Đo áp suất
품목 코드: QPL25.050
- 단위
- Cái
콘텐츠 불러오는 중…
콘텐츠 불러오는 중…
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.
Module ngõ ra số SIEMENS 6ES7522-1BL10-0AA0. General information / Tên kiểu sản phẩm: DQ 32x24VDC/0.5A BA; General information / HW functional status: FS01; General information / Firmware version: V1.0.0.
품목 코드
6ES7522-1BL10-0AA0
단위
Chưa cập nhật
공급 상태
견적 문의
필요 수량 (Chưa cập nhật)
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.
| 속성 | 제품 사양 |
|---|---|
| Mã sản phẩm | 6ES7522-1BL10-0AA0 |
| Tên gọi chính hãng | SIMATIC S7-1500/ET 200MP, digital output module, DQ 32x24 V DC/0.5 A BA (25 mm); sourcing output; 32 channels in groups of 8; 4 A per group (0.5 A per channel); safety-oriented switching off of load groups up to SIL 2 according to EN IEC 62061:2021 and category 3/PL d according to EN ISO 13849-1:2015; including U-connector and front connector push-in |
| General information / Tên kiểu sản phẩm | DQ 32x24VDC/0.5A BA |
| General information / HW functional status | FS01 |
| General information / Firmware version | V1.0.0 |
| General information / FW update possible | Yes |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Product function / Prioritized startup | Yes |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V13 / V13 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | V2.3 / - |
| General information / Operating mode / DQ | Yes |
| General information / Operating mode / DQ with energy-saving function | No |
| General information / Operating mode / PWM | No |
| General information / Operating mode / Oversampling | No |
| General information / Operating mode / MSO | Yes |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes; through internal protection with 7 A per group |
| Input current / Current consumption, max. | 60 mA |
| Output voltage / Rated value (DC) | 24 V |
| Power / Power consumption from the backplane bus | 1.15 W |
| Power loss / Power loss, typ. | 3.8 W |
| Digital outputs / Type of digital output | Transistor |
| Digital outputs / Số ngõ ra số | 32 |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | No |
| Short-circuit protection | Yes |
| Response threshold, typ. | 1 A |
| Limitation of inductive shutdown voltage to | L+ (-53 V) |
| Controlling a digital input | Yes |
| Switching capacity of the outputs / with resistive load, max. | 0.5 A |
| Switching capacity of the outputs / on lamp load, max. | 5 W |
| Load resistance range / lower limit | 48 Ω |
| Load resistance range / upper limit | 12 k Ω |
| Output voltage / for signal "1", min. | L+ (-0.8 V) |
| Output current / for signal "1" rated value | 0.5 A |
| Output current / for signal "1" permissible range, max. | 0.5 A |
| Output current / for signal "0" residual current, max. | 0.5 mA |
| Output delay with resistive load / "0" to "1", max. | 100 μs |
| Output delay with resistive load / "1" to "0", max. | 500 μs |
| Parallel switching of two outputs / for logic links | Yes |
| Parallel switching of two outputs / for uprating | No |
| Parallel switching of two outputs / for redundant control of a load | Yes |
| Switching frequency / with resistive load, max. | 100 Hz |
| Switching frequency / with inductive load, max. | 0.5 Hz; According to IEC 60947-5-1, DC-13 |
| Switching frequency / on lamp load, max. | 10 Hz |
| Total current of the outputs / Current per channel, max. | 0.5 A; see additional description in the manual |
| Total current of the outputs / Current per group, max. | 4 A; see additional description in the manual |
| Total current of the outputs / Current per module, max. | 16 A; see additional description in the manual |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Interrupts/diagnostics/status information / Diagnostics function | No |
| Interrupts/diagnostics/status information / Substitute values connectable | No |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | No |
| Interrupts/diagnostics/status information / Alarms / Maintenance interrupt | No |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage | No |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | No |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | No |
| Interrupts/diagnostics/status information / Diagnoses / Group error | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / RUN LED | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / ERROR LED | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | No |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels, in groups of | 8 |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Security / signed firmware update | No |
| Security / data integrity | No |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions / Chiều rộng | 25 mm |
| Dimensions / Chiều cao | 147 mm |
| Dimensions / Chiều sâu | 129 mm |
| Weights / Khối lượng xấp xỉ | 280 g |
| Other / Note: | Supplied incl. 40-pole push-in front connectors |
품목 코드: QPL25.050
품목 코드: QPL25.500B
품목 코드: SQM45.295B9
품목 코드: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
