Chưa cập nhật
物料编码: 131150435
- 单位
- Chưa cập nhật
正在加载内容…
正在加载内容…
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
Mô-đun rơ le an toàn Schmersal 101170049.
物料编码
101170049
单位
Chưa cập nhật
供货状态
联系报价
需求数量 (Chưa cập nhật)
无需在线付款。TESFA 会核对物料代码、数量和供货条件，并根据您的联系方式回复报价。
对于 MRO 物料，确认正确型号比只看图片更重要。TESFA 会在确认报价前核对关键技术点。
| 属性 | 产品规格 |
|---|---|
| Mã sản phẩm | 101170049 |
| Mã đặt hàng Schmersal | 101170049 |
| Model Schmersal | AES 1235 |
| Notice | Discontinued product | for max. 50,000 switching cycles/year and max. 80% contact load |
| Climatic stress | BG-GS-ET-14 EN 60068-2-3 |
| Housing material | Glass-fibre reinforced thermoplastic, ventilated |
| Gross weight | 240 g |
| Wire breakage detection | Yes |
| Cross-circuit detection | Yes |
| Feedback circuit | Yes |
| Automatic reset function | Yes |
| Reset after disconnection of supply voltage | Yes |
| Earth connection detection | Yes |
| Integral system diagnostics, status | Yes |
| Number of LEDs | 1 |
| Number of normally closed (NC) | 2 |
| Number of normally open (NO) | 1 |
| Number of undelayed semi-conductor outputs with signaling function | 2 |
| Number of safety contacts | 2 |
| Number of signalling outputs | 2 |
| Stop-Category | 0 |
| Performance Level, up to | d |
| Category | 3 |
| PFH value | 1.00 x 10−7 /h |
| Safety Integrity Level (SIL), suitable for applications in | 2 |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| Terminal designations | IEC/EN 60947-1 |
| Cable section, minimum | 0.25 mm2 |
| Cable section, maximum | 2.5 mm2 |
| Tightening torque of Clips | 0.6 Nm |
| Allowed type of cable | flexible solid single-wire |
| Terminal (mechanical) | Screw terminals |
| Width | 22.5 mm |
| Height | 100 mm |
| Depth | 121 mm |
| IP Degree of protection of the enclosure | IP40 |
| IP Degree of protection of the installation space | IP54 |
| IP Degree of protection of clips or terminals | IP20 |
| Ambient temperature | +0 ... +55 °C |
| Storage and transport temperature | -25 ... +70 °C |
| Resistance to vibrations | 10...55 Hz, Amplitude 0.35 mm, ± 15 % |
| Restistance to shock | 30 g / 11 ms |
| Rated impulse withstand voltage Uimp | 4 kV |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Frequency range | 50 Hz 60 Hz |
| Operating voltage | 24 VAC -15 % / +10 %24 VDC -10 % / +20 % |
| Ripple voltage | 10 % |
| Thermal test current | 6 A |
| Rated operating voltage | 24 VAC | 24 VDC |
| Rated AC voltage for controls, 50 Hz, minimum | 20.4 VAC |
| Rated control voltage at AC 50 Hz, maximum | 26.4 VAC |
| Rated AC voltage for controls, 60 Hz, minimum | 20.4 VAC |
| Rated control voltage at AC 60 Hz, maximum | 26.4 VAC |
| Rated AC voltage for controls at DC minimum | 20.4 VDC |
| Rated control voltage at DC, maximum | 28.8 VDC |
| Electrical power consumption | 5 W |
| Contact resistance, maximum | 0.1 Ω |
| Note (Contact resistance) | in new state |
| Drop-out delay in case of power failure, typically | 80 ms |
| Drop-out delay in case of emergency, typically | 20 ms |
| Pull-in delay at automatic start, maximum, typically | 100 ms |
| Pull-in delay at RESET, typically | 20 ms |
| Material of the contacts, electrical | Ag-Ni 10 and 0.2 μm gold-plated |
| Voltage, Utilisation category AC-15 | 230 VAC |
| Current, Utilisation category AC-15 | 6 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 6 A |
| Switching capacity, minimum | 10 VDC | 10 mA |
| Switching capacity, maximum | 250 VAC | 8 A | 24 VDC | 2 A |
| Input signal, HIGH Signal "1" | 10 ... 30 VDC |
| Input signal, LOW Signal "0" | 0 ... 2 VDC |
| Conduction resistance, maximum | 40 Ω |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.1 A |
| EMC rating | EMC-Directive |
| Note (ISD -Faults) | The following faults are registered by the safety monitoring modules and indicated by ISD. |
| Faults | Cross-wire or short-circuit monitoring of the switch connections Failure of door contacts to open or close Failure of the safety relay to pull-in or drop-out Fault on the input circuits or the relay control circuits of the safety monitoring module Interruption of the switch connections |
| Note (applications) | Guard system Safety sensor |
| Note (General) | Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit. |
物料编码: 131150435
物料编码: 151180590
物料编码: 103040784
物料编码: 101133843
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
