품목 코드: QPL25.050
- 단위
- Cái
콘텐츠 불러오는 중…
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.

Module ngõ vào số SIEMENS 6ES7131-4BD01-0AA0. Supply voltage / Rated value (DC): 24 V; From power module; Supply voltage / Reverse polarity protection: Yes; Input current / from supply voltage L+, max.: Dependent on encoder.
품목 코드
6ES7131-4BD01-0AA0
단위
Chưa cập nhật
공급 상태
Liên hệ báo giá
필요 수량 (Chưa cập nhật)
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.
| 속성 | 제품 사양 |
|---|---|
| Mã sản phẩm | 6ES7131-4BD01-0AA0 |
| Tên gọi chính hãng | *** Spare part *** SIMATIC DP, 5 electronic modules for ET 200S, 4DI standard 24 V DC, 15 mm width, 5 units per packing unit |
| Supply voltage / Rated value (DC) | 24 V; From power module |
| Supply voltage / Reverse polarity protection | Yes |
| Input current / from supply voltage L+, max. | Dependent on encoder |
| Input current / from backplane bus 3.3 V DC, max. | 10 mA |
| Encoder supply / Type of output voltage | min. L+ (-0.5 V), under load |
| Encoder supply / Output current / Giá trị định mức | 500 mA |
| Encoder supply / Output current / permissible range, lower limit | 0 mA |
| Encoder supply / Output current / permissible range, upper limit | 500 mA |
| Power loss / Power loss, typ. | 0.7 W |
| Address area / Address space per module / Address space per module, max. | 1 byte |
| Address area / Address space per module / with packing | 4 bit |
| Digital inputs / Số ngõ vào số | 4 |
| Digital inputs / Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| Digital inputs / Input voltage / Type of input voltage | DC |
| Digital inputs / Input voltage / Rated value (DC) | 24 V |
| Digital inputs / Input voltage / for signal "0" | -30 to +5 V |
| Digital inputs / Input voltage / for signal "1" | +15 to +30 V |
| Digital inputs / Input current / for signal "1", typ. | 7 mA; at 24 V |
| Input delay (for rated value of input voltage) / for standard inputs / parameterizable | No |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", min. | 2 ms; typically 3 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max. | 4.5 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", min. | 2 ms; typically 3 ms |
| Input delay (for rated value of input voltage) / for standard inputs / at "1" to "0", max. | 4.5 ms |
| Digital inputs / Cable length / shielded, max. | 1 000 m |
| Digital inputs / Cable length / unshielded, max. | 600 m |
| Connectable encoders / 2-wire sensor | Yes |
| Connectable encoders / permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Interrupts/diagnostics/status information / Diagnostics function | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Group error SF (red) | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Status indicator digital input (green) | Yes; per channel |
| Potential separation / Potential separation digital inputs / between the channels | No |
| Potential separation / Potential separation digital inputs / between the channels and backplane bus | Yes |
| Isolation / Isolation tested with | 500 V DC |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 81 mm |
| Dimensions / Chiều sâu | 52 mm |
| Weights / Khối lượng xấp xỉ | 35 g |
품목 코드: QPL25.050
품목 코드: QPL25.500B
품목 코드: SQM45.295B9
품목 코드: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.