bar: 0...1450 psi: 0...10 MPa.
รหัสสินค้า
PP7552
หน่วย
Chưa cập nhật
สถานะการจัดหา
ติดต่อเพื่อขอราคา
จำนวนที่ต้องการ (Chưa cập nhật)
ไม่ต้องชำระเงินออนไลน์ TESFA จะตรวจสอบรหัสสินค้า จำนวน และเงื่อนไขการจัดหา แล้วตอบกลับใบเสนอราคาตามข้อมูลติดต่อของคุณ
สำหรับสินค้า MRO การยืนยันรหัสที่ถูกต้องสำคัญกว่าการเลือกจากรูปภาพ TESFA จะตรวจสอบจุดทางเทคนิคหลักก่อนยืนยันใบเสนอราคา
| คุณสมบัติ | ข้อมูลจำเพาะสินค้า |
|---|---|
| Mã sản phẩm | PP7552 |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Measuring range | 0...100 bar: 0...1450 psi: 0...10 MPa |
| Process connection | threaded connection G 1/4 external thread Internal thread:M5 |
| Application | for mobile applications; for industrial applications; for railway applications |
| Media | liquids and gases |
| Conditionally suitable for | use in gases at pressures > 25 bar only on request |
| Medium temperature [°C] | -25...90 |
| Min. burst pressure | 650 bar: 9400 psi: 65 MPa |
| Pressure rating | 300 bar: 4350 psi: 30 MPa |
| Type of pressure | relative pressure |
| Operating voltage [V] | 9.6...36 DC; (communication mode: 18...32) |
| Current consumption [mA] | < 45 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.3 |
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 170 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Set point SP | 1...100 bar: 20...1450 psi: 0.1...10 MPa |
| Reset point rP | 0.5...99.5 bar: 10...1440 psi: 0.05...9.95 MPa |
| In steps of | 0.5 bar: 10 psi: 0.05 MPa |
| Factory setting | SP1 = 25.0 bar: rP1 = 23.0 bar; SP2 = 75.0 bar: rP2 = 73.0 bar; OUT1 = Hno: OUT2 = Hno |
| Switch point accuracy [% of the span] | < ± 0,5 |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Zero-point stabilization [% of the span] | Switching output, Display: 1,0; IO-Link: 1,0; (see operating instructions zero-point behavior) |
| Hysteresis deviation [% of the span] | < ± 0,1 |
| Long-term stability [% of the span] | < ± 0,1; (per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (0...80 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,2; (0...80 °C) |
| Response time [ms] | < 3 |
| Damping process value dAP in steps [s] | 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 2.3 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 4 |
| Ambient temperature [°C] | -25...85 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 68; (7 days / 1 m water depth / 0.1 bar) |
| EMC | noise immunity: EN 61000-6-2; EN 61000-4-2 ESD: 4 kV contact discharge / 15 kV air discharge; EN 61000-4-3 HF radiated: 20 V/m; EN 61000-4-4 Burst: 4 kV coupling clamp; EN 61000-4-5 Surge: 0,5 kV supply / 1 kV signal for DC units; EN 61000-4-6 HF conducted: 10 V; noise immunity: according to the automotive directive 1995/54/EC / 04/104EG / 05/83/EG; Absorber chamber test to ISO 11452-2:: 80 V/m |
| Shock resistance | DIN IEC 60068-2-27 / DIN IEC 60068-2-29: 1000 g; DIN EN 61373: Category 3 |
| Vibration resistance | DIN IEC 68-2-6: 20 g (10...2000 Hz); DIN EN 60068-2-64: 14 g; DIN EN 61373: Category 2 |
| MTTF [years] | 310 |
| UL approval | UL approval number: J009 |
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Railway applications | DIN EN 50155: Klasse T3, C1, S1 |
| Weight [g] | 228 |
| Housing | tubular |
| Dimensions [mm] | Ø 30 / L = 79.5 |
| Material | stainless steel (1.4301 / 304); FKM; EPDM/X; PA |
| Materials (wetted parts) | stainless steel (1.4305 / 303); ceramics; FKM |
| Min. pressure cycles | 100 million |
| Restrictor element integrated | no (can be retrofitted) |
| Display | Power: 2 x LED, green; Switching status: 2 x LED, yellow |
| Teach function | yes |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |
รหัสสินค้า: IFS203
รหัสสินค้า: EVT406
รหัสสินค้า: IG5526
รหัสสินค้า: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
