Chưa cập nhật
物料编码: 131150435
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Cảm biến an toàn điện tử Schmersal 101204612.
物料编码
101204612
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | 101204612 |
| Mã đặt hàng Schmersal | 101204612 |
| Model Schmersal | CSS 11-30S-D-M-ST |
| Working principle | inductive |
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Housing material | Stainless steel |
| Reaction time, maximum | 60 ms |
| Duration of risk, maximum | 60 ms |
| Gross weight | 245 g |
| Diagnostic output | Yes |
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Safety functions | Yes |
| Cascadable | Yes |
| Integral system diagnostics, status | Yes |
| Number of LEDs | 2 |
| Number of semi-conductor outputs with signaling function | 1 |
| Number of fail-safe digital outputs | 2 |
| Number of series-wiring of sensors | 31 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 3.60 x 10−9 /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Actuating panels | from head |
| Active area | front side |
| Switch distance, typical | 11 mm |
| Assured switching distance "ON" Sao | 8 mm |
| Assured switching distance "OFF" Sar | 15 mm |
| Note (switching distance) | All switching distances in accordance EN IEC 60947-5-3 |
| Hysteresis (Switching distance), maximum | 2 mm |
| Repeat accuracy R | 1 mm |
| Note (length of the sensor chain) | Cable length and cross-section change the voltage drop dependiing on the output current |
| ISO thread of the sensor | M30 |
| Length of sensor | 99.5 mm |
| IP Degree of protection | IP65 IP67 IP69 |
| Ambient temperature | -25 ... +65 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Resistance to vibrations | 10 ... 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection class | II |
| Rated insulation voltage Ui | 32 VAC/DC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Operating voltage | 24 VDC -15 % / +10 % |
| No-load supply current I0, typical | 100 mA |
| Rated operating voltage | 24 VDC |
| Operating current | 600 mA |
| Required rated short-circuit current | 100 A |
| Switching frequency, approx. | 3 Hz |
| Rated operating current (safety outputs) | 250 mA |
| Output current, (fail-safe output), maximum | 0.25 A |
| Design of control elements | p-type | p-type |
| Voltage drop Ud, maximum | 0.5 V | 5 V |
| Leakage current Ir, maximum | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC | 24 VDC |
| Current, Utilisation category DC-12 | 0.25 A | 0.05 A |
| Voltage, Utilisation category DC-13 | 24 VDC | 24 VDC |
| Current, Utilisation category DC-13 | 0.25 A | 0.05 A |
| Interfering radiation | IEC 61000-6-4 |
| EMC rating | IEC 61000-6-2 |
| PIN 1 | 1A1 Ue: (1) |
| PIN 2 | X1 Safety input 1 |
| PIN 3 | A2 GND |
| PIN 4 | Y1 Safety output 1 |
| PIN 5 | OUT Diagnostic output |
| PIN 6 | X2 Safety input 2 |
| PIN 7 | Y2 Safety output 2 |
| PIN 8 | IN without function |
| Recommendation (actuator) | CST 30S-1 |
| Recommended safety switchgear | PROTECT PSC1 SRB-E-201LC SRB-E-301ST |
| Note (General) | Evaluation requirements: The switch-off pauses of 250 μs – 1500 μs must be tolerated by the evaluation.The switch-off time of the safety sensor of 250 μs is additionally extended according the cable length and the capacity of the cable used. Typical |
物料编码: 131150435
物料编码: 151180590
物料编码: 103040784
物料编码: 101133843
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
