Chưa cập nhật
物料编码: 131150435
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Khóa liên động điện từ Schmersal 101164207.
物料编码
101164207
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | 101164207 |
| Mã đặt hàng Schmersal | 101164207 |
| Model Schmersal | AZM 161SK-12/12RK-024 |
| Coding level according to EN ISO 14119 | Low |
| Working principle | electromechanical |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Colour of the upper part of the enclosure | Black |
| Colour of the bottom part of the enclosure | black |
| Gross weight | 450 g |
| Power to unlock | Yes |
| Increased latching force | Yes |
| Manual release | Yes |
| Number of actuating directions | 3 |
| Number of auxiliary contacts | 2 |
| Number of safety contacts | 4 |
| Performance Level, up to | c | d | e |
| Category | 1 | 3 |
| Note | Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit. | The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab. | All indications including the conductor ferrules. |
| Please note: | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Note (Performance Level) | Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions. |
| Interlocking principle | Power to unlock |
| Unlocking | Twist-to-unlock mechanism (auxiliary release) |
| Actuating play in direction of actuation | 5.5 mm |
| Holding force FZh in accordance with EN ISO 14119 | 2,000 N |
| Holding force Fmax, maximum | 2,600 N |
| Latching force | 30 N |
| Positive break travel | 10 mm |
| Positive break force per NC contact, minimum | 10 N |
| Positive break force, minimum | 20 N |
| Actuating speed, maximum | 2 m/s |
| Mounting | Screws |
| Type of the fixing screws | 3x M5 |
| Type of the screw head | Flat head screw |
| Tightening torque of the fastening screws for the housing cover | 0.6 Nm |
| Cable entry | 4 x M16 x 1,5 |
| Cable section, minimum | 0.25 mm2 |
| Cable section, maximum | 1.5 mm2 |
| Tightening torque of electrical connection, minimum | 0.4 Nm |
| Tightening torque of electrical connection, maximum | 0.5 Nm |
| Allowed type of cable | flexible solid multi-wire solid single-wire |
| Terminal (mechanical) | Screw terminals |
| Tool for the connection | SL 0.6 x 3.5 mm |
| Strip length | 7 mm |
| Length of sensor | 30 mm |
| Width of sensor | 130 mm |
| Height of sensor | 90 mm |
| IP Degree of protection | IP67 |
| Ambient temperature | -30 ... +60 °C |
| Storage and transport temperature | -30 ... +85 °C |
| Note (Relative humidity) | non-condensing non-icing |
| Protection class | II |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Rated insulation voltage Ui | 250 VAC |
| Rated impulse withstand voltage Uimp | 4 kV |
| Thermal test current | 6 A |
| Rated control voltage | 24 VAC/DC |
| Required rated short-circuit current | 1,000 A |
| Electrical power consumption, maximum | 10 W |
| Switching element | Magnet: 1 NO contact, 2 NC contacts / Actuator: 1 NO contact, 2 NC contacts |
| Switching principle | slow action, positive break NC contact |
| Maximum switching frequency | 1,000 /h |
| Material of the contacts, electrical | Silver |
| Magnet switch-on time | 100 % |
| Test pulse duration, maximum | 5 ms |
| Test pulse interval, minimum | 50 ms |
| Voltage, Utilisation category AC-15 | 230 VAC | 230 VAC |
| Current, Utilisation category AC-15 | 4 A | 4 A |
| Voltage, Utilisation category DC-13 | 24 VDC | 24 VDC |
| Current, Utilisation category DC-13 | 2.5 A | 2.5 A |
| Note (applications) | hinged safety guard removable guard sliding safety guard |
| Note (Manual release) | For manual release using M5 triangular key, available as accessory Manual release from side |
物料编码: 131150435
物料编码: 151180590
物料编码: 103040784
物料编码: 101133843
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
